Monday 18 May 2026 will cover adoption of the agenda, highlights of the March 2026 WP.29 session, artificial intelligence in vehicles, and connected vehicles including cyber security, software updates, data protection, and data communication. Tuesday 19 May will address automated and autonomous connected vehicles, including IWG on ADS, GRVA workshops, EDR/DSSAD deliverables, and UN R157. Wednesday 20 May will cover driver control assistance systems, UN R79, acceleration control, emergency lane keeping, and advanced emergency braking. Thursday 21 May will address advanced driver assistance systems covering UN Regulations Nos. 13, 13-H, 139, 140 and UN GTR No. 8, motorcycle braking, and UN R90. Friday 22 May will cover revision 3 to the 1958 Agreement and other business.

GRVA-25 agenda includes adoption of agenda; briefing on WP.29 March 2026 session highlights; resumption of Artificial Intelligence discussions; review of draft UN Global Technical Regulation and draft UN Regulation on Automated Driving Systems; resumption of UN Regulation No. 157 considerations regarding market introduction notification and remedial action upload to DETA database; consideration of Information Sharing for Scenario-Based Assessment informal working group proposal; briefing on cyber security and over-the-air issues; resumption of Driver-Control Assistance Systems, steering equipment, and Advanced Emergency Braking and Blind Spot Information Systems considerations; review of Electronic Stability Control and Electrical Transmission Braking Systems proposals; resumption of e-trailer approval amendments to UN Regulation No. 13; consideration of motorcycle braking and replacement braking parts proposals; briefing on national activities; status report on International Whole Vehicle Type Approval revision activities; resumption of connected and automated vehicles sustainability discussions; and adoption of proposed decisions list.

AC.1 adopted all amendments proposals to UN Regulations submitted by GRVA. AC.2 supported a swap between the GRVA session in October 2026 and the WP.1 session in September 2026 and discussed possibilities to change working methods. AC.3 welcomed progress on development of a new UN GTR and a new UN Regulation on ADS and noted the status report on ACPE activities. WP.29/1188 contains further details.

This document lists the decisions taken during the GRVA session in Montreal. These decisions will be formally considered and likely adopted during a session on 23 June in Geneva.

Since the 24th (January 2026) GRVA session, the ADAS task force held an online session on 3 March 2026. A 02 series of amendments to UN R171 (GRVA-24-17/Rev.2) was approved and submitted to WP.29 as WP.29/2026/86. Draft supplements and consolidated and extracted versions for 00 and 01 series were prepared (GRVA-24-18-A, GRVA-24-19-A, GRVA-24-18-B, GRVA-24-19-B). For the 25th GRVA session, editorial modifications and consolidated and extracted versions were submitted (GRVA/2026/14, GRVA/2026/15, GRVA/2026/16, GRVA/2026/17, GRVA/2026/18). The task force seeks guidance on provisions for DCAS use on highway-like roads and feedback on existing provisions following practical implementation of UN R171. The ADAS task force will be maintained with a break in activities pending stakeholder inputs and concrete proposals.

Proposal to amend Annex 1B, paragraph 1. to add “If applicable,” before “name and address of manufacturer’s representative” and to renumber the existing paragraph 2 as paragraph 1. This proposal resolves inconsistency between communication forms 1A and 1B of UN R90. The term used for responsible entities, the manufacturer’s representative, was modified only in communication form 1A for replacement brake lining assemblies and replacement drum brake linings, so communication form 1B for replacement brake discs and replacement brake drums requires the same amendment to ensure consistency.

Proposal to amend para. 5.1.3. of UN R155 to add a refusal ground where the Certificate of Compliance for the Cyber Security Management System has not been issued by the same approval authority granting type approval, and insert new para. 5.4. into UN R156 to provide that approval authorities shall not grant any type approval if the Certificate of Compliance for the Software Update Management System has not been issued by the same approval authority granting type approval. The proposal, based on TFCS-37-02, ensures that Certificates of Compliance and type-approvals for UN R155 and UN R156 are issued by the same approval authority to enable holistic assessment and clarify reporting obligations.

Based on GRVA-25-08, the document addresses blind spot accidents involving right-turning trucks and bicycles. It distinguishes between warning systems requiring driver reaction time and automatic brake intervention systems. The document notes that information systems with low intensity have low annoyance and low risk of deactivation, while high-intensity warnings risk driver annoyance and deactivation. It describes a specific scenario at approximately 15 km/h where a truck brakes after a turn has started with a bicycle detected at high confidence. The document indicates that next steps in safety regarding blind spot accidents should involve automatic brake intervention and suggests future discussion of UN R151 in GRVA.

