| UN R134: Proposal for a Supplement 2 to the 03 series of amendments |
| Reference Number: GRSP/2026/7 |
|
Proposal to amend para. 2.1. to clarify the definition of appropriate adaptor as a test component specified by the CHSS manufacturer that substitutes for container valve, additional TPRD, and end plug, add a Note explaining container valve and end plug embodiments and supply line connection options, add sentences to paras. 5.1.1., 5.1.2., 5.2., 9.2.1., 9.2.3.2., and Annex 3 para. 2.1. to specify that connections between supply lines for additional TPRDs and appropriate adaptors shall meet requirements and are within the scope of the test, delete “through appropriate adaptors” from Annex 3 para. 5.1., and delete the word “hydraulic” in two instances in para. 9.2.1. to clarify that gas can be used as an option for this test. |
| Submitted by: TFH2 |
| Meeting Sessions: 80th GRSP session (7-11 Dec) |
| Document date: 16 Sep 26 |
| Document status: Formal GR review |
| Relevant to: UN Regulation No. 134 | Hydrogen fuel cell vehicle safety |
| Click here to view the full document file |
| UN R22: Proposal for a Supplement 4 to the 06 series of amendments |
| Reference Number: GRSP/2026/8 |
|
Proposal to amend paras. 15.1.1. to 15.1.4. to change the transitional provisions and allow Contracting Parties to issue approvals according to the 05 series of amendments. As from entry into force of the 06 series, no Contracting Party shall refuse approval under the 06 series. As from 18 months after entry into force, no Contracting Party shall grant approvals unless the helmet or visor type meets the 06 series requirements. As from 30 months after entry into force, all Contracting Parties shall prohibit approval marks referring to type approvals granted under the preceding series. As from 36 months after entry into force, Contracting Parties may prohibit the sale of helmets and visors which do not meet the 06 series requirements. |
| Submitted by: Netherlands |
| Meeting Sessions: 80th GRSP session (7-11 Dec) |
| Document date: 16 Sep 26 |
| Document status: Formal GR review |
| Relevant to: UN Regulation No. 22 | Helmets and Visors |
| Click here to view the full document file |
| UN R145: Proposal for a Supplement 3 to the 01 series of amendments |
| Reference Number: GRSP/2026/9 |
|
Proposal to:
|
| Submitted by: STCBC |
| Meeting Sessions: 80th GRSP session (7-11 Dec) |
| Document date: 17 Sep 26 |
| Document status: Formal GR review |
| Relevant to: UN Regulation No. 145 | ISOFIX anchorages systems, ISOFIX top tether anchorages and i-Size seating positions |
| Click here to view the full document file |
| UN R173: Proposal for a 02 series of amendments |
| Reference Number: GRSP/2026/10 |
|
Proposal to:
|
| Submitted by: STCBC |
| Meeting Sessions: 80th GRSP session (7-11 Dec) |
| Document date: 17 Sep 26 |
| Document status: Formal GR review |
| Relevant to: UN Regulation No. 173 | Installation of safety belts, restraint systems, child restraint systems, ISOFIX child restraint systems and i-Size child restraint systems |
| Click here to view the full document file |
| Proposal for a new UN Regulation concerning the approval of M₂ and M₃ vehicles to assist in the prevention of children being left inside |
| Reference Number: GRSP/2026/11 |
|
Proposal to establish uniform provisions concerning the approval of M₂ and M₃ special purpose vehicles designed specifically for the carriage of children to assist in the prevention of children being left inside. The regulation applies to vehicles of categories M₂ and M₃, class B and III. Vehicles shall be equipped with a physical inspection system that engages when the vehicle master control switch is turned off and generates an external visual and audible warning if not disarmed within 3 minutes for buses or coaches not exceeding 22 passenger seats, or within 5 minutes for those exceeding 22 passenger seats. The physical inspection system shall not influence the bus or coach’s performance or safe operation, and failure of the system shall not affect safe operation of the vehicle. |
| Submitted by: CLIV |
