Proposal to clarify the requirements for electric heaters by limiting possibilities for exemptions applicable to interior heating systems supplied by several electrical elements.

Proposal to strike “sur un montage rigide” from paragraph 6 (Essai effectué sur un montage rigide/sur un véhicule/sur des parties représentatives du châssis d’un véhicule²) in order to align the French version with the English and Russian versions of the text.

Proposal to delete the reference to abrasion requirements in Annex 3, paragraph 6.4.1.3. since abrasion resistance is not relevant in the assessment of resistance to weathering.

Proposal to introduce a generic drawing to improve interpretation of the regulation, especially with regard to contactable parts (sphere protocol).

Proposal to improve the communication document. The current wording of item 2 in Annex 1 is redundant with item 3 and not aligned with similar texts (UN R58 or R73). The key point of item 2 is to identify the type of device or component approved.

Proposal to introduce electromagnetic specifications for the approval of an electronic device, such as a transponder — even without the traditional functionality of a mechanical key — under UN R62 via reference to UN R10 on electromagnetic compatibility (as is the case under UN R116).

Proposal to introduce a generic drawing to improve interpretation of the regulation, especially with regard to contactable parts (sphere protocol). The proposal aims to clarify how to deal with potentially “exempted” parts and which requirements apply to which part of the windscreen wiper. Given the implications for approvals, the proposal is presented as a new series of amendments with transitional provisions starting 24 months after entry into force.

Proposal to extend specifications for defrosting/demisting conductors outside zone A where applicable.

UN R39 allows for odometer units in miles. This proposal would clarify requirements for systems that can switch the odometer units between kilometers and miles to ensure that only one unit of measurement for total distance is used at a time.

Proposal to clarify the classification of panes in “safety-glass faced with plastics material” and “glass-plastics”

Proposal to solve a potential inconsistency regarding abrasion test requirements for flexible plastics other than windscreen.

Proposal to amend UN R18, UN R39, UN R46, UN R55, UN R58, UN R67, UN R73, UN R93, UN R97, UN R102, UN R105, UN R107, UN R110, UN R116, UN R121, UN R122, UN R125, UN R144, UN R147, UN R151, UN R158, UN R159, UN R160, UN R161, UN R162, UN R163, UN R166, UN R169, UN R176, UN R181, UN R182 and UN R183:

• Add new paragraphs defining Software Identification Number by reference to Consolidated Resolution on the Construction of Vehicles (R.E.3) Annex 7, para. 2,
• amend paragraphs concerning production discontinuation to clarify that production is not considered definitively discontinued if vehicle manufacturers intend to obtain subsequent extensions of approval for software updates of vehicles already registered in the market,
• add new paragraphs requiring manufacturers to provide Technical Services with information on all hardware and software having an influence on performance,
• add new paragraphs allowing vehicle manufacturers to apply for new vehicle approvals to differentiate software versions for vehicles already registered in the market from those for new vehicles,
• add new paragraphs to approval forms requesting additional information regarding software identification and software updates, including whether Software Identification Number is held on the vehicle and relevant parameters for identification of vehicles that can be updated with the represented software.

According to the European Community’s participation in the revised 1958 Agreement, the UNECE Regulations have become alternatives to the technical annexes of the corresponding EU Directives. This proposed amendment is aimed at reinforcing consistency between the UNECE Regulations and the EU Directives.

Draft of the new child restraint systems regulation following the 49th session of the Working Party on Passive Safety (GRSP) and of the 29th meeting of the informal group on child restraints systems (CRS) held in December 2011.

Submission from France and Germany further explaining why belt guide devices such as that cited by CLEPA in document GRSP-50-09 cannot be approved as a child restraint system. Document GRSP-50-28 provided results of the Latin NCAP crash tests.

Submission from France to introduce provisions that would prevent unintentional disengagement of ISOFIX child restraint systems from their anchor points.

Pursuant to the Forum project to clarify definitions and avoid conflicting use of acronyms, France has submitted this list of acronyms and abbreviations used in UN R44 on child restraint systems.

Helmets equipped with unapproved integrated sunscreens that modify luminous transmittance and replacement helmet visors that do not meet the luminous transmittance criteria of UN R22 have appeared on the market. France intends to submit a proposal to define sunscreens and permit tinted visors.

Downloadable Powerpoint presentation on the status of the new draft regulation.

Proposal from France to prevent users or other vehicle occupants from unintentionally disengaging ISOFIX child restraint systems from their anchor points.

Revised proposal from France to prevent users or other vehicle occupants from unintentionally disengaging ISOFIX child restraint systems from their anchor points.

Amendments to the proposal from the France on behalf of the Technical Services Group (TSG) on UN Regulation No. 44 which aims to clarify the lap strap interaction with the dummy and its assessment as well as improving the overturning test procedure in light of recent findings.

Revised amendments to the proposal from the France on behalf of the Technical Services Group (TSG) on UN Regulation No. 44 which aims to clarify the lap strap interaction with the dummy and its assessment as well as improving the overturning test procedure in light of recent findings.