Proposal to insert new sub-paragraph 5.6.1.1.4.1 establishing that requirements of paragraph 5.6.1.1.4 shall not apply to ACSF Category A functions provided they are intended solely to support low-speed vehicle controllability manoeuvres in off-road environments, operate only until 5km/h with 1km/h tolerance, require deliberate driver activation, require driver presence in driver’s seat with fastened safety belt, and allow driver to retain control and override or deactivate the system at any time.

Proposal to amend para. 2.8 of Annex 8 to add subparagraph (c). The amendment addresses trailers utilizing service braking system energy reserves for automatic brake requirements. Current para. 2.8 includes options (a) and (b) requiring spring brake pressure reduction or corresponding pressure reduction in spring compression chamber. New subparagraph (c) permits alternative designs where combined service braking and parking braking system activation holds a laden trailer on 18 percent gradients at any service brake energy reservoir pressure from 850 kPa to 0 kPa, providing greater realization flexibility while maintaining required holding performance.

Proposal to amend para. 2.8 of Annex 8 to UN R13 to require trailers utilizing service braking system energy reserves to fulfil one of three requirements when uncoupled and park brake control released: pressure in spring brake compression chamber shall reduce to 0 kPa when energy reserves reduce to 280 kPa, pressure reduction in service braking system energy reserve results in corresponding reduction in spring compression chamber pressure, or combined service and parking braking forces shall hold laden trailer as required when service brake energy reservoir reduces from 850 kPa to 0 kPa.

The document addresses on-board authentication and authorization in connected vehicles, a complex area involving multiple stakeholders, use cases, implementations, and standards. The core challenge is distinguishing legitimate remote interactions from misuse, manipulation, and integrity loss. Discussions have occurred since 2023 across GRVA, CS/OTA, and WP.29. FIA seeks feedback on establishing the topic and will develop a scoping document and demonstrator based on select use cases including accident investigation, law enforcement, emergency response, energy monitoring, battery tracking, parts replacement, and ITS-related safety. Contracting parties are invited to submit comments and use cases by 15 June 2026 for consideration at the November WP.29 session.

Proposal to amend para. 5.6.1.2.7. to increase the maximum RCP operating range from 6 m to 15 m. UN R79 currently limits the maximum RCP operating range to 6 m, resulting in effective usable range of 2 or 3 m due to radio wave-based ranging inaccuracy. A 15-meter range would enhance RCP function usefulness and safety, reducing driver movement and blind areas. RCP systems with extended ranges have been used in large markets without identified safety threats. The amendment is proposed as a supplement to the 03 and 04 series of amendments to UN R79.

Proposal to establish an informal working group on Exchange of scenario-relevant information (ESRI) as a subsidiary body of GRVA to develop procedures facilitating the sharing of DDT-relevant building blocks and knowledge from performance analyses and incident investigations, to structure such information to support scenario development and use, to propose means for managing and publicly sharing information in accordance with WP.29 procedures, and to provide recommendations for application and management, with outcomes to be presented within two years from approval to form the IWG by GRVA.

The workshop on scenarios discussed scenario-related information-sharing procedures and exchange, including to facilitate implementation of regulations using scenario-based assessments, develop administrative procedures to gather scenario-related information from CPs and NGOs, identify useful information to share, and clarify scenario use needs. At the same time, the workshop explicitly excluded activities such as creating a scenario catalogue and/or database, developing regulatory scenarios, and developing methodologies to create and derive scenarios for regulatory purposes. The group discussed whether scenarios work should operate as a dedicated working group under GRVA or as part of an existing group, considering resource constraints and the importance of supporting WP.29 activities like ADS and ADAS regulations.

The AI IWG held four meetings between January and April 2026, with future meetings scheduled for June 2026. Co-Chairs are from the UK, Japan, and the U.S.; Co-Secretaries represent IEEE, CITA, and SAE. WP.29 approved an updated Terms of Reference in March 2026. The IWG has compiled literature on regulated automotive safety systems using AI (AI-08-03), created draft documents on Terms & Definitions (AI-06-03), use cases (AI-07-03), and guiding questions (AI-08-07). An initial consolidated draft document (AI-09-06) addresses what AI is and how it is used in the automotive sector, what benefits and risks it presents, and emergent practices for AI use and risk management. Initial outputs will be reported to WP.29 at the June 2026 meeting.

