Report on the status of deliverables to 79th GRSP session. Expected deliverables include working documents for transposition of optional part of GTR13 on liquified hydrogen (December 2025), updating ISO 17268-1:2025 reference for receptacle geometry (December 2025), and incorporating periodic inspection requirements into UN Regulation No. 134 (May 2026, WP.29-2026-56e). Additional deliverables include recommendations for IWG GTR 13 Phase 3 and way forward for material compatibility requirements (July 2026). TF-H2 also recommended clarifications to UN-R 134/03 regarding ‘appropriate adaptor’ definition and changes to related paragraphs, with informal document due December 2026.

Test agencies raised concerns about hydrogen fuel safety testing. Agencies were concerned they might not know adapter material and fitting configuration in advance of performing the test. One agency suggested adapter material should at least be the same strength as original valve material. Another agency expressed concern that adapter materials could be affected by hydraulic fluid. Most test agencies agreed there are likely no issues with pressure and temperature development of test fluid from small diameter supply lines. One agency stated flow restriction would create high temperatures that would undermine the cold cycling test. Another agency suggested pressure drop in supply line(s) can be accommodated by mandating a 1 to 2 second hold at maximum pressure during a cycle.

Test agencies expressed concern about knowing the material and fitting configuration of adapters in advance of testing. One agency suggested adapter material should match the original valve material strength. Agencies agreed small diameter supply lines present no pressure and temperature issues but suggested mandating a one to two second hold at maximum pressure during cycles. Test agencies questioned whether adapters and TPRD plugs are considered part of the test and whether leakage constitutes failure. Components not covered by UN R134 should be tested per ISO 19887-1.

The agenda includes continuation of supply line discussions, corrections to UN R134/03, clarifications needed in UN R134/03 with responses from test labs, next steps, and scheduling of next meetings.

Proposal to establish a new UN Regulation on liquefied hydrogen storage systems (LHSS) for hydrogen-fuelled vehicles of categories M₂, M₃, N₂ and N₃, incorporating specifications for the LHSS, specific components including pressure relief devices and shut-off devices, and vehicle fuel system requirements with testing and approval procedures, based on GRSP/2025/41 and GRSP-78-15-Rev.1.