Draft 07 series of amendments to Regulation No. 107
Draft Supplement 5 to the 06 series of amendments to Regulation No. 107
Draft Supplement 5 to the 05 series of amendments to Regulation No. 107
Draft Supplement 5 to Regulation No. 60
Draft 02 series of amendments to Regulation No. 110
Draft Supplement 1 to the 01 series of amendments to Regulation No. 125

Revised proposal as adopted by the 109th GRSG session to revise the provisions for welded constructions of compressed natural gas (CNG) cylinders or metal liners, including high-strength steel CNG cylinders. This proposal has been integrated with the proposal to regulate the discharge direction of pressure relief devices on CNG containers adopted by the 108th session. This document will be submitted as a revision to WP.29/2015/90 at the November 2015 World Forum session.

Proposal as adopted by the 109th GRSG session to revise the provisions for welded constructions of compressed natural gas (CNG) cylinders or metal liners, including high-strength steel CNG cylinders. This proposal has been integrated with the proposal to regulate the discharge direction of pressure relief devices on CNG containers adopted by the 108th session. This document will be submitted as a revision to WP.29/2015/90 at the November 2015 World Forum session.

Amendments by Japan to its proposal to remove the provisions for welded constructions of compressed natural gas (CNG) cylinders or metal liners, including high-strength steel CNG cylinders.

Proposal to regulate the discharge direction of pressure relief devices on CNG containers.

Proposal to correct the numbering of chapter 18 following the introduction of provisions for automatic valves.

Proposal to remove the provisions for welded constructions of compressed natural gas (CNG) cylinders or metal liners, including high-strength steel CNG cylinders.

Proposal to enable the use of autonomous CNG heaters for the heating of engines before the vehicle is in service.

Pursuant to the proposal to enable the use of autonomous compressed natural gas (CNG) heaters for the purpose of heating the engine coolant under UN R110, this proposal would require that the alarm system and fire suppression system (required through paragraph 7.5.1.5. as amended by Supplement 4 to 06 series of amendments) be activated as soon as the heater is in function and even if the engine is not operational.

Proposal to require an exterior protection on cylindrical gas tanks. Under the current regulation, such exterior protection may be fitted at the discretion of the manufacturer. The intention is to increase protection against corrosion of cylinders in response to a corroded cylinder explosion in Germany.

Proposal to establish an informal working group to consolidate existing amendments to UN Regulation No. 110 in light of technical progress of other gaseous fuel regulations and standards and, where necessary, amend the Regulation to promote improved clarity and harmonization.

Proposal to enable the use of autonomous CNG heaters for the heating of engines before the vehicle is in service.

Proposal for improvements to marking provisions and changes to high-strength steel specifications pursuant to the deliberations of the Japanese ’Study Group for CNG Cylinders/LNG Tanks’, a stakeholder expert group.

Proposal to correct the numbering of chapter 18 following the introduction of provisions for automatic valves.

Proposal to regulate the direction of discharging the pressure relief devices of CNG containers.