The Task Force on Vehicular Communications held a hybrid meeting on 23 January 2026, with presentations from Japan, CAICT China, and Car-to-Car Communications Consortium covering communications approaches to improve protection of vulnerable road users. The 14th VCTF meeting is scheduled for Wednesday 11 June 13:00–16:00 CET to discuss tests and ideas for improving VRU protection through communications. The Future Networked Car Symposium will be held in hybrid format on 9 July 2026 at Palexpo Geneva, jointly organised by UNECE and ITU, with the WP.29 related session in the morning of Thursday 9 July.

Proposal to insert new para. 3.1.1. and 3.1.2. requiring manufacturers to provide information to approval authorities prior to application and upon extension of type approval; insert new para. 3.2.2. requiring manufacturers to provide summaries of safety definitions, driver safety levels, traffic rules assessment, and testing for each territory where ALKS can be active; and insert new paras. 4.6. to 4.6.6. establishing procedures for approvals covering multiple territories, including notification of receiving approval authorities at least 30 days before approval, review periods, and dispute resolution under the 1958 Agreement. OICA and CLEPA do not support mandatory pre-announcement but would support sharing Safe Operation documentation and lists of compliant territories during the approval process.

The EV/HFCV Retrofit Systems IWG held three meetings since the last GRVA session and has compiled requirements for Electrical Safety (UN R100), Braking (UN R13/R13H), Cybersecurity (UN R155), and EMC (UN R10) with participation of respective GRs experts. Regulation drafting has started. Next activities include continuation of discussion on requirements, addressing net power and electric consumption determination, family and parent definition, and provisions for PTI, with regulation draft for EV retrofit to be delivered as informal document to the next GRPE session in October.

This Guidance and Interpretation Document (GID), based on GRVA/2026/3 as amended by GRVA-24-29 and WP.29-198-09, supports implementation of proposed UN Global Technical Regulation and UN Regulation on Automated Driving Systems. The GID, structured in table format with regulatory text and explanatory guidance with examples, facilitates interpretation of ADS requirements when applying them to particular vehicles or vehicle types. The document addresses ADS safety, system descriptions, operational design domains, performance in nominal, critical, and failure situations, interactions between ADS and users, manufacturer safety management systems, test environments including simulation credibility frameworks, safety cases, post-deployment safety monitoring, and compliance assessments including confirmatory testing. Materials will be restructured and refined for submission to GRVA’s September 2026 session.

Proposal to amend WP.29/2026/139 to amend para. 4.2.2.3.8.1. subparagraph (b) regarding user engagement to resume the DDT, insert new para. 5.2.1.8.1. requiring manufacturers to document simulation toolchain scope and limitations, amend para. 5.2.1.3.1. regarding manufacturer management of relevant data, amend para. 5.3.1.16. describing ADS responses to failure situations, amend para. 6.3.2.2.3. regarding scenario assessment, amend para. 6.3.3.3.1. regarding confirmatory track testing provisions, amend Annex 5 Tables 3, 4, and 5 regarding scenario specifications and risk manoeuvre conditions, and amend Annex 6 para. 5.3.1. and 5.3.2. regarding DSSAD recording requirements and intervals.

Proposal to amend ECE/TRANS/WP.29/2026/137 to replace placeholder text “[ADS]”, “[XXX]”, and “[number of this Regulation]” with the UN Regulation number upon adoption, amend the cross-reference in paragraph 1.2. to “7.2.3.17.”, amend paragraph 6.2.2.3.8.1. subparagraph (b) to specify gaze directed to “the” driving task relevant area, remove brackets around “7.4.” in paragraph 11.2., add a period after the number in Annex 1 paragraph 5.1., amend Annex 1 Appendix 1 paragraphs 1.4.5. and 1.4.7., renumber paragraphs 1.4.12., 1.4.12.1., and 1.4.12.2. as 1.4.11.5., 1.4.11.5.1., and 1.4.11.5.2., amend Annex 1 Appendix 2, amend Annex 7 table 5 rows 1 and 2 column 7, remove brackets in Annex 8 paragraphs 5.3.1. and 5.3.2., and insert “Mandatory” in Annex 8 table row 1 column 2.

Proposal to amend para. 137 to describe the seventeenth workshop organized in Bangkok, Thailand, together with the twentieth session of the IWG on ADS, where participants reviewed updates to the GID document sections prepared by the OPIs, resulting in a revised version of the GID document considered mature enough for presentation at the twenty-fifth GRVA session, with agreement that remaining open items should be finalized at the July 2026 workshop in Brussels, Belgium, and several minor amendments to the draft GTR/UN-R text derived from the Bangkok meeting discussions modified the text of the draft GTR/UN-R.

