Proposal to:
a) Align definitions and content with the other tyre regulations (UN Regulations Nos. 30, 54, 75 etc.);
b) Include a definition of “manufacturer” extracted from the resolution “R.E.3”;
c) Adopt a common definition and use of the terms “Manufacturer’s name”, “Brand name”, “Trademark”, “Trade description” and “Commercial name” and their links; and
d) Add information in the certificate to enable approval authorities to more easily understand the products the certificate addresses.

Proposal to modify the marking requirements to replace PSI with kilopascals (“kPa”). The intent is to harmonize the pressure indication and avoid confusion between UN Regulation No. 54 and US FMVSS 119 or FMVSS 139. The proposal would also change the measurement units for drum speed from min^-1 to km.h^-1 in alignment with the requirements with other tyre regulations and align the wording in Annex 7, Appendix 1 with the text of the Regulation.

Presentation on the Dutch-developed methodology for assessing the impact of changes to tyre and vehicle noise standards.

Paper describing the development and application of a method for determining benefits of tyre noise reduction efforts in terms of the number of people impacted.

Document GRRF/2015/27 proposes to modify the marking requirements to replace PSI with kilopascals (“kPa”). The intent is to harmonize the pressure indication and avoid confusion between UN Regulation No. 54 and US FMVSS 119 or FMVSS 139. This proposal would allow for the use of kPa markings in place of PSI prior to the 1 January 2018 transition date.

Presentation supporting documents GRRF/2015/25, /29, and /32 proposing to:
a) Align definitions and content of UN tyre regulations;
b) Include a definition of “manufacturer” extracted from the resolution “R.E.3”;
c) Adopt a common definition and use of the terms “Manufacturer’s name”, “Brand name”, “Trademark”, “Trade description” and “Commercial name” and their links; and
d) Add information in the certificate to enable approval authorities to more easily understand the products the certificate addresses.

Table of potential areas for future GRB work prepared during an informal meeting held in Paris during 2-3 July 2015.

At the GRB meeting in January 2015 the Netherlands introduced a justification and proposal for future tyre noise limits (document GRB-61-03). During the discussion, it was suggested to investigate whether difference in performance existed between Original Equipment Manufacturer (OEM) tyres and replacement tyres, noting that the transitional provisions in EC/661/2009 take into account the earlier introduction of noise limits of OEM tyres mounted on new vehicle types. Therefore, the Dutch Ministry of Infrastructure and the Environment asked M+P to investigate the statistics of tyre noise label values in OEM tyres in more detail.

Proposal to increase the stringency of tyre noise limits from 1 November 2020.

Presentation in support of the proposal to increase the stringency of tyre noise limits from 1 November 2020.

ETRTO comments raising concerns over the validity of the Dutch dataset used to support the proposal for higher tyre-noise stringency.

Presentation on Japanese vehicle noise activities, including alignment with UN Regulations and subsequent abolition of certain current Japanese regulatory requirements (e.g. cruising noise, etc.).

Presentation of Japan’s plans for phasing in UN R41, UN R51 (Phase 2, but not Phase 3 limits), and UN R117 requirements.

Presentation on low-noise pavements and the PERSUADE (PoroElastic Road
SUrface for Avoiding Damage to the Environment) project.

Proposal to modify the marking requirements to replace PSI with kilopascals (“kPa”). The intent is to harmonize the pressure indication and avoid confusion between UN Regulation No. 54 and US FMVSS 119 or FMVSS 139.

Proposal to:
a) Align definitions and content with the other tyre regulations (UN Regulations Nos. 30, 54, 75 etc.);
b) Include a definition of “manufacturer” extracted from the resolution “R.E.3”;
c) Adopt a common definition and use of the terms “Manufacturer’s name”, “Brand name”, “Trademark”, “Trade description” and “Commercial name” and their links; and
d) Add information in the certificate to enable approval authorities to more easily understand the products the certificate addresses.

Proposal to prepare an amendment to UN Global Technical Regulation (GTR) No. 16 on tyres in order to introduce provisions concerning wet grip performance, rolling resistance, and qualification of tyres for use under severe snow conditions in accordance with the same provisions introduced recently into UN Regulation No. 117.

Proposal for a new time measurement accuracy for instrumentation involved in the rolling resistance method (Annex 6 of the UN Regulation) and to restore transitional provisions incorrectly deleted by Supplement 6 to the 02 series of amendments. The proposal also updates the test-track references to the recently published ISO 10844:2014.

Reference prepared by the WP.29 secretariat

The overall aim of the study is to propose policy options concerning the use of tyres for improvement of traffic safety. Centrally to this, is the idea that end users need to make the correct assessment in relation to the tyre condition in order to achieve a level of safety as high as possible. Within this context, the tyre condition is considered in relation to technical elements (tyre inflation pressure, tyre tread depth, tyre damage, tyre age, and meteorological influences) and one information element (driver awareness). The study addresses the topics of tyre usage and the impact on road safety (which are the potential safety improvements related to tyre usage from a technical perspective) and how can road users be supported to use tyres that have a better safety performance by policy options.

This proposal is an alternative to that represented in document GRRF/2015/9 and GRRF-79-19.

Proposal for an alternative to the proposal (document GRRF/2015/9) to restore transitional provisions incorrectly deleted by Supplement 6 to the 02 series of amendments.

Proposal to update the test-track references to the recently published ISO 10844:2014.

Pursuant to the introduction of the deceleration method for measuring tire rolling resistance using the dω/dt approach (“Deceleration Calculator”) proposed by NAMI and accepted by GRB, UTAC (France) provides information on the results of tests conducted to confirm repeatability and reproducibility of the new method using different machines.

Proposal from Japan, pursuant to the discussion of document GRB/2014/8 during the previous GRB session, to correct perceived inconsistencies in time measurement accuracy in annex 6.

Presentation of the benefits envisioned by the Netherlands from the use of AAA tyres.