Proposal to require seat-belt reminders for all seating positions, including rear positions, and to clarify the scope of the regulation.

Proposal to amend the toxicity and flammability declarations via references to EN71 (European safety standards), taking into account procedures of FMVSS 302.

Proposal from the CRS informal group to introduce phase 2 amendments regarding the approval of booster-seat CRS category (booster seat with backrest) into UN R129.

Proposal to amend the toxicity and flammability declarations via references to EN71 (European safety standards).

Proposal to amend the toxicity and flammability provisions. This proposal runs in parallel with the proposal for Supplement 5 to the 00 series of amendments (document GRSP/2016/5).

Proposal to transfer provisions for electrical safety of trolleybuses from UN Regulation No. 107 (M2 and M3 vehicles) to UN Regulation No. 100 (Electric Power Trained Vehicles). This proposal seeks to clarify the scope of the two Regulations with regard to the electrical safety of trolleybuses.

Proposal to clarify and improve the belt routing and positioning of the universal child restraint system seat fixture during testing.

Proposal to improve the translation into Russian of the text originally adopted in its English version and to correct a typographical error in the Russian text.

Proposal to improve the translation into Russian of the text originally adopted in its English version and to correct a typographical error in the Russian text.

Proposal to strip ISOFIX CRS provisions from UN R44 and to cease all new type approvals for CRS under UN R44 from November 2016 in deference to UN R129 on Enhanced CRS. Presently, all the Contracting Parties applying UN R44 also apply UN R129. Therefore, the proposal seeks to eliminate the possibility to seek new type approvals under either UN R44 or UN R129 by restricting ISOFIX CRS to UN R129.

Proposal to clarify the installation requirements for N₃ vehicles for seating positions other than the front positions.

Proposal to insert provisions for vehicles equipped with manual airbag deactivation devices, especially to ensure that vehicles meet performance requirements regardless of the airbag activation setting and to specific requirements for airbag status reminders and telltales.

Proposal to clarify the requirements for CRS utilizing the seat belt lap strap in order to ensure correct installation and testing and to avoid possibly dangerous misinterpretation to the test configuration.

Proposal to to clarify the provisions for dynamic testing of rear seat system, advanced restraint system approval and transitional provisions prepared by the European Association of Automotive Suppliers (CLEPA) in cooperation with France, Germany, Japan, the Netherlands and the International Organization of Motor Vehicle Manufacturers (OICA). This proposal supersedes GRSP/2015/18 and GRSP-58-35.

Hungary agrees with the proposed change to the airbag label, but recommends the addition of transitional provisions.

Updated proposal from Spain on behalf of the CRS Technical Services Group to align requirements for deceleration test devices with acceleration ones (making explicit that it is mandatory to match the corridor for each test) and to add dummy criteria and compliance with ISO 17025 to the information required in test reports.

Proposal from Spain on behalf of the CRS Technical Services Group to

• to align paragraph 6.6.3.1. with the 01 series of amendments,
• to align requirements in 7.1.3.1 to test methods in 8.1.2.4.,
• to add tolerances to better define the test method in paragraph 8.1.2.3.,
• to improve the specifications for the measurement of dimensions C and D in Annex 23,
• to align deceleration test requirements with acceleration test provisions (making explicit that it is mandatory to match the corridor for each test, and
• to define the initial acceleration value under paragraph 7.3. against which the maximum deviation restriction is to be applied.

Amendment to the proposals (GRSP/2016/3, GRSP/2016/5, and GRSP/2016/6) to amend the toxicity and flammability declarations via references to EN 71 (European safety standards), taking into account procedures of FMVSS 302. The amendments propose the burning rate values of FMVSS 302 (302.4 inches/102 mm per minute), to harmonize the three proposals with regard to EN standards references, and to incorporate the amendment 1 to EN 71-3 (A1:2014).

Proposal to change the burn-rate in documents GRSP/2016/3, GRSP/2016/5, and GRSP/2016/6 from [250 mm] to the equivalent of the FMVSS 302 specification, i.e., 100 mm.

Proposal to introduce provisions for seat-belt reminders for all vehicle seating positions pursuant to the outcome of the Task Force on Seat-belt Reminders discussions.

Updated proposal from the CRS informal group to introduce phase 2 amendments related to the booster-seat CRS category (booster seat with backrest) into UN R129. This document updates the proposal in document GRSP/2016/4.

UN R80, paragraph 7.4.4. specifies that passengers in side-facing seats “shall be safeguarded by a vehicle part (e.g. partition, wall or seat back of a forward-facing seat) forward of the foremost side-facing seat”. Germany has determined that the current text has been misinterpreted with regard to the intended requirement for a safety device that does not break and maintains its capability to retain a passenger’s body in the event of an accident. This proposal clarifies that such any such structure “shall retain its safeguard function during testing”.

Proposal to strip ISOFIX CRS provisions from UN R44 and to cease all new type approvals for ISOFIX integral CRS under UN R44 from [November 2016] in deference to UN R129 on Enhanced CRS.

Draft of a request for authorization to amend GTR 9 to include provisions for deployable safety systems of the outer surface of the vehicle. This proposal originates with the development of technologies such as active hood/bonnet mechanisms that improve pedestrian impact protection. The proposal anticipates submission of a formal amendment for the June 2018 WP.29 session.

Presentation concerning technical discussions, conclusions, and proposals for CRS bench seat cushion drop tests under UN R44 and UN R129.

NHTSA presentation on the agency’s experience and investigations concerning low-speed vehicles and three-wheeled motorcycles. This presentation broadly considers very light vehicles mainly intended for local (neighborhood), short-distance transportation.

Proposal to clarify the “Minimum requirements for safety-belts and Retractors” table in Annex 16.

Proposal drafted by OICA pursuant to cooperation among the EU, Consumers International, Governmental experts, Euro NCAP, OICA and CLEPA to restructure and simplify the consumer information requirements on the installation of ISOFIX child restraint systems under UN R16.

Draft 02 series of amendments to Regulation No. 129