Proposal to amend Annex 8, para. 3.4.1. to require the vehicle manufacturer to supplement its statement with an explanation of how the chosen strategy ensures system objectives do not prejudice safe operation of systems referred to and a description of the validation plan, and to require the designated technical service to perform an assessment of the manufacturer’s explanation and validation plan suitability and may perform or require tests as specified in para. 4., and amend Annex 8, para. 3.4.4. to require documentation supported by analysis showing system behaviour on fault occurrence including faults with other systems involved in achieving system function, to establish and maintain analytical approaches open for inspection by the designated technical service at type approval, and to require the designated technical service to perform assessment including inspection of safety approach at concept and system levels and validation plans and results.

Since the 24th session of GRVA, the Workshops on Automated Driving Systems held four sessions, with meetings in Shanghai and Bangkok. Administrative requirements for the draft UNR/GTR ADS require no further discussion. Task 3 developed interpretations and guidance for implementation, consolidated in a draft Guidance and Interpretation Document presented as informal document GRVA-25-20, with remaining items for refinement at a July Brussels hybrid joint IWG/WS session. The GID will be made available in English, French, and Russian, with the IWG ADS maintaining it. Formal adoption is projected for November WP.29 following September GRVA discussion.

The ADS informal working group status report to GRVA documents progress since the 24th GRVA session in January 2026. The group accepted proposals to make minor amendments to GTR and UNR, and accepted proposals to amend GTR and UNR to introduce DSSAD provisions. Working documents WP.29/2026/139 (GTR) and WP.29/2026/137 (UNR) were submitted for WP.29’s 199th session. For the 25th GRVA session, GRVA-25-21 and GRVA-25-22 were submitted as informal documents to amend WP.29/2026/137 and WP.29/2026/139. GRVA seeks a 3-year extension of the IWG-ADS mandate, with revised Terms of Reference to be prepared for GRVA-26 in September 2026.

Task Force FADS status report to GRVA presents final fitness information for GRVA Regulations relevant for automated vehicles. R157 (ALKS), R171 (DCAS), R178 (ELKS), R13, R13-H, R79, R89, R90, R130, R131, R139, R140, and R152 have been amended or are receiving amendments to clarify interactions with ADS features or account for vehicles of categories X and Y. R175, GTR3, and GTR8 require no amendments or formal amendment sponsorship. GRVA proposals for 13 working documents are expected at the 199th WP.29 session in June 2026, including WP.29/2026/85, WP.29/2026/86, WP.29/2026/87, WP.29/2026/79, WP.29/2026/80, WP.29/2026/81, WP.29/2026/82, WP.29/2026/83, WP.29/2026/168, and WP.29/2026/84. Task Force FADS mandate will conclude at the end of June 2026.

The IWG on EDR/DSSAD, chaired by the USA, the Netherlands, and Japan, develops proposals for Event Data Recorders and for Data Storage Systems for Automated Driving per ECE/TRANS/WP.29/2019/34. Completed work includes EDR requirements under UN R160 and amendments, EDR for heavy-duty vehicles under UN R169, and DSSAD requirements under UN R157. Current activities include DSSAD guidance document revision and EDR Step 2 and Step 3 development scheduled for March 2027 and November 2028 respectively. The DSSAD Guidance has been transferred to Annex 6 or Annex 8 of the ADS Regulation, with general requirements added to the main body.

Proposal to amend GRVA/2026/13 and the 00 and 01 series of amendments of UN Regulation No. 157, modify the Introduction to remove reference to 60 km/h maximum speed and change “override” to “deactivate”, amend para. 5.1.1. to clarify that the activated system shall be free of unreasonable risks for both vehicle occupants and other road users and shall not cause reasonably foreseeable and preventable collisions, amend para. 10.1.1. to remove reference to foot controls, amend Annex 4 para. 3.5.4. to require manufacturers to report critical incidents to the Type Approval Authority, insert new Annex 4 para. 3.5.4.1. requiring the Type Approval Authority to upload information to DETA within 14 days of receipt, and insert new Annex 7 providing guidance for data exchange via DETA in accordance with para. 3.5.4.1. of Annex 4.

