Proposal to correct drafting errors within the 06 and 07 series of amendments.

Proposal to permit the use of hydrogen (H2) as fuel for emissions type approval of heavy-duty vehicles.

Proposal to align the Regulation with the latest regional requirements.

Proposal to align the Regulation with the latest regional requirements.

Proposal to introduce new provisions to accommodate type-approval of hydrogen Type 1A dual fuel engines and vehicles, modifications to include Fourier Transform Infrared (FTIR) and Quantum Cascade Laser (QCL) instruments and new provisions to accommodate monitoring on-board fuel and/or energy consumption during PEMS testing.

Proposal to harmonise and consolidate the regional procedures and limits, update the provisions to align with Euro 7 requirements, including new particle number (PN10) provisions, a new SHED limit for evaporative emissions, updated On-board Fuel Consumption Monitoring provisions, new annexes with requirements relating to in-vehicle battery durability and a new test for range of Pure Electric Vehicles at low temperatures. An informal document amending this proposal is under development.

Proposal for a new series to align with Euro 7 requirements, including provisions on manipulation devices and manipulation strategies, anti-tampering, security and cyber security, and extended lifetime and In-Service Conformity requirements for in-vehicle battery durability. The Type 2 test has been removed from this new series. An informal document amending this proposal is under development.

Proposal to align the real-driving emissions provisions with the requirements of Euro 7 and to introduce a “levels” concept. An informal document amending this proposal is under development.

Proposal to remove the provisions relating to manipulation devices and manipulation strategies that are being moved to UN R154 and clarify that in-service conformity checks for electric range of pure electric vehicles at low temperatures are optional.

Proposal to introduce provisions relating to

• Manipulation Devices and Strategies that were previously in the 09 series of amendments to UN R83,
• the levels to which certain provisions apply,
• clarifications and corrections to the requirements for the laboratory test for pure electric range ratio at low temperature for Pure Electric Vehicles
• an update to allow the use in Levels 1A and 2 of actual tyre rolling resistance values to calculate the final road load coefficient for the individual vehicles, and
• align the Regulation with the current regional status and the current state-of-the-art.

Proposal to add abbreviations for Fourier Transform InfraRed (FTIR) and Quantum Cascade Laser mid-InfraRed detection (QCL-IR) analysers, amend the definition of ‘Type of analyser’ to reference ‘Instrument manufacturer’, insert a new definition of ‘Instrument manufacturer’, amend paragraph 4.1.1 to permit use of QCL-IR or FTIR analysers for gaseous components except THC, add detailed specifications for FTIR and QCL-IR analysers including installation requirements and assessment procedures according to CEN EN 17507:2021, amend paragraph 4.3.5 to add interference check procedures for FTIR and QCL-IR analysers, and insert new Annexes 13 and 14 establishing a protocol for analyser assessment and a model certificate of acceptable analyser assessment.

Presentation on EU plans for updating the regulatory regime for motorcycles and related vehicles, including obligatory fitment of advanced brake systems, abandonment of the 74 kW power restriction, anti-tampering measures, and mandatory “automatic headlamp on” feature.

Proposal to include wet grip adhesion provisions for C2 and C3 tyre categories.

Editorial corrections to the proposal prepared by the European Commission (EC), France and European Tyre and Rim Technical Organisation (ETRTO) to introduce wet grip provisions and testing procedures for tyres of categories C2 and C3.

European Commission proposal for minimum wet grip limits on Class C3 tyres. The EC notes that the wet grip (G) index is intended as a precautionary measure that would set a minimum level already satisfied by products currently on the market. In anticipation of improvements in new tires, the EC proposes to add a notation “Wet grip index (G) ≥ 0.80 may be considered for new types of tyres 96 months after the entry into force date of Supplement 5 to the 02 series of amendments, based on robust field data and cost-effectiveness analysis.”

Report of the special meeting held in Paris on 21 November 2013 to discuss wet grip values for Class C2 and C3 tyres.

Proposal to add classifications covering agricultural trailers and towed agricultural machinery in the Consolidated Resolution on the Construction of Vehicles (R.E.3).

Proposal to clarify the provision for permissible deactivation of ABS systems under the proposal to clarify the use of Combined Braking Systems (CBS) under UN R78.

Proposal to clarify the provision for permissible deactivation of ABS systems under the proposal to clarify the use of Combined Braking Systems (CBS) under GTR No. 3.

