List of documents for the eightieth session of the Working Party on Passive Safety scheduled for Geneva, 7–11 December 2026. Documents include proposals for:

• Amendment 3 to UN GTR 1,
• A new UN Regulation for M₂ and M₃ vehicles to prevent children being left inside,
• A 05 series of amendments to UN R11,
• A 02 series of amendments to UN R21,
• Supplement 4 to the 06 series of amendments to UN R22,
• A 06 series of amendments to UN R129,
• Supplement 2 to the 03 series of amendments to UN R134,
• Supplement 03 to the 01 series of amendments to UN R145,
• Supplement 1 to the 01 series of amendments to UN R170,
• A 02 series of amendments to UN R173,
• A new UN Regulation for category N₁ vehicles regarding fuel system integrity and crash compatibility,
• Supplement 3 to the original series of amendments to UN R42,
• Supplement 5 to the 04 series of amendments to UN R127,
• Amendments to UN Regulations Nos. 11, 12, 14, 16, 17, 21, 94, 95, 100, 127, 134, 135, 137, 153, 173, 174 and 184.

Provisional agenda for GRSP’s eightieth session to be held 7–11 December 2026 in Geneva. The session will address UN Global Technical Regulations No. 1, 13, and 20; UN Regulations Nos. 11, 17, 21, 22, 95, 100, 127, 129, 134, 145, 170, 173, and 174; a new UN Regulation and authorization request for a GTR on children left in vehicles; collective amendments to UN Regulations affecting automated vehicles; Mutual Resolution No. 1; equitable occupant protection; and other business items including vehicle automation, software updates, airbags, child restraint systems, and bus protection.

Proposal to:

• Amend the table of contents,
• Insert new Part I-2 on Phase 2 covering background and technical rationale for thermal propagation,
• Modify para. 3.42. to add a note on pulsating DC voltages,
• Amend paras. 5.4.12. to 5.4.12.1. and 7.3.12. to 7.3.12.1. to establish thermal propagation compliance options including test and risk management approaches,
• Insert new paras. 5.4.12.3. to 5.4.12.3.2.4. and 7.3.12.3. to 7.3.12.3.2.3.,
• Insert new paras. 6.2.12. to 6.2.12.6. and 8.2.11. to 8.2.11.6. specifying thermal propagation test procedures,
• Insert new Annex 3 with five appendices detailing five initiation methods: localized external rapid heater, internal heater method 1, internal heater method 2, nail penetration, and laser-based initiation.

Final status report on Amendment 1 to UN GTR No. 20, adopted by GRSP at its seventy-ninth session. The amendment addresses thermal propagation in rechargeable electrical energy storage systems through two compliance paths: a physical test approach with 5 initiation methods, and a risk management approach documenting thermal propagation risks and risk mitigation at cell, REESS, or vehicle level. Phase 2 scope included water immersion, fire resistance, REESS rotation and vibration, vented gas characterization, thermal propagation methods, post-crash safety assessment, light electric vehicles, charging protection, and overcurrent requirements. Unregulated areas for Phase 3 include V2X applications, swappable batteries, micromobility, and quantitative criteria on gas and smoke properties.

Proposal to amend para. 9.(a) to clarify expansion of the protection scope of electrical and battery safety, including thermal propagation in cases of V2X, parking, and charging. The modification addresses new vehicle functionalities like V2X, defined in UN GTR No. 22, where traction batteries cover external power and energy demand. Additional requirements must be added, including isolation resistance requirements for coupling systems for charging the REESS, as defined in para. 5.1.1.2.4.4. of UN GTR No. 20.

The document presents an update on the amendment of GTR No. 20 concerning new requirements on thermal propagation. CPs/sponsors agreed to delete para. 265, which was considered redundant in view of paras. 263 and 264. The amendment addresses flammability, toxicity, and corrosiveness of vented gas, with final endorsement by GRSP expected in June 2026 and adoption by WP.29 in November 2026.

Proposal to amend UN Global Technical Regulation No. 20 on electric vehicle safety, focusing on thermal propagation triggered by single-cell thermal runaway. The amendment introduces two compliance paths: a physical test approach with five initiation methods (external heater, internal heaters, nail penetration, laser-based initiation) performed at vehicle or component level; and a risk management approach requiring manufacturers to document known risks and mitigation strategies. Vehicles must provide advance warning 5 minutes before hazardous conditions (fire, explosion, smoke) occur in the passenger compartment. Phase 2 discussions concluded that water immersion tests, long-term fire resistance tests, REESS rotation tests, vibration profile modifications, AC/DC charging protections, and heavy-duty overcurrent tests do not require regulatory inclusion based on available field evidence and safety analysis.

Proposal to finalize a status report on Amendment 1 to UN Global Technical Regulation No. 20 on electric vehicle safety. The IWG-EVS conducted Phase 2 work addressing topics including water immersion tests, fire resistance, battery rotation and vibration, thermal propagation, and charging safety. The group maintained existing regulatory text except for thermal propagation provisions. Two compliance paths were developed: a physical test method with five initiation options and a risk management approach. Phase 3 will address thermal propagation scope expansion, post-crash safety, in-use battery maintenance, swappable batteries, light vehicles, gas emissions criteria, and bottom protection.

Draft request prepared by the EU proposing a Phase 3 covering:

1. Expansion of protection scope of thermal propagation test;
2. Post-crash REESS safety assessment, stabilization procedures and nonoccupant and surroundings safety;
3. Maintaining the EV battery safety during the in-use phase;
4. Safety of swappable batteries;
5. Micromobility, light-category vehicles, e-trailers safety;
6. Quantitative criteria on flammability, toxicity and corrosiveness of vented gases and smoke; and
7. Bottom protection.