Proposal to amend UN R18, UN R39, UN R46, UN R55, UN R58, UN R67, UN R73, UN R93, UN R97, UN R102, UN R105, UN R107, UN R110, UN R116, UN R121, UN R122, UN R125, UN R144, UN R147, UN R151, UN R158, UN R159, UN R160, UN R161, UN R162, UN R163, UN R166, UN R169, UN R176, UN R181, UN R182 and UN R183:

• Add new paragraphs defining Software Identification Number by reference to Consolidated Resolution on the Construction of Vehicles (R.E.3) Annex 7, para. 2,
• amend paragraphs concerning production discontinuation to clarify that production is not considered definitively discontinued if vehicle manufacturers intend to obtain subsequent extensions of approval for software updates of vehicles already registered in the market,
• add new paragraphs requiring manufacturers to provide Technical Services with information on all hardware and software having an influence on performance,
• add new paragraphs allowing vehicle manufacturers to apply for new vehicle approvals to differentiate software versions for vehicles already registered in the market from those for new vehicles,
• add new paragraphs to approval forms requesting additional information regarding software identification and software updates, including whether Software Identification Number is held on the vehicle and relevant parameters for identification of vehicles that can be updated with the represented software.

Proposal to amend Annex 4D, para. 2.4., to clarify the endurance test procedure for CNG pressure regulators by specifying that the outlet of the regulator shall be plugged during the cycling of inlet pressure from 100 per cent to 50 per cent of service pressure at room temperature. The regulator shall withstand 50,000 cycles without failure and be leak proof at specified temperatures upon test completion.

Proposal to insert new paras. 0. and 0.1. to 0.1.3. to introduce Supplement 2 to the 06 series of amendments to take into account vehicles of categories X and Y and conventional vehicles equipped with an Automated Driving System, amend para. 1 and Annex 4F footnote 1 to reference the Consolidated Resolution on the Construction of Vehicles, insert new para. 4.79. defining “occupant compartment”, amend para. 7 footnote 11 and para. 12 footnote 12 to reference the Consolidated Resolution on the Construction of Vehicles, and amend paras. 18.1.7., 18.3.1.15., 18.5.5.1., 18.5.5.7., 18.8.7., and 18.10.2. to include provisions relating to occupant compartment and heating systems.

Proposal clarifies the test procedure of endurance test for pressure regulators.

Proposal to enable application of the Regulation to ADS vehicles.

Proposal to enable the application to ADS vehicles, including exemptions of vehicles of subcategories X and/or Y from certain provisions concerning manual driving, attention to non-DDT tasks otherwise performed by the driver, introduction of provisions for “ADS features of type 1 and type 2”, and to update provisions concerning the running mass and occupants.