Proposal to include three-wheeled category l vehicles within the scope of ABS testing under UN R78. This would align the scope with EU Directive 93/14/EEC.

Presently, it is not fully clear whether an anti-lock braking system (ABS) switch-off or altering mode is permitted on L-category vehicles, whereas it is clearly not allowed on other vehicle categories. This proposal is aimed at ensuring a consistent approach for all motor-vehicles equipped with anti-lock braking systems, including specific exemptions for certain off-road vehicles as incorporated in UN Regulation No. 13.

Presently, it is not fully clear whether an anti-lock braking system (ABS) switch-off or altering mode is permitted on L-category vehicles, whereas it is clearly not allowed on other vehicle categories. This proposal is aimed at ensuring a consistent approach for all motor-vehicles equipped with anti-lock braking systems, including specific exemptions for certain off-road vehicles as incorporated in UN Regulation No. 13.

EC responses to IMMA comments (document GRRF-80-13) on the proposa to align the text with the provisions for anti-lock braking systems (ABS) used in other regulations (document GRRF/2015/41).

EC responses to IMMA comments (document GRRF-80-13) on the proposal to align the text with the provisions for anti-lock braking systems (ABS) used in other regulations (document GRRF/2015/40).

Proposal to ensure that coupling balls do not block rear lighting and/or registration plates. In line with the EU General Safety Rule, Annex IV specification for application of UN R55, couplings that might block lighting or plates must be removable, repositionable, and unlockable in order to make it easier for users to remove them or reposition them when not in use (e.g., towing a trailer.) Coupling balls that are so designed as to be unable to block lighting or plates may still incorporate locks and/or require tools to remove or reposition.

Proposal for a new UN Regulation based upon the provisions for tyre-pressure monitoring systems (TPMS) extracted from UN R64 in order to facilitate the application of UN R64 within the International Whole Vehicle Type Approval system. This proposal also seeks to take into account efforts to update US FMVSS requirements for TPMS.

Revised version of the proposal, updated by the GRRF secretariat to take into account comments received during the February 2016 GRRF session, for a revised new UN Regulation based on the provisions for tyre-pressure monitoring systems (TPMS) extracted from UN R64 in order to facilitate the application of UN R64 within the International Whole Vehicle Type Approval system. This proposal also seeks to take into account efforts to update US FMVSS requirements for TPMS.

Revised proposal to align UN R78 with the provisions for anti-lock braking systems used in other regulations, including specific exemptions for certain off-road vehicles as incorporated in UN Regulation No. 13. The proposal clarifies the limits on the use of any temporary ABS deactivation switch and prohibition against permanent disabling of ABS if fitted on a motorcycle. The European Commission prepared this revised proposal in cooperation with Germany, the Netherlands and IMMA. Given the importance of the changes, the proposal includes transitional provisions.

Revised proposal to align UN R78 with the provisions for anti-lock braking systems used in other regulations, including specific exemptions for certain off-road vehicles as incorporated in UN Regulation No. 13. The proposal clarifies the limits on the use of any temporary ABS deactivation switch and prohibition against permanent disabling of ABS if fitted on a motorcycle. This revised proposal takes into account comments received during the February 2016 GRRF session.

Information and status report on the European Commission Cooperative ITS Deployment Platform established in 2014 to define the European framework for connected vehicles and on the Commission Decision C(2015) 6943 of 19 October 2015 establishing a High Level Group on the Competitiveness and Sustainable Growth of the Automotive Industry in the European Union (GEAR 2030) with particular attention to the evolution of connected and autonomous vehicles.

Revised proposal to ensure that coupling balls do not block rear lighting and/or registration plates. In line with the EU General Safety Rule, Annex IV specification for application of UN R55, couplings that might block lighting or plates must be removable, repositionable, and unlockable in order to make it easier for users to remove them or reposition them when not in use (e.g., towing a trailer.) Coupling balls that are so designed as to be unable to block lighting or plates may still incorporate locks and/or require tools to remove or reposition.

Proposal to amend the annex on complex electronic systems, in particular, to require auditing of the methodologies used to ensure system safety at both concept and system level. Concept level specifically requires consideration of interaction with other vehicle systems.

Proposal of updated objectives and timelines for the work of the ACSF informal group.

European Commission note on the publication of a recent study carried out by the environmental advocacy group Transport & Environment on the performance of indirect TPMS.

Proposal to amend the transitional provisions of the formal proposal to update UN R106 (GRRF/2017/9).