| Meeting Sessions: 80th GRSP session (7-11 Dec) |
| Document date: 25 Sep 26 |
| Document status: Formal GR review |
| Relevant to: WP.29 Regulatory Project | Children left in vehicles |
| Click here to view the full document file |
| UN R21: Proposal for a Supplement 7 to the 01 series of amendments |
| Reference Number: GRSP/2026/12 |
|
Proposal to:
|
| Submitted by: OICA |
| Meeting Sessions: 80th GRSP session (7-11 Dec) |
| Document date: 21 Sep 26 |
| Document status: Formal GR review |
| Relevant to: UN Regulation No. 21 | Interior Fittings |
| Click here to view the full document file |
| UN R129: Proposal for a 06 series of amendments |
| Reference Number: GRSP/2026/13 |
|
Proposal to:
|
| Submitted by: Netherlands |
| Meeting Sessions: 80th GRSP session (7-11 Dec) |
| Document date: 22 Sep 26 |
| Document status: Formal GR review |
| Relevant to: UN Regulation No. 129 | Enhanced Child Restraint Systems |
| Click here to view the full document file |
| UN R129: Proposal for Supplements to the 04 and 05 series of amendments |
| Reference Number: GRSP/2026/14 |
|
Proposal to replace the reference to EN 71-3:2019+A1:2021 with EN 71-3:2019+A2:2024 in para. 6.3.1.1. and replace the reference to EN 71-2:2020 with EN 71-2:2020+A1:2025 in para. 6.3.1.2. The versions currently referenced have been withdrawn by the European Committee for Standardization, and updating the references to the latest published versions will avoid administrative burdens during the type-approval process of enhanced child restraint systems. |
| Submitted by: CLEPA |
| Meeting Sessions: 80th GRSP session (7-11 Dec) |
| Document date: 21 Sep 26 |
| Document status: Formal GR review |
| Relevant to: UN Regulation No. 129 | Enhanced Child Restraint Systems |
| Click here to view the full document file |
| UN R170: Proposal for a Supplement 1 to the 01 series of amendments |
| Reference Number: GRSP/2026/15 |
|
Proposal to replace the reference to EN 71-3:2019 with EN 71-3:2019+A2:2024 in para. 7.3.1.1. The current version of the European Standard for toxicity has been withdrawn by CEN and replaced with a new version. This update reflects the latest published version of the standard to avoid administrative burdens during type-approval of built-in child restraint systems for vehicles of M2 and M3. |
| Submitted by: CLEPA |
| Meeting Sessions: 80th GRSP session (7-11 Dec) |
| Document date: 21 Sep 26 |
| Document status: Formal GR review |
| Relevant to: UN Regulation No. 170 | Child Restraint Systems for Buses and Coaches |
| Click here to view the full document file |
| UN R11: Proposal for a 05 series of amendments |
| Reference Number: GRSP/2026/16 |
|
Proposal to:
|
| Submitted by: EDO |
| Meeting Sessions: 80th GRSP session (7-11 Dec) |
| Document date: 28 Sep 26 |
| Document status: Formal GR review |
| Relevant to: UN Regulation No. 11 | Door Latches and Door Retention Components and WP.29 Regulatory Project | Emergency Door Opening |
| Click here to view the full document file |
| UN R21: Proposal for a 02 series of amendments |
| Reference Number: GRSP/2026/17 |
|
Proposal to insert para. 5.8.4.2. requiring electric side window controls adjacent to the front seat row be within reach and directly accessible without multiple actions, renumber former para. 5.8.4.2. as para. 5.8.4.3., insert para. 5.8.8. requiring electric side windows of the front seat row to function for at least 2 minutes during vehicle submergence, and insert Annex 11 describing submergence test procedures including container-based and slope-entry methods. |
| Submitted by: EDO |
| Meeting Sessions: 80th GRSP session (7-11 Dec) |
| Document date: 25 Sep 26 |
| Document status: Formal GR review |
| Relevant to: UN Regulation No. 21 | Interior Fittings and WP.29 Regulatory Project | Emergency Door Opening |
| Click here to view the full document file |
| GTR 1: Proposal for Amendment 3 |
| Reference Number: GRSP/2026/18 |
|
