Proposal as approved by the GRE to delete unnecessary markings for LED front fog lamps that have non-replaceable LED modules and to correct and clarify the requirements for colour measurement and ultraviolet (UV) testing of light emitting diode (LED) modules.

Request for authorization to develop an amendment to GTR No. 6 (and thus UN Regulation No. 43) to establish test procedures and performance requirements for panoramic sunroof glazing.

Proposal to introduce new halogen categories H18, H19 and H20, update IEC cap sheet references, and make some minor corrections to existing categories.

Proposal as approved by the GRE to introduce the possibility of interdependent lamps for dedicated motorcycle lamps. The proposal reflects recent amendments to Regulations Nos. 6 and 7 and meets the visibility angle requirements of Regulations Nos. 50 and 53. The concern is that the rear trunk lid commonly used for four-wheeled vehicles may be adapted for future scooter type motorcycles to secure the storage space for helmet, etc. Current lamp requirements impose design constraints that may hamper the proper development of such storage features.

Proposal to align UN R48 with UN R107 with regard to the automatic activation of hazard warning lights and with UN R19 with regard to the prohibition of the simultaneous use of front fog lamps and other lamps with which the fog lamps are reciprocally incorporated.

Proposal as approved by the GRE to introduce flashing side marker lamps for vehicles of categories M2, M3, N2, N3, O3 and O4 with the objective of improving the safety of vulnerable road users by informing them about the intended turns of buses and heavy goods vehicles and their trailers. This document also makes editorial corrections.

Proposal as approved by the GRE to introduce flashing side marker lamps for vehicles of categories M2, M3, N2, N3, O3 and O4 with the objective of improving the safety of vulnerable road users by informing them about the intended turns of buses and heavy goods vehicles and their trailers. This document also makes editorial corrections and aligns UN R48 with UN R19 with regard to the prohibition of the simultaneous use of front fog lamps and other lamps with which the fog lamps are reciprocally incorporated.

Proposal as approved by the GRE to amend the requirements for the mixture in the dirt test.

Proposal approved by the GRE to correct an error introduced into the regulation through Supplement 16.

Proposal to amend the test procedure for reversing lamps and maneuvering lamps equipped with light sources other than filament lamps. Currently, the lamps are required to meet photometric parameters after one minute and 30 minutes of operation. Under normal use, these lamps are operated for no more than six minutes at a time. This proposal would set the second measurement point at 10 minutes rather than 30 minutes. This change would also align the procedure with SAE standard J1889.1.

Proposal as approved by the GRE to replace the current variety of test mixtures used to simulate dirt during the testing of lamps with a single uniform mixture. In addition, the proposal would replace the term “beech wood” with the phrase “produced from beech wood” to improve clarity.

Consolidated proposal prepared by the AVLI informal working group to update and revise Regulation No. 86 as approved by the GRE.

Proposal as approved by the GRE to allow for the installation of interdependent lamps for L3 category vehicles. The amendment also reflects recent amendments to Regulation No. 48, Supplement 2 to its 06 series of amendments and further includes some editorial corrections of current Regulation No. 53 texts. The concern is that the rear trunk lid commonly used for four-wheeled vehicles may be adapted for future scooter type motorcycles to secure the storage space for helmet, etc. Current lamp requirements impose design constraints that may hamper the proper development of such storage features. Please note that the title of this document has been corrected to Supplement 17. Supplement 15 was adopted under Amendment 1 to Revision 3 of UN R53.

Certain UN Regulations contain provisions to allow for local divergence from the uniform requirements they present. The draft Revision 3 of the 1958 Agreement refers categorically to these “special provisions”. Since such provisions work against the principles of harmonization and mutual recognition of approvals, OICA proposes to clarify that the 1958 Agreement recognizes such provisions as existed prior to Revision 3 without institutionalizing the recourse to such deviations as a regular part of the UN regulatory process.

Proposed text, updated to reflect discussions at the June 2014 WP.29 session, to revise and update the 1958 Agreement pursuant to the project to establish an international whole vehicle type approval system.

