Working Document GRSG/2019/24

Download in .pdf format Download in .docx format

Document Title

UN R62: Proposal for a new 01 series of amendments

Reference Number

GRSG/2019/24

Origin

France

Document Date

18 July 2019

Document Posted

24 July 2019

Meeting Session(s)

GRSG | Session 117 | 8-11 Oct 2019 (Agenda item 10. | UN Regulation No. 62 (Anti-theft (mopeds/motorcycles)))

42. The expert from France introduced ECE/TRANS/WP.29/GRSG/2019/24 proposing requirements for electromagnetic compatibility for electromechanical and electronic devices to prevent unauthorized use.

43. GRSG adopted ECE/TRANS/WP.29/GRSG/2019/24 and requested the secretariat to remove square brackets in para.12 of the document and to add requirements for the approval mark and number, and to submit it to WP.29 and AC.1 as draft 01 series of amendments to UN Regulation No. 62 for consideration at their March 2020 sessions.

Summary

Proposal to introduce electromagnetic specifications for the approval of an electronic device, such as a transponder — even without the traditional functionality of a mechanical key — under UN R62 via reference to UN R10 on electromagnetic compatibility (as is the case under UN R116).

Regulations

UN Regulation No. 62 | Protection Against Unauthorized Use of Vehicles with Handlebars

Document Status

Superseded

Regulation:	UN Regulation No. 117 \| Tire Rolling Sound Emissions, Adhesion on Wet Surfaces, and Rolling Resistance
Document:	Revision 4 \| Amendment 2
Corresponds to:	02 series of amendments \| Supplement 10 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/54 Proposal to correct a type in Annex 7- Appendix 2, Part 2, Paragraph 5 where the snow group index should read “1.00”, not “100” as appeared erroneously in the adopted text correct the text where the word “tyres” was inadvertently omitted from Paragraph 2.1. align the provisions of UN R117 regarding approval numbers and markings with the provisions of Schedule 4 to the revised 1958 Agreement.

Regulation:	UN Regulation No. 129 \| Enhanced Child Restraint Systems
Document:	Revision 4 \| Amendment 2
Corresponds to:	03 series of amendments \| Supplement 2 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/40 Proposal to introduce new and modified labeling and to clarify packaging information to distinguish between forward-facing-only, rear-facing-only, and convertible CRS in order to reduce the risk of users misusing these enhanced CRS clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy specify the dimensions of the approval number update i-Size universal ISOFIX, Specific Vehicle ISOFIX, i-Size Booster seat and Specific Vehicle Booster seat numbering (omitted in WP29-2018-045) rearrange the dimensions mark for arrangements of the approval mark where used in combination with the module mark change the 145 cm stature of the Specific Vehicle Booster seat to 150 cm stature as this is the correct upper limit, and clarify that Conformity of Production assessments shall be conducted under the same requirements as those of the original approval or, if applicable, the extension of the approval.

Regulation:	UN Regulation No. 129 \| Enhanced Child Restraint Systems
Document:	Revision 3 \| Amendment 4
Corresponds to:	02 series of amendments \| Supplement 5 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/39 Proposal to introduce new and modified labeling and to clarify packaging information to distinguish between forward-facing-only, rear-facing-only, and convertible CRS in order to reduce the risk of users misusing these enhanced CRS clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy specify the dimensions of the approval number correct the term “Regulation No. 129-02” to “UN Regulation No. 129/02” change the 145 cm stature of the Specific Vehicle Booster seat to the 150 cm stature as this is the upper limit, and modify the approval markings for consistency between technical services and approval authorities and between the labels of products approved under the 02 and 03 series.

Regulation:	UN Regulation No. 129 \| Enhanced Child Restraint Systems
Document:	Revision 1 \| Amendment 7
Corresponds to:	01 series of amendments \| Supplement 6 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/38 Proposal to introduce new and modified labeling and to clarify packaging information to distinguish between forward-facing-only, rear-facing-only, and convertible CRS in order to reduce the risk of users misusing these enhanced CRS, and clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy.