Proposal to amend GRVA/2026/27, which proposes amendments to UN R13, UN R13-H, UN R79, UN R89, UN R130, UN R131, UN R139, UN R140, UN R152, UN R156, UN R157, UN R171, UN R175, and UN R178:

• Throughout these regulations, amend references to the Consolidated Resolution on the Construction of Vehicles (R.E.3) as document ECE/TRANS/WP.29/78/Rev.8,
• insert new definitions for Software Identification Numbers referring to R.E.3 Annex 7 para. 2,
• amend requirements for software identification to require manufacturers provide necessary information allowing Technical Services to uniquely identify hardware and software configurations,
• insert new provisions allowing vehicle manufacturers to apply for new approvals differentiating software versions for vehicles already registered in the market from new vehicles,
• amend production discontinuation provisions to clarify production is not considered definitively discontinued if manufacturer intends to obtain subsequent extensions of approval for software updates of registered vehicles,
• insert new items in annexes regarding additional information on software identification and software updates including R_xSWIN identification, whether held on vehicle, how to read if not held on vehicle, and relevant parameters for vehicle identification.

Proposed changes to align RxSWIN provisions with the RxSWIN template adopted through WP.29-197-06, remove the proposed requirement to comply with UN R156/01 or later from R157 and R171, remove amendments to UN R155 as decided by the IWG CS/OTA, apply the RxSWIN amendments also to earlier series of amendments in R13, R13-H, R79, R131, R152, R157, and R171, update references to the latest version of R.E.3, ECE/TRANS/WP.29/78/Rev.8, in earlier series, and correct paragraph references and improve structure in R89, R139, R140, R155, R156, and R171.

Proposal to insert provisions on Software Identification Numbers and software updates across UN R13, R13-H, R79, R89, R130, R131, R152, R155, R156, R157, R171, R175, and R178 by adding definitions referencing Consolidated Resolution R.E.3 Annex 7 paragraph 2, requiring manufacturers to provide Technical Services with information on hardware and software influencing performance with test reports, permitting vehicle manufacturers to apply for new approvals differentiating software versions for registered vehicles from new vehicles where type approval regulations are updated or hardware changes occur in series production with test duplication avoided where possible, clarifying that production is not considered definitively discontinued if manufacturers obtain subsequent extensions for software updates of registered vehicles, renumbering and inserting new items in approval communication annexes for R13SWIN, R13-HSWIN, R79SWIN, R89SWIN, R130SWIN, R131SWIN, R152SWIN, R155SWIN, R157SWIN, R171SWIN, R175SWIN, and R178SWIN information including whether held on vehicle and relevant parameter identification lists, and amending R157 and R171 to align software update requirements with R156 technical specifications and transitional provisions.

Proposal to insert provisions on software identification and software updates into UN R13, UN R13-H, UN R79, UN R89, UN R130, UN R131, UN R152, UN R156, UN R157, UN R171, UN R175, and UN R178 by adding definitions referencing Consolidated Resolution R.E.3 Annex 7, requiring manufacturers to provide Technical Services with information on hardware and software influencing performance, permitting vehicle manufacturers to apply for new approvals differentiating software versions for registered versus new vehicles, clarifying that production discontinuation does not apply when manufacturers seek approval extensions for software updates of registered vehicles, and amending communication forms to include software identification numbers and related information.

Proposal to insert provisions on software identification and software updates into UN R13, UN R13-H, UN R79, UN R89, UN R130, UN R131, UN R152, UN R155, UN R156, UN R157, UN R171, UN R175, and UN R178 by adding definitions referencing Consolidated Resolution R.E.3 Annex 7, requiring manufacturers to provide Technical Services with information on hardware and software influencing performance, permitting vehicle manufacturers to apply for new approvals differentiating software versions for registered versus new vehicles, clarifying that production discontinuation does not apply when manufacturers seek approval extensions for software updates of registered vehicles, and amending communication forms to include software identification numbers and related information.

Proposal to amend UN R13, 13-H, 79, 89, 130, 131, 139, 140, 152, 155, 156, 157, 171, 175, and 178 by introducing provisions on software identification and software updates. Amendments add new paragraphs referring to Software Identification Number definitions in Consolidated Resolution R.E.3, require manufacturers to provide Technical Services with information on hardware and software influencing performance, permit vehicle manufacturers to apply for new approvals differentiating software versions for registered versus new vehicles while avoiding test duplication, and modify production discontinuation provisions to exclude cases where manufacturers seek approval extensions for software updates of registered vehicles.

Proposal to clarify that the Regulation does not apply to vehicles of categories X and Y, add an alternative approval pathway for certain vehicles using UN R152 requirements, allow continued extension of approvals for 12 months, amend paragraph 10 of Annex 1, and revise Annex 2 (approval mark arrangements).