Proposal to amend UN GTR No. 1 to introduce requirements for emergency door opening. The amendment addresses safety concerns arising from electrically operated door opening systems by requiring that power-assisted latch release controls, unlock controls, and door opening systems remain capable of functioning after main power supply loss for at least 60 minutes by means of secondary mechanical means, active secondary power supply, or fail-safe systems. The amendment also introduces definitions for latch release control, door handle, retractable door handle, unlock, unlatch, power loss, vehicle master control switch, and main power supply; requires latch release controls and door handles to be intuitive and unobstructed; and establishes interior and exterior test procedures to verify compliance with power loss requirements. |
| Submitted by: EDO |
| Meeting Sessions: 80th GRSP session (7-11 Dec) |
| Document date: 25 Sep 26 |
| Document status: Formal GR review |
| Relevant to: GTR No. 1 | Door Locks and Door Retention Components and WP.29 Regulatory Project | Emergency Door Opening |
| Click here to view the full document file |
| UN R21: Proposal for a Supplement 7 to the 01 series of amendments |
| Reference Number: GRSP/2026/19 |
|
Proposal to:
|
| Submitted by: CLEPA |
| Meeting Sessions: 80th GRSP session (7-11 Dec) |
| Document date: 28 Sep 26 |
| Document status: Formal GR review |
| Relevant to: UN Regulation No. 21 | Interior Fittings |
| Click here to view the full document file |
| Proposal for a new UN Regulation concerning the approval of vehicles of category N1Y with regard to their crashworthiness |
| Reference Number: GRSP/2026/20 |
|
Proposal to establish uniform provisions for type approval of vehicles of category N₁Y regarding fuel system integrity, electrical shock protection, and crash compatibility in frontal, lateral, and rear-end collisions. Requirements cover fuel leakage limits, hydrogen storage system integrity post-crash, high voltage electrical safety, REESS protection, and crash compatibility criteria. Tests reference UN R94, UN R95, UN R137, and UN R153. Vehicles derived from already-approved types may use previous test results if mass increase does not exceed 8 per cent. Approval marks and type approval procedures follow standard 1958 Agreement schedules. |
| Submitted by: GRSP-TF-AVRS |
| Meeting Sessions: 80th GRSP session (7-11 Dec) |
| Document date: 28 Sep 26 |
| Document status: Formal GR review |
| Relevant to: UN Regulation No. 94 | Occupant Protection in Frontal Collisions, UN Regulation No. 95 | Occupant Protection in Lateral Collisions, UN Regulation No. 137 | Restraint System in Frontal Impact, UN Regulation No. 153 | Fuel System Integrity and Electric Power Train in a Rear-End Collision, and WP.29 Regulatory Project | Approval of vehicles of category Y (without occupants) with regard to their crash safety |
| Click here to view the full document file |
| UN R42: Proposal for a Supplement 3 to the original series of amendments |
| Reference Number: GRSP/2026/21 |
|
Proposal to insert a new introduction section accounting for vehicles of categories X and Y equipped with an Automated Driving System (ADS), amend footnote 1 to reference the Consolidated Resolution on the Construction of Vehicles (R.E.3.), document ECE/TRANS/WP.29/78/Rev.8, and amend para. 6.1.5. to clarify that the exemption for sensors and driver assistance systems does not apply to vehicles of categories X and Y or automated driving systems unless the ADS performance of the Designated Driving Task is not affected. |
| Submitted by: GRSP-TF-AVRS |
| Meeting Sessions: 80th GRSP session (7-11 Dec) |
| Document date: 28 Sep 26 |
| Document status: Formal GR review |
| Relevant to: UN Regulation No. 42 | Front and Rear Protective Devices and WP.29 Regulatory Project | Review of Regulations for Applicability to ADS Vehicles |
| Click here to view the full document file |
| UN R127: Proposal for a Supplement 5 to the 04 series of amendments |
| Reference Number: GRSP/2026/22 |
|
Proposal to amend para. 0. to extend application to vehicles of category Y, amend para. 1.4. to exclude category Y vehicles and certain category N₁ vehicles, add definitions and clarifications for category Y vehicles in paras. 2.8., 2.22., 2.29., 2.32., 2.44., and 2.45., and replace wording in para. 5.3.1.2. concerning Automated Driving System activation and delete footnote 9. |