Final report on the development of Amendment 2 to the GTR on motorcycle braking submitted for consideration and approval by the World Forum.

Proposal submitted by the GRRF to clarify provisions concerning the use of Combined Braking Systems (CBS) and for a series of amendments to clarify a variety of requirements, notably concerning test surface requirements, ABS cycling, and peak braking coefficient measurements. The proposal clarifies the terms “inoperative” and “disconnected”, introduces the “K-method”.

Proposal as approved by the GRE to introduce new categories LR3A, LR3B, LR4A, LR4B and correct one value in the ultraviolet (UV) table.

Proposal as approved by the GRE to simplify measuring the objective luminous flux of light emitting diode (LED) module(s), correct the ultraviolet (UV) table, and to replace the current variety of test mixtures used to simulate dirt during the testing of lamps with a single uniform mixture. In addition, the proposal would replace the term “beech wood” with the phrase “produced from beech wood” to improve clarity.

According to Regulation No. 119, cornering lamps that are equipped with light sources other than filament lamps, are required to meet the relevant photometric requirements after one minute and after 30 minutes of operation. However, under normal traffic conditions, these lamps are operated for no more than 6 minutes. This proposal as approved by the GRE would would require the second test after 10 minutes instead of the current 30 minutes, in accordance with standard SAE J1889.

Proposal as approved by the GRE to replace the current variety of test mixtures used to simulate dirt during the testing of lamps with a single uniform mixture. In addition, the proposal would replace the term “beech wood” with the phrase “produced from beech wood” to improve clarity. The proposal would also simplify the measurement of the objective luminous flux of light emitting diode (LED) module(s) and correct the ultraviolet (UV) table in the regulation.

Proposal as approved by the GRE to simplify measuring the objective luminous flux of light emitting diode (LED) module(s) and to replace the current variety of test mixtures used to simulate dirt during the testing of lamps with a single uniform mixture. In addition, the proposal would replace the term “beech wood” with the phrase “produced from beech wood” to improve clarity.

Proposal as approved by the GRE to introduce a new light-source category: D8R.

Correction of errors in certain of the Cap sheet references in the original proposal.

Correction of the title to “Supplement 17” from the erroneous “Supplement 15”.

In 2014, the European Union revised its legislation on periodic inspections to ensure the roadworthiness of motor vehicles (Directive 2014/45/EU). The WP.29 secretariat has prepared this document to encourage consideration of ways to align the 1997 Agreement on vehicle technical inspections with the EU legislation towards facilitating broader participation among nations in the agreement.

Voting form for consideration of amendment 2 to GTR 3 on motorcycle brakes and amendment 3 to GTR 4 on heavy-duty vehicle emissions test procedures.

Reference prepared by the WP.29 secretariat

Status report on the work to harmonize definitions and terms.

Final version of the informal group working draft subject to resolution of open issues (in square brackets) where guidance from the World Forum/WP.29 has been requested.

Certain UN Regulations contain provisions to allow for local divergence from the uniform requirements they present. The draft Revision 3 of the 1958 Agreement refers categorically to these “special provisions”. Since such provisions work against the principles of harmonization and mutual recognition of approvals, the IWVTA informal group proposes to clarify that the 1958 Agreement recognizes such provisions as existed prior to Revision 3 without institutionalizing the recourse to such deviations as a regular part of the UN regulatory process.

The 03 series of amendment introduced a new Test C into UN Regulation No. 29. This proposal adds specifications for the test rig in the case where a pendulum impactor is used (as is already prescribed for Tests A and B). To improve the repeatability of the test, the submission further proposes to place the cab on a horizontal surface and to fix the pendulum with a required angle of 20° of impact against the cab to be tested. This proposal also adds language to require that the vehicle cab remain attached to the vehicle frame by at least three mounting points following the pendulum test.

Proposal to define the moment of inertia in the luggage-impact test as “0.3 ± 0.05 kgm2 (around all 3 principal axis of inertia of the luggage blocks)”. UN R17 presently lacks such a definition, resulting in variations in trajectory and behavior of the luggage cubes before and after impact. This proposal would also correct a reference to UN R25 to refer to the 04 series of amendments rather than to the 03 series of amendments.

Proposal to introduce provisions for ISOFIX in convertible cars, to exempt vehicles with one seating position per row from the ISOFIX provisions of UN R14 and to correct an editorial error in Supplement 4 to the 07 series of the regulation, as adopted by the Working Party on Passive Safety (GRSP) at its 54th session. This proposal supersedes the earlier proposal submitted to WP.29 (document WP.29/2014/34) which was returned by WP.29 to GRSP for further consideration.

The purpose of this proposal is to include the necessary transitional provisions to Supplement 4 to the 01 series of amendments to Regulation No. 101, in order to ensure consistency between the reference fuels prescribed in Regulation No. 83 (Emissions of M1 and N1 vehicles) and those prescribed in this Regulation.

Proposal to update the on-board diagnostics (OBD) requirements, to delete the definition of “vehicles designed to fulfil specific social needs” in line with the Euro 6 stages of European Union Regulation (EC) No. 715/2007 and implementation Regulation (EC) No. 692/2008, and to clarify the wording of transitional provisions and align them with the General Guidelines for UN Regulatory Procedures and Transitional Provisions in UN Regulations (ECE/TRANS/WP.29/1044/Rev.1). In addition, the proposed wording would allow Contracting Parties not to accept UN type-approvals if the requirements specified in the 07 series of amendments are not met.

Proposal to update the on-board diagnostics (OBD) requirements of UN R83 in line with technical progress and to update the reference fuels in the 06 series of amendments in line with changes introduced in the 07 series of amendments to UN R83.

Proposal to adapt certain requirements to the current state of technology and to transpose the latest decisions of the European Union (EU) regarding on-board diagnostics (OBD) threshold limits.

Proposal to limit the scope of UN R135 to M1 vehicles under 3.5 t maximum vehicle mass and to certain N1 vehicles based on geometric measurements. The proposal would exclude the small number of M1 vehicles weighing in excess of 3.5t that are based on N2, N3, M2, or M3 platforms.

Proposal to include “MFP” in the labeling requirement for hydrogen containers. MFP refers to the maximum allowable container pressure under normal use.

Editorial improvements to the text and introduction of provisions allowing for the separation of connectors (including the vehicle inlet) without the use of tools under prescribed conditions.

Editorial improvements to the text and introduction of provisions allowing for the separation of connectors (including the vehicle inlet) without the use of tools under prescribed conditions specified under paragraph 5.1.1. This paragraph describes the general requirements for the protection of all high voltage parts, including the obligation that such protection against live parts cannot be opened without the use of tools. If connectors can be opened without use of tools or if they do not satisfy the IPXXD/IPXXB protection limits, the provisions of 5.1.1.3 have to be met.

Proposal to delete Appendix 3 (examination of the mobile impact barrier) to Annex 5 of UN R95. Appendix 3 was rendered redundant by the 02 series of amendments to the regulation (which introduced the EEVC mobile deformable barrier).

Proposal to amend the scope and clarify the transitional provisions to avoid misinterpretations for the installation of side-facing seats in category M3 vehicles. The proposal exempts vehicles exceeding 10 tonnes from the prohibition on side-facing seat provided the seat meet conditions specified in the 03 series of amendments to the Regulation.

Draft proposal for the regulation to establish an international whole vehicle type approval. This proposal includes tentative text in brackets that is still awaiting final agreement among the Contracting Parties to the 1958 Agreement.

Proposal to transpose requirements for new snow tyres (under UN R117) into UN R109 in order of avoid the exclusion of retreaded tyres from such applications/markets.

Proposal to permit the “LT” marking as a prefix or suffix to align the requirements with the current practice for C2 tyres with metric size designation. The proposed text for a prefix is in line with the latest draft of the gtr on tyres. The proposed text for a suffix is necessary for tyres designed to Japan Automobile Tyre Manufacturers Association (JATMA) standards. The proposal would add new tyres for light commercial vehicles (high flotation tyres) in Annex 5 of UN Regulation No. 54.

Proposal for a new time measurement accuracy for instrumentation involved in the rolling resistance method (Annex 6 of the UN Regulation) and to restore transitional provisions incorrectly deleted by Supplement 6 to the 02 series of amendments. The proposal also updates the test-track references to the recently published ISO 10844:2014.

Proposal to update the reference to the latest version of ISO 10844 and to introduce transitional provisions for the shift of the test track requirements from ISO 10844: 1994 to ISO 10844: 2014.

Further refinements to the 02 series of amendments prepared by the Informal Working Group on UN Regulations Nos. 51 and 59. This submission proposes to clarify the amended text of document WP.29/2015/4 which was adopted during the March 2015 WP.29 session.

This proposal further refines and clarifies the 03 series of amendments to UN R51 from Informal Working Group on UN Regulations Nos. 51 and 59. The 03 series was proposed in document GRB/2014/5 which was amended and then adopted by the Working Party on Noise during its 60th session. The proposal includes special provisional limits for Chinese micro-vehicles which are being reviewed by Japan.

Proposal to introduce a calculated engine speed (in addition to measured engine speed) for MT vehicles and for continuously variable transmission (CVT)/automatic transmission (AT) with locked gear mechanism into UN Regulation No. 41 for the tests in Annex 3 and Annex 7 (Additional sound emission provisions – ASEP)

Proposal to allow vehicles to be run at idle during the test procedures and to change the minimum sound level requirement for vehicles of category M and N and motorcycles of a power greater than 7 kW from 93 dB to 87 dB.

Proposal to update the reference to the latest version of the ISO 10844 and to introduce transitional provisions for the shift of the test track requirements from ISO 10844: 1994 to ISO 10844: 2014.

The Compendium of Candidates maintains a list of national and/or regional regulations proposed by Contracting Parties as possible bases for the development of Global Technical Regulations. Listing No. 9 concerns the US Federal Motor Vehicle Safety Standards (FMVSS) No. 213: “Child Restraint System” and No. 225: “Child Restraint Anchorage Systems”.

The Compendium of Candidates maintains a list of national and/or regional regulations proposed by Contracting Parties as possible bases for Global Technical Regulations. Listing No. 7 concerns the US Federal Motor Vehicle Safety Standard (FMVSS) No. 139: “New Pneumatic Radial Tires for Light Vehicles”.

The Compendium of Candidates maintains a list of national and/or regional regulations proposed by Contracting Parties as possible bases for the development of Global Technical Regulations. Listing No. 6 concern the US Federal Motor Vehicle Safety Standard (FMVSS) No. 135: “Passenger Car Braking Systems”.

The Compendium of Candidates maintains a list of national and/or regional regulations proposed by Contracting Parties as possible bases for the development of Global Technical Regulations. Listing No. 5 concerns the US Federal Motor Vehicle Safety Standard (FMVSS) No. 108: “Lamps, Reflective devices and Associated Equipment”.

The Compendium of Candidates maintains a list of national and/or regional regulations proposed by Contracting Parties as possible bases for the development of Global Technical Regulations. Listing No. 3 from the United States concerns the “Control of Emissions of Air Pollution from Non-road Diesel Engines and Fuel”.

The Compendium of Candidates maintains a list of national and/or regional regulations proposed by Contracting Parties as possible bases for Global Technical Regulations. Listing No. 2 from the United States concerns “Tier 2 Motor Vehicle Emissions Standards and Gasoline Sulfur Control Requirements”.

The Compendium of Candidates maintains a list of national and regional regulations proposed by Contracting Parties as possible bases for the development of Global Technical Regulations. Listing No. 1 from the United States concerns highway diesel fuel sulfur control and heavy-duty engines.

Proposal to limit the scope of UN R135 to M1 vehicles under 3.5 t maximum vehicle mass and to certain N1 vehicles based on geometric measurements. The proposal would exclude the small number of M1 vehicles weighing in excess of 3.5t that are based on N2, N3, M2, or M3 platforms. [Because the transitional provisions of the 01 series of amendments to UN R135 stipulate an effective date of 1 September 2016, this supplement to the 01 series will remain pending until after that date. Although adopted, the supplement cannot become enter into force prior to the effective date of the regulation it modifies.]

Proposal to prepare an amendment to UN Global Technical Regulation (GTR) No. 16 on tyres in order to introduce provisions concerning wet grip performance, rolling resistance, and qualification of tyres for use under severe snow conditions in accordance with the same provisions introduced recently into UN Regulation No. 117.

Proposed text for the new UN Regulation on the safety of electric motorcycles and related vehicles.

Template for following the vote to include the proposed national regulations in the compendium of regulations for consideration as part of any related future GTR development work.

Information on WP.29 plans to introduce an automated system that would generate consolidated versions of UN Regulations and GTR, including all amendments and corrections, at the time each enters info force. This system may also allow for the generation of earlier versions of each regulation according to the past date selected.

Table on the status of the proposals adopted at the November 2014 WP.29 session. These proposals, with one exception, became binding on 15 June 2015 following the six-month statutory waiting period.

Proposal for a “joint task force” involving all stakeholders to consider the impact of automated/autonomous driving on the regulation of vehicles, traffic, and road infrastructure in order to develop coordinated and mutually acceptable responses towards improving overall road safety.

Proposal to clarify that type approval under the International Whole Vehicle Type Approval System does not invalidate the obligation to meet additional regional or national requirements that may apply.

On 7 October 2015, the UNECE will hold its annual flagship ITS workshop in conjunction with the 22nd ITS World Congress in Bordeaux. The subject of the conference will be “ITS for Sustainable Mobility and the Mitigation of Climate
Change”.

Updated draft set of guidelines prepared by the WP.29 secretariat concerning the submission and adoption of modifications to UN Regulations, especially taking into consideration the pending Revision 3 to the 1958 Agreement which envisions, among other things, the acceptance to multiple “versions” of each regulation. This document covers: amendments resulting from draft Revision 3; publication of new series of amendments; long transitional provisions; versions of UN Regulations; use of cross-references; amendment commencement dates; consolidation of amendments to once per year; and use of “compilations” of modifications.

The purpose of this paper is to provide a framework through which the delegates to the World Forum for the Harmonization of Vehicle Regulations (WP.29) and other interested stakeholders can examine the experience with the 1998 Global Agreement and agree on ideas and processes for improvement in its implementation.

This is a proposal to introduce a new HID category (D9S) into Regulation No. 99 with dual-level operation, i.e. with two defined wattage values and corresponding luminous flux values. This new category (D9S) is the first light source in R99 that has two defined power levels. When this dual-level light source is used in a headlamp which is being approved according to Regulation No. 98, the testing and approval provisions must be clearly defined in this Regulation to avoid misinterpretation. Therefore, it is proposed to amend the relevant paragraphs of Regulation No. 98 to take into account the multi-level aspects of D9S and possible future multi-level light sources in Regulation No. 99.

Proposal to correct the omission of front position lamp (color: white) from paragraph 5.13. specifying the color of lights referred to in the regulation in the previous Supplement 8.

On the request of Office of Legal Affairs, this document was issued as Supplement 9 to the 01 series of amendments to Regulation No. 74 replacing the proposal for a Corrigendum1 to Supplement 8 to the 01 series as approved by WP.29. at its 167th session.

Proposal from GRPE to provide recommendations for the minimum quality of market fuels (i.e. gasoline and diesel) that should be introduced concurrently with the corresponding emissions standards. They complement the motor vehicle and NRMM pollutant emission standards that a country or a region may be considering to introduce.

Proposal to introduce mandatory requirements for fire suppression systems for Class III buses and coaches (and optional requirements for other classes) activated upon detection of fire in the engine and/or heater compartment. This proposal also extends the treatment of rear-view mirrors to any camera-monitor systems used in place of rear-view mirrors.

Proposal to regulate the discharge direction of pressure relief devices on CNG containers.

Proposal to correct the numbering of chapter 18 following the introduction of provisions for automatic valves.

Proposal to ensure that all devices for indirect vision, including exterior cameras, are covered by UN R61.

Proposal as approved by the GRSG to delete provisions regarding the optical display of the status of the vehicle alarm system outside the passenger compartment in order to avoid driver distraction by and/or confusion of such exterior lighting with primary lighting and signaling equipment required under UN R48.

Proposal as approved by the GRSG to delete provisions regarding the optical display of the status of the vehicle alarm system outside the passenger compartment in order to avoid driver distraction by and/or confusion of such exterior lighting with primary lighting and signaling equipment required under UN R48.

Proposal as approved by the GRSG during its 108th session to introduce more stringent requirements for rear underrun protection devices..

Proposal clarify the scope and to allow for the type approval of camera-monitor systems installed in place of Class I through IV mirrors.

Proposal to insert performance requirements for the mandatory installation of odometers on vehicles.

Proposal to treat camera-monitor systems the same as rear-view mirrors under UN R26 in view of the amendment to UN R46 to enable the replacement of rear-view mirrors by CMS.

Proposal for a set of uniform terms and definitions to promote consistency across powertrain-related regulations.

Proposal to introduce a new category, ‘D9S’.

The purpose of this paper is to provide a framework through which the delegates to the World Forum for the Harmonization of Vehicle Regulations (WP.29) and other interested stakeholders can examine the experience with the 1998 Global Agreement and agree on ideas and processes for improvement in its implementation.

Pursuant to the addition of a new speed symbol for forestry tyres, this proposal would add a bonus loads column for A6-rated tyres to Annex 7-Part D. The proposal also corrects the tables concerning “Agricultural implement tyres – Normal section sizes”.

Proposal to increase the stringency of the Thorax Compression Criterion (ThCC) for the Hybrid III 5th female dummy in the passenger seat to 34 mm under the proposed new regulation to test the performance of occupant restraint systems in the event of a frontal collision. The transition date would be 1 September 2020.

Proposal to establish a new UN Regulation on uniform provisions for the approval of passenger cars with regard to their occupant-restraint system performance in the event of a frontal collision (full width rigid barrier test).

Please note: para. 5.2.8.2. should read 5 liters, not 0.5 liters maximum allowable electrolyte spillage.

UN R107 includes a provision to prevent a folding seat used by the crew from obstructing the view of the exterior rear-view mirror. In light of the proposed amendment to introduce camera-monitor systems into UN R46 (indirect vision), this proposal would extend the same treatment to CMS used in the place of rear view mirrors.

Proposal to align the tyre-selection criteria in the CO2 emissions/fuel consumption tests under UN R101 with those for pollutant emissions (UN R83).

Proposal to avoid a redundant correction of the measured engine power of supercharged and turbocharged engines fitted with a self-correcting system for ambient conditions such as temperature and altitude. The current correction factor may yield inaccurate results for such configurations.

Proposal to correct the unit of the road load coefficient b used in the formula for the calculation of the resistance to progress force.

Proposal to correct the unit of the road load coefficient b used in the formula for the calculation of the resistance to progress force.

Proposal from the Bumper Test Area Task Force to revise the procedure for determining the bumper test area under the pedestrian safety regulation. The proposal introduces a “bumper beam” method for determining the test area and includes a 31 December 2017 transition date.

Pursuant to GRPE work on vehicle propulsion system definitions (VPSD informal group; see document WP.29-165-17), this proposal would update the definition of the acronym “REESS” to refer to “rechargeable electrical energy storage system” across the passive safety regulations and currently proposed texts that make use of this acronym. (REESS had previously referred generically to “rechargeable energy storage systems”.)

Pursuant to GRPE work on vehicle propulsion system definitions (VPSD informal group; see document WP.29-165-17), this proposal would update the definition of the acronym “REESS” to refer to “rechargeable electrical energy storage system” across the passive safety regulations and currently proposed texts that make use of this acronym. (REESS had previously referred generically to “rechargeable energy storage systems”.)

Proposal to amend the regulation frontal impacts with a view towards the establishment of a new regulation on frontal impact testing for occupant restraint systems (full width rigid barrier test). The proposal increases the thorax compression criterion (ThCC) stringency to 42 mm (from 50 mm), clarifies vehicle width definition, and amends REESS acronym definition.

Proposal to align UN R94 with the draft amendment to add camera-monitor systems to UN R46 (i.e., document WP.29/2015/84). Under UN R94, the measurement for the 40% overlap between the vehicle and crash barrier excludes external rear-view mirrors. This proposal would extend the same treatment where the mirror has been replaced by an exterior camera.

Text prepared by the UN R44 Technical Services Group to clarify the regulation, including test failure parameters, CRS displacement or locking systems, seat installation color coding systems, and use of load limiting devices. The test procedure would be modified, including an increase in the applied load to exceed the maximum allowed resistance to permit sliding of the strap through the quick adjuster and through rigid parts, increased tolerances related thereto, deletion of the option for shorter shift (deemed unnecessary since it is a test on the strap, not on the complete component), and modification of drawings to improve consistency with the text.

Proposal to specify buckle-release color, use of buckle warning lights, and to clarify the installation provisions for “general use” safety-belts (Annex 1B, item 12).

Pursuant to GRPE work on vehicle propulsion system definitions (VPSD informal group; see document WP.29-165-17), this GRSP proposal would update the definition of the acronym “REESS” to refer to “rechargeable electrical energy storage system” across the passive safety regulations and currently proposed texts that make use of this acronym. (REESS had previously referred generically to “rechargeable energy storage systems”.)

Updated list of WP.29 activity.

Progress report on the development of GTR concerning safety aspects of electric vehicles.

Discussion paper concerning the transposition of GTR 15 into a UN Regulation. The paper raises two possible routes: 1) a UN Regulation identical to EU legislation but that would not be not applied (in its entirety as a distinct rule) outside the EU; 2) a “hierarchical” UN Regulation that combines all elements of all emissions thresholds at their most stringent level with lower levels of approval corresponding to regional/national requirements. The EC proposes option 2 as this would allow for a global rule where Contracting Parties could certify systems to standards outside their markets (e.g., Japan could issue approvals to EU standards and vice versa) under the UN Regulation.

Request from the SLR informal group for confirmation whether the proposed establishment of a resolution on common specifications of light source categories is acceptable. The resolution would provide a list of light sources allowed in lamps. The UN Office of Legal Affairs has stated that a resolution may not be used to amend a regulation, raising a possible question of interpretation. The SLR informal group also asks whether the proposed resolution can be provided only in English.

Presentation from the PTI informal group on the future development of the 1997 Agreement.

Proposal to address a possible situation where a whole vehicle type approval is issued based upon an earlier version of a regulation where the latest version of that regulation has been narrowed or requirements of the earlier version have been made optional in the later version.

Presentation on new law to govern the establishment of technical regulations in Russia.

Proposal to extend the mandate of the informal working group on the development of the 1958 Agreement and an international whole vehicle type approval system (IWVTA informal group).

Proposal of the IWVTA informal group for an explanatory document covering the international whole vehicle type approval.

Summary of the status of the proposals for UN Regulation changes adopted during the March 2015 session of WP.29. These adopted regulations entered into force on 8 October 2015 following the statutory waiting period to allow for review by the Contracting Parties to the 1958 Agreement.

Presentation of research conducted by the World Blind Union and National Federation of the Blind in the United States to validate the effectiveness of the proposed minimum sound levels for quiet vehicles at 10 and 20 km/h. The researchers concluded that the proposed sounds levels do not add significantly to the detectability of an approaching vehicle by a blind pedestrian and that internal combustion engine vehicles were detected substantially sooner than quiet vehicles equipped with the proposed acoustic vehicle alerting system (AVAS).

Comments received from OICA, CLEPA/MEMA/JAPIA, and Transport Canada with “trilateral group” (EU/USA/Japan) responses.

Summary of UNECE activities related to automated vehicle systems and driving.

World Blind Union comments opposing the current provisions of the draft UN Regulation on quiet vehicle minimum sound levels, especially with regard to the effectiveness of the AVAS parameters, inclusion of “pause button”, and absence of stationary (“idling”) vehicle sound requirement.