Proposal to insert provisions on software identification and software updates into UN R13, UN R13-H, UN R79, UN R89, UN R130, UN R131, UN R152, UN R155, UN R156, UN R157, UN R171, UN R175, and UN R178 by adding definitions referencing Consolidated Resolution R.E.3 Annex 7, requiring manufacturers to provide Technical Services with information on hardware and software influencing performance, permitting vehicle manufacturers to apply for new approvals differentiating software versions for registered versus new vehicles, clarifying that production discontinuation does not apply when manufacturers seek approval extensions for software updates of registered vehicles, and amending communication forms to include software identification numbers and related information.

Proposal to amend para. 5.3.2. to require approval authorities to notify other approval authorities of methods and criteria used to assess measures taken in accordance with the Regulation, insert new para. 8.2. to exclude equipment with negligible intrinsic cyber security risk from further assessment where installation does not impinge on the cyber security management system and is connected exclusively via an approved interface, insert new para. 8.3. to exclude standard domestic, business or industrial equipment connected only for power from further assessment where the equipment is unmodified and complies with applicable regional and national cyber security requirements, and amend Annex 1 to include any equipment excluded from assessment pursuant to paras. 8.2. and 8.3.

Proposal to insert new Part C providing guidance on application of UN R155 to transformed vehicles. Part C defines when transformations require new approval, establishes terminology for original vehicle types, transformed vehicle types, transformations, and installations, identifies cyber-relevant transformations by evaluating impact on architecture and connection risks, addresses intrinsic cyber security risks, clarifies non-automotive equipment requirements, and specifies documentary evidence manufacturers must provide to approval authorities or technical services, including functional descriptions, connection details, software modifications, and component lists.

Presentation on electrically propelled and recuperating trailers. The document outlines communication flows between towing vehicles and e-trailers using ISO 11992-2 over ISO 7638-1, involving parameter groups EBS14 (control), EBS28 (energy/state of charge), and EBS29 (status). Key principles include the towing vehicle setting control modes and requesting torque, with trailers reporting capabilities. The document discusses support for maximum three e-axle equipped trailers due to bandwidth limitations, enabling of e-trailer control via CANopen Service Data Objects, and backward compatibility with ISO 11992-2:2014. Amendments to UN Regulation 13 are planned with target entry into force in May 2028.

Supporting presentation on the proposal to insert a new sub-paragraph 5.6.1.1.4.1 to exempt ACSF Category A functions intended solely to support low-speed vehicle controllability manoeuvres in off-road environments from the obstacle detection requirements of paragraph 5.6.1.1.4, provided the function operates only until 5 km/h with 1 km/h tolerance, is activated deliberately by the driver in off-road environments only, requires the driver to be in the driver’s seat with safety belt fastened, and allows the driver to retain control and override or deactivate the system at any time.

The Informal Working Group on Cyber Security and Software Updates discussed amendments to UN R155 and UN R156 for multi-stage approval, including simplified handling for low-risk devices and clarification of intrinsic cyber risk assessment. The group reviewed proposals from GRVA-25-31 and GRVA-25-32 concerning continued validity of approvals and Certificate of Compliance issuance. A Sub-Working Group was established to develop component and separate technical unit approval concepts. Pending discussion include RXSWIN application to components, STUs, and the extent of application to UN R155 and UN R156, and type-approval numbering for software updates.

Proposal to remove para. 5.2.1.2. titled “Emergency braking” and delete the corresponding justification text “Update to paragraph 5.2.1.2.” At the January 2026 GRVA, it was agreed not to proceed with an amendment proposed to para. 5.2.1.2. The current proposal GRVA/2026/21 does not reflect the discussions from the previous session of GRVA.

Proposal to develop UN GTR for both assisted and automated parking. The document presents parking product classifications in China, including assisted parking (park-in/park-out, cruising capability, remote-control variants) and automated parking systems. Current UN Regulations lack specific technical requirements, test methods, and test scenarios for parking functions. China is developing national standards GB for parking combined driver assistance systems and automated parking systems, with approval expected by end of 2026 and early 2027 respectively. The proposal suggests establishing a Task Force to study applicability of current UN Regulations to parking products, then determining whether to establish an IWG or formulate new regulations.

Proposal to amend para. 5.3.3.2. to correct a referencing error by replacing the reference to para. 5.1.4. with a reference to para. 5.3.1.1., which directly relates to mechanical parts of the steering transmission, thereby removing possible uncertainty or the need to liaise with the designated technical service or approval authority to confirm interpretation of the current text.