| Submitted by: EC |
| Meeting Sessions: 80th GRSP session (7-11 Dec) |
| Document date: 28 Sep 26 |
| Document status: Formal GR review |
| Relevant to: UN Regulation No. 127 | Pedestrian Safety and WP.29 Regulatory Project | Review of Regulations for Applicability to ADS Vehicles |
| Click here to view the full document file |
| UN R129: Proposal for a Corrigendum 1 to Supplement 2 to the 03 series of amendments and a Corrigendum 1 to Supplement 3 to the 03 series of amendments |
| Reference Number: GRSP/2026/24 |
|
Proposal to insert a new paragraph 4.10. requiring any removable insert to have a permanently attached label indicating brand, model and size range with a minimum label size of 40 × 40 mm or equivalent area, and renumber paragraphs 4.10. (former) to 4.12. as paragraphs 4.11. to 4.13. in Supplement 2, and renumber paragraphs 4.11. (former) to 4.13. as paragraphs 4.12. to 4.14. in Supplement 3 to correct paragraph numbering mistakes in section 4. |
| Meeting Sessions: 80th GRSP session (7-11 Dec) |
| Document date: 28 Sep 26 |
| Document status: Formal GR review |
| Relevant to: UN Regulation No. 129 | Enhanced Child Restraint Systems |
| Click here to view the full document file |
| UN R100: Proposal for a Supplement 2 to the 05 series of amendments |
| Reference Number: GRSP/2026/25 |
|
Proposal to:
|
| Submitted by: OICA |
| Meeting Sessions: 80th GRSP session (7-11 Dec) |
| Document date: 14 Oct 26 |
| Document status: Formal GR review |
| Relevant to: UN Regulation No. 100 | Construction and Safety of Electric Powertrains |
| Click here to view the full document file |
| UN R100: Proposal for a guidance document on the "type of REESS" |
| Reference Number: GRSP/2026/26 |
|
Guidance document on interpreting “type of REESS” (Rechargeable Electrical Energy Storage System) as defined in paragraph 2.48. of UN Regulation No. 100. The document establishes that when judging whether differences are significant, the evaluation should be from the perspective of whether the difference has a substantial impact on the safety performance of the REESS as required by UN Regulation No. 100. It provides consideration on essential aspects including manufacturer’s trade name or mark, chemistry, capacity and physical dimensions of cells, number of cells and mode of connection, construction and materials of casing, and ancillary devices for physical support, thermal management and electronic control. |
| Submitted by: OICA |
| Meeting Sessions: 80th GRSP session (7-11 Dec) |
| Document date: 14 Oct 26 |
| Document status: Formal GR review |
| Relevant to: UN Regulation No. 100 | Construction and Safety of Electric Powertrains |
| Click here to view the full document file |
| Child Presence Detection for M2 and M3 Vehicles: Justification for GRSP/2026/11 |
| Reference Number: GRSP-80-04 |
|
Proposal to establish a new UN Regulation for vehicles of categories M2 and M3, class B and III designed specifically for carriage of children, to prevent children being left unattended and reduce risk of Pediatric Vehicular Heatstroke. The regulation requires vehicle-based warning systems with Physical Inspection Devices that generate external visual and audible warnings within pre-determined time limits if drivers do not inspect passenger compartments before leaving vehicles. External visual warnings use direction indicator lamps already type-approved; audible warnings use type-approved horns or reverse alarm devices, or must pass specified test procedures. The regulation focuses on physical inspection systems as an intuitive, effective, widely available solution, while remaining technology-neutral to permit future inclusion of other prevention means as they mature. |
| Submitted by: CLIV |
| Meeting Sessions: 80th GRSP session (7-11 Dec) |
| Document date: 28 Oct 25 |
| Relevant to: WP.29 Regulatory Project | Children left in vehicles and WP.29 Regulatory Project | Child Presence Detection Systems for M2 and M3 vehicles |
