Proposal from OICA, CLEPA, and CITA to amend CITA’s proposal to enable real-time reading of electrical transmission brake demand values via an electronic vehicle interface and an off-board electronic device during periodical technical inspections, including a 24-month transitional period.

Proposals to resolve issues with accepting the approval of M₂, M₃ and N₂ vehicles to Regulation No. 152.

Proposal to establish definitions for “e-axle”, “e-axle trailer” and “dynamo function” and to establish provisions for the approval of e-axle trailers with regard to their “dynamo function”.

Proposal to clarify that the tolerance for the speed of the pedestrian dummy crossing the vehicle path is 0.4 km/h across all the series of amendments.

Proposal to update the declaration of compliance and Certificate of Compliance models to communicate the relevant series of amendments to ensure alignment between the management systems and the corresponding requirements of UN R156.

Proposal to include information in the test report to identify the specific software installed on the vehicle(s) used for compliance testing under UN Regulations.

Proposal to increase the usability and safety of the system and to ensure that the technical requirements reflect the latest system capabilities.

Proposals to improve the text related to terminology across propulsion types (e.g., use of term “powertrain”) pursuant to similar improvements agreed via documents WP.20/2025/87 and 90.

Proposal from the CS/OTA informal group to update the interpretation document pursuant to amendments introduced via the 01 series of amendments to UN R156.

Proposal to introduce provisions for implementing the option (contained in footnote) for approval of certain “medium-duty” vehicles either under UN R152 (M₁/N₁) or UN R131 (M₂/N₂ /M₃). The proposal aims to clarify terms and establish procedures for demonstrating equivalent performance.

Proposal to clarify that the Emergency Stop Signal (ESS) may be generated by application of the service braking system via the Electronic Parking Brake (EPB) control.

Proposal to clarify that only one braking control (e.g., service braking control, parking brake control) shall be used for each test condition of the secondary braking effectiveness and to permit the selection of the braking control based on the vehicle load condition.

Proposal to allow the driver to slow down the remote parking manoeuvre, including coming to a stop, earlier than intended by the system.

Proposal to introduce transitional provisions pursuant to the adoption of Supplements by W.29 that inadvertently included changes to the approval requirements.

Proposal from the FADS task force to amend its proposal to enable the application of UN R79 to ADS vehicles.

Proposal from the FADS task force to amend its proposal to enable the application of UN R13-H to ADS vehicles.

Proposal from the FADS informal group to amend its proposal to enable the application of UN R13 to automated vehicles, including those without manual controls.

Proposal to reinstate the obligation for the granting approval authority to inform corresponding authorities of other Contracting Parties before issuing an approval for an ALKS intended to operate within those corresponding markets, including evidence of ALKS competency to comply with the prevailing traffic rules (in accordance with Annex 1-Appendix 2).

Proposal to require require manufacturers to provide a method for objectively determining the moment of “Risk Mitigation Function” (RMF) initiation to enable assessment of the RMF warning signals and other driver warnings, hazard lights, and indicators in relation to the objectively determined RMF initiation point.

Proposal to require technical services performing audits and certification of management systems under UN Regulations to comply with ISO/IEC 17021:2015.

Proposal to enable real-time reading of electrical transmission brake values during periodical technical inspections.

Proposal to enable real-time reading of electrical transmission brake demand values via an OBD connector and scan tool during periodical technical inspections.

Proposal to align UN R130 with the harmonised wording approved by WP.29 with regard to conditions for automatic reinstatement of a system at the “initiation of each engine start/run cycle”.

Proposal from the FADS informal working group to enable the type approval of ADS vehicles, including those without manual controls.

Proposal from the FADS informal group to introduce amendments to enable the type approval of ADS vehicles, including those without manual controls.

Proposal from the FADS informal group to introduce amendments to enable the application of UN R13 to automated vehicles, including those without manual controls.