OICA-CLEPA-EME comments on German proposal GRVA-25-07 to require the approval authority granting UN R155 or UN R156 type approvals to use CSMS or SUMS certificates signed by the same approval authority. OICA-CLEPA-EME identify that CSMS and SUMS are Management Systems covering entire manufacturer organizations, and mandating the same approval authority for Management Systems certificates and approvals will have significant consequences for original equipment manufacturers typically using multiple approval authorities in homologation. The submission proposes keeping text unchanged to allow different approval authorities for Management Systems certificates and type approval based on voluntary acceptance, implementing wording on information exchange if different approval authorities are involved, and establishing a horizontal approach for Management Systems with mutual recognition aspects considered.

In January 2022, an M₁ passenger vehicle with a detached tyre caused its Anti-lock Braking System to activate, preventing effective braking and resulting in collision with a stationary lorry. The coroner concluded the ABS functioned as intended but created an unsafe scenario by using the fastest rotating wheel as reference speed, and recommended changes to prevent future deaths. The UK proposal to amend UN R13-H would require manufacturers to affirm that strategies to achieve system objectives will not prejudice safe operation of systems under non-fault conditions, including failures of other systems involved in achieving system function such as tyres or wheels, and that documentation be supported by analysis showing how the system will behave upon any fault with bearing on vehicle control, performance, or safety, including faults with other systems involved in achieving system function.

Proposal to amend para. 3.5.1. of Annex 4 to require the manufacturer to demonstrate to the approval authority that effective processes, methodologies and tools are in place, up to date and being followed within the organization to manage the safety and continued compliance throughout the product lifecycle, and to demonstrate to the approval authority at least every three years that the safety management system continues to comply with these requirements.

Proposal to delete paragraph 1.2.6. excluding e-axle trailers with e-axles providing electric propulsion and/or incorporating an electric regenerative braking system from the scope of UN R13, and add definitions of “e-axle,” “e-axle trailer,” “dynamo function,” and “e-trailer”; add special requirements for power-driven vehicles supporting e-trailer operation, e-axle trailers equipped with dynamo function, and e-trailers of category O; add requirements for electric control lines conforming to ISO 11992-2:²⁰²⁷; specify message support and functional compatibility; and add provisions for electric regenerative braking, dynamo function, and propulsion, including parameters such as retarder torque demand priority, propulsion force limits, overriding mode activation at speeds below 15km/h, and vehicle stability function interaction.

Proposal to delete the draft “Reserved” paragraph 5.3.7.2.4.3. in GRVA/2026/18. Reserving paragraph 5.3.7.2.4.3. in the 01 series would mean that the subsequent paragraphs would be out of line with the numbering in the 02 series, making future amendments to UN R171 unnecessarily challenging.

Proposal to amend the original version (GRVA/2026/15), insert para. 5.3.7.2.1.13. to require the manufacturer to describe in the safety concept the system behaviour in case the driver is detected to be disengaged during a manoeuvre; amend the original version and the 01 series (GRVA/2026/15 and GRVA/2026/17), amend para. 3.5.1. of Annex 3 to require the manufacturer to demonstrate to the Type Approval Authority at least every three years that the safety management system continues to comply with requirements; amend the 01 and 02 series (GRVA/2026/17 and WP.29/2026/86), amend para. 2.3.2. of Appendix 2 of Annex 3; amend the 02 series (WP.29/2026/86), amend para. 4.2.5.2.19.2.1. of Annex 4; and amend the original version, 01 series and 02 series (GRVA/2026/15, GRVA/2026/17 and WP.29/2026/86), amend para. 4.2.5.2.14.1.2. of Annex 4 and para. 4.2.5.2.14.2.1. of Annex 4.

The document requests guidance on the legal basis for provisions within UN Regulations extending beyond the End-of-Production date and which authority such provisions address. Examples include UN R171 requirements for manufacturers to demonstrate safety management systems to the Type Approval Authority every three years and report annually on Driven Coded Auxiliary System operation until production is discontinued, and UN R155 requirements for Cyber Security Management Systems to apply to the post-production phase when vehicles remain operational but are no longer produced. The document poses an additional question regarding vehicle safety when manufacturers cease operations and cannot fulfill post-deployment safety provisions.

The AEBS IWG held its initial meeting virtually on 22 April with about 50 attendees. Co-Chairs are Germany and Japan; Co-Secretaries are CLEPA and SAE. The IWG is requesting minor changes to its Terms of Reference. A schedule of meetings is planned from September 2026 through September 2028, including informal meetings for input from contracting parties and industry, discussion of requirements for speed reduction in nominal conditions, and investigation of false positives, with a draft regulation document planned for January 2028 and formal submission planned for September 2028.

Proposal to revise the terms of