Supplementary agenda including references to all documents received prior to 9 September.

Proposal to add classifications covering agricultural trailers and towed agricultural machinery in the Consolidated Resolution on the Construction of Vehicles (R.E.3).

List of terms defined in regulations under the purview of the Working Party on Brakes and Running Gear presented to facilitate discussions on the harmonization of such terms and definitions.

Proposal to introduce a definition and provisions for lane-keeping assist systems (LKAS).

Proposal to clarify the provision for permissible deactivation of ABS systems under the proposal to clarify the use of Combined Braking Systems (CBS) under UN R78.

Proposal to clarify the provision for permissible deactivation of ABS systems under the proposal to clarify the use of Combined Braking Systems (CBS) under GTR No. 3.

European countries are considering new requirements to require the fitment of snow tyres for use in severe snow conditions on specific axles of heavy duty vehicles. New tyres are approved under UN R117; however, a large percentage of heavy duty vehicles are fitted with retreaded tyres which are outside the scope of UN R117. This proposal would transpose the relevant requirements for new snow tyres into UN R109 in order of avoid the exclusion of retreaded tyres from such applications/markets.

Change to the proposed text pursuant to agreement within the “LKAS Small Drafting Group” concerning the “means of detecting that the driver is likely to be no longer in primary control of the steering system” and related driver warning method(s).

Clarifications and corrections to document GRRF/2014/26 which proposes to alter the marking requirements of UN R54 to replace the PSI Index by the inflation pressure in kilopascals (“kPa”) and to add the possibility to put the “LT” marking as a prefix or suffix to align the requirements with current practice for C2 tyres with metric size designation.

Proposal to introduce lane-keeping assistance systems into the regulation. This document incorporates the agreed-upon definitions presented in document GRRF-78-05.

Proposed amendments to update the documents, especially with reference to obsolete deadlines and timelines, in light of the recent finalization of the GTR text.

Proposal to introduce general performance guidelines into the annex on automated driver assistance systems in order to set initial safety considerations to guide the commercialization of this emerging technology.

The expert group on UN R55 submitted document GRRF/2014/14 to update the requirements for mechanical couplings, including a proposal to replace the references to IS0 7641:1983 with ISO 7641:2012. In response to issues raised within GRRF, the experts prepared a new proposal (document GRRF/2014/28). This document would supplement the proposal by providing additional information on the differences between the 1983 and 2012 versions of ISO 7641.

Copy of the latest working draft of UN R55 containing amendments to introduce provisions for agricultural vehicle couplings as of 2 June 2014 (document TFAC-04-11).

Proposal to clarify the draft text to align UN R79 with UN R13-H concerning cases where the braking and steering systems have the same energy source. This proposal would clarify and reaffirm that where there is “a failure in the energy supply, the steering system shall have priority”.

Proposal to clarify the inflated run-flat tyres are within the scope of this regulation while uninflated run-flat tyres fall exclusively under UN R64 and to remove references to UN R64 since this regulation and UN R64 exist as independent parallel tyre regulations. The proposal seeks to improve the wording, including to align more closely with EU Regulation (458/2011).

Proposal to delete Annex 7 from the draft ESC regulation and replace the procedure for validating the test (road) surface condition with a reference to Appendix 6 to Annex 2 of UN R13-H. This change would ensure that the ESC regulation fully aligns with UN R13-H and with GTR No. 8 on ESC systems.

Explanation of OICA’s requests to exempt certain vehicles from mandatory AEBS and/or LDWS requirements due to their uses and the technical limitations of these systems. For example, the sensors used by the systems cannot operate reliably on certain special purpose equipment (such as snow plows) where the equipment and the nature of the operating environment are prohibitive.

Presentation on currently available and emerging driver-assistance technologies and their relation to the levels of vehicle automation (e.g., from full driver control to fully autonomous vehicle).

Proposal to modify the introductory comments of the LDWS regulation in order to emphasize the focus on highway driving and impracticality of deploying LDWS on certain types of vehicles such as off-road equipment or special purpose vehicles.

Proposal to modify the scope of the regulation in order to exempt certain vehicles from mandatory compliance with its provisions in cases where technical obstacles prevent the reliable use of lane-departure warning systems given the current state of the technology. This document includes a detailed explanation of the vehicle categories for exemption.

Proposal to modify the introductory comments of this regulation to explain the rationale for the exemption of certain vehicles from mandatory compliance with its requirements.

Proposal to modify the introductory comments in this regulation in order to explain the rationale behind the exemption of certain vehicles from mandatory compliance with its requirements.

Vehicle manufacturers are currently implementing AEBS on a large variety of models, e.g. to fulfil mandatory requirements of some Contracting Parties. This implementation work confirms the concerns which were brought up for discussion during the AEBS/LDWS informal group activities and sheds light on a number of technical issues that appeared when installing obstacle detection devices on some specific vehicles, in particular in case of huge technical diversity and where the vehicle environment can have negative impact on system reliability and on its ability to operate. This proposal would alter the regulation scope to exempt such vehicles from mandatory compliance.

Vehicle manufacturers are currently implementing AEBS on a large variety of models, e.g. to fulfil mandatory requirements of some Contracting Parties. This implementation work confirms the concerns which were brought up for discussion during the AEBS/LDWS informal group activities and sheds light on a number of technical issues that appeared when installing obstacle detection devices on some specific vehicles, in particular in case of huge technical diversity and where the vehicle environment can have negative impact on system reliability and on its ability to operate. This proposal would alter the regulation scope to exempt such vehicles from mandatory compliance.

This proposal was prepared by OICA and is based on the existing UN Regulation No. 64. It is aimed at moving the Tyre Pressure Monitoring System provisions into a separate Regulation.

This proposal was prepared by OICA and is based on the existing UN Regulation No. 64. It is aimed at moving the Tyre Pressure Monitoring System provisions in a separate Regulation.

Status report, including the current state of the draft text, on efforts to reach agreement on the introduction of provisions for electro-hydraulic systems into the test conditions for trailers with electrical braking systems.

Presentation discussing the framework for relating independent regulations on electronic subsystems of braking or steering systems to the primary braking/steering regulations.

Supporting explanation for the proposal to align UN R79 with UN R13-H concerning cases where the braking and steering systems have the same energy source. This proposal would clarify and reaffirm that where there is “a failure in the energy supply, the steering system shall have priority”.

Amendments to document GRRF/2013/20 (proposal to include ATV tires in the motorcycle and moped tire regulation in order to enable the type approval of tires designed to equip quadricycles covered by the new Regulation (EU) No. 168/2013).

Proposal to delete references to tire-pressure monitoring systems under UN R64 (with the intention to establish them as a stand-alone regulation). This document presents only the amendments and complements the earlier document GRRF-78-38 that presented the consolidated version of UN R64 amended as proposed here.

CLEPA proposed a framework for relating independent regulations on electronic subsystems of braking or steering systems to the primary braking/steering regulations. This proposal revises the wording, focusing on ESC systems with relation to the requirements for complex electronic control systems under Regulation 13-H.

For testing purposes, UN R90 defines a “test group” as a grouping of parts having the same characteristics. The regulation then defines a “variant” as a part within a “test group”. However, the approval numbers under the rule stipulate the identification of each variant certified. As a result, the text technically requires certification of each individual part (variant) which was not the intention of the drafters. CLEPA raises this for information purposes with the intention to put forward a proposal at the next GRRF session.

IMMA comments on the suggestion to include a cross reference to UN R10 in UN R78 in order to ensure that electromagnetic interference does not affect electronic brake modules in a way that causes unsafe brake operation as was adopted for UN R13.