Presentation on the proposal to amend UN R44 in order to clarify seat belt lap-strap interaction with the child dummy in the testing of child restraint systems.

Proposal to include a paragraph presenting French cost-benefit data for improved side impact protection in light vehicles. France does not believe PSI is beneficial to commercial vehicles.

Working draft with markups of the next phase in the development of the enhanced child restraint systems regulation.

Working draft of the proposed amendments to introduce provisions for non-integral CRS (“Universal Booster” or “Specific to vehicle Booster”), incorporating all the changes agreed during the 54th (December 2013) GRSP session.

Proposal to require that a horn or other acoustic signalling system can be activated from within a parked vehicle when in the fully locked mode and to set the transition period through 1 September 2016 for meeting the new requirement.

Proposal as revised during the 55th GRSP session (superseding document GRSP/2014/06) incorporating changes to UN R94 in light of the development of the new regulation concerning protection in frontal collisions with focus on the restraint system, especially to improve the protection of older occupants.

Presentation on the promising results of research into the use of shield systems to secure children in child seats.

Revised amendment to introduce all the modifications needed in UN Regulation No. 129 (Enhanced Child Restraint System (ECRS)) that were suggested by the experts of the informal working group on Child Restraint Systems (IWG CRS) to extend the scope of this Regulation to Non-Integral child restraint systems (“Universal Booster” or “Specific to vehicle Booster”) (Phase 2 of the UN Regulation).

Revised amendment, including track changes, to introduce all the modifications needed in UN Regulation No. 129 (Enhanced Child Restraint System (ECRS)) that were suggested by the experts of the informal working group on Child Restraint Systems (IWG CRS) to extend the scope of this Regulation to Non-Integral child restraint systems (“Universal Booster” or “Specific to vehicle Booster”) (Phase 2 of the UN Regulation).

Report on the phase 2 development (regarding universal booster seats and cushions) of UN Regulation No. 129.

Thorax compression criterion (ThCC) under the draft new regulation on frontal impact protection and occupant restraint systems.

Revised version of the proposal (formal document GRSP/2015/9 ) to extend the scope of UN Regulation No. 129 to include non-Integral child restraint systems (“Universal Booster” or “Specific to vehicle Booster”). This version includes all corrections to the text made by the Informal Working Group on Child Restraint Systems through it 6 May 2015 session.

Revised amendment, including track changes, to introduce all the modifications needed in UN Regulation No. 129 (Enhanced Child Restraint System (ECRS)) that were suggested by the experts of the informal working group on Child Restraint Systems (IWG CRS) to extend the scope of this Regulation to Non-Integral child restraint systems (“Universal Booster” or “Specific to vehicle Booster”) (Phase 2 of the UN Regulation).

Further refinements to the formal proposal to amend UN R129 with regard to non-integral CRS. This informal document effectively updates the formal proposal in GRSP/2015/24.

Updated proposal from the CRS informal group to introduce phase 2 amendments related to the booster-seat CRS category (booster seat with backrest) into UN R129. This informal document effectively supersedes the formal proposal in GRSP/2015/31.

Proposal to introduce provisions for seat-belt reminders for all vehicle seating positions pursuant to the outcome of the Task Force on Seat-belt Reminders discussions.

Consolidated version of UN R129 including the proposals for the 02 series of amendments (WP29/2016/107), Supplement 1 to the 02 series of amendments (GRSP/2016/19), and Supplement 2 to the 02 series of amendments (GRSP/2016/22). The 02 series concerns the “phase 2” amendments regarding the approval of booster-seat CRS category (booster seat with backrest). Supplement 1 updates the toxicity and flammability of materials provisions pursuant to Supplement 1 to the 01 series of amendments. Supplement 2 proposes editorial improvements and corrections to the original text.

Proposal to clarify and make editorial corrections to the text of the 02 series of amendments to the UN Regulation No. 129. This proposal supersedes document GRSP/2016/23 and amends WP.29/2016/107 (02 series of amendments to the UN Regulation) and GRSP/2016/19 (Proposal for Supplement 1 to the 02 series of amendments to Regulation No. 129).

Proposal to clarify and make editorial corrections to the text of the 02 series of amendments to the UN Regulation No. 129. This proposal supersedes document GRSP/2016/22 and amends WP.29/2016/106 (02 series of amendments to the UN Regulation).

This informal doc amends the draft supplement presented in document GRSP/2016/24 in order to harmonize the mass tolerances of the ISO fixtures. The proposal deletes a reference to the center of gravity and geometrical centroid. The centroid would need more information before choosing tolerances needed for certification tests.

This informal doc amends the draft supplement presented in document GRSP/2016/21 in order to harmonize the mass tolerances of the ISO fixtures. The proposal deletes a reference to the center of gravity and geometrical centroid. The centroid would need more information before choosing tolerances needed for certification tests.