| Click here to view the full document file |
| UN R95: Proposal for a Supplement 4 to the 04 series, a Supplement 6 to the 05 series, and a Supplement 4 to the 06 series of amendments |
| Reference Number: GRSP-80-05 |
|
Proposal to amend para. 5.3.1. to clarify the direction of the force applied to verify that the door has not been opened during the test. The requirement is deemed fulfilled if the door does not open under a static tractive force of at least 400 N in the y-direction applied to the door, as close as possible to the window sill and to the edge of the door opposite to the hinged side, except to the door handle itself. This clarification applies to all different types of doors, including doors which open vertically or sliding doors. |
| Submitted by: Spain |
| Meeting Sessions: 80th GRSP session (7-11 Dec) |
| Document date: 30 Oct 26 |
| Relevant to: UN Regulation No. 95 | Occupant Protection in Lateral Collisions |
| Click here to view the full document file |
| UN R135: Proposal for a Supplement 4 to the original text, a Supplement 5 to the 01 series, and a Supplement 5 to the 02 series of amendments |
| Reference Number: GRSP-80-06 |
|
Proposal to insert a new section 0 to clarify the direction of the force applied to verify that the door has not been opened during the test, and amend para. 5.4.2.1. to specify that the door does not open under a static tractive force of at least 400 N in the y-direction applied to the door as close as possible to the window sill and to the edge of the door opposite to the hinged side, except to the door handle itself. |
| Submitted by: Spain |
| Meeting Sessions: 80th GRSP session (7-11 Dec) |
| Document date: 30 Oct 26 |
| Relevant to: UN Regulation No. 135 | Pole side-impact protection |
| Click here to view the full document file |
| UN R100: Request for comment on the proposals to streamline the provisions |
| Reference Number: GRSP-80-07 |
|
OICA requests comments from GRSP experts on proposals for streamlining UN R100, following presentations at the 79th session. Working documents ECE/TRANS/WP.29/GRSP/2026/25 and ECE/TRANS/WP.29/GRSP/2026/26 were released on 14 October in English only. Comments should be submitted using the template in informal document GRSP-80-07-Add.1 to facilitate consolidation of feedback and identify discussion points toward the 80th session. |
| Submitted by: OICA |
| Meeting Sessions: 80th GRSP session (7-11 Dec) |
| Document date: 09 Nov 26 |
| Relevant to: UN Regulation No. 100 | Construction and Safety of Electric Powertrains |
| Click here to view the full document file |
| UN R100: Form for comments on streamlining proposals |
| Reference Number: GRSP-80-07-Add.1 |
| Submitted by: OICA |
| Meeting Sessions: 80th GRSP session (7-11 Dec) |
| Document date: 09 Nov 26 |
| Relevant to: UN Regulation No. 100 | Construction and Safety of Electric Powertrains |
| Click here to view the full document file |
| UN R100: Proposal for a new Supplement to the 05 series of amendments |
| Reference Number: GRSP-80-09 |
|
Proposal to replace the heating rate requirement of ≥15 °C/s with ≥10 °C/s in Annex 9K Appendix 1 Table 1, and insert new Annex 9K Appendix 1bis setting out the Thermal Runaway Trigger Method with a Localized Rapid Heater within the cell casing. The new appendix specifies preparation of the tested-device, selection guide for the heater element with target parameters including material, thickness, area, heating rate, maximum temperature and control method, test procedures for vehicle-based testing, and test procedures for component-based testing. |
| Submitted by: OICA |
| Meeting Sessions: 80th GRSP session (7-11 Dec) |
| Document date: 11 Nov 26 |
| Relevant to: UN Regulation No. 100 | Construction and Safety of Electric Powertrains |
| Click here to view the full document file |
No matching documents.
Working Party on Passive Safety (cf French: Groupe de Rapporteurs sur la Sécurité Passive)
Global Technical Regulation
Rechargeable Electrical Energy Storage System: term to cover Li-ion batteries and any other devices for the storage of energy to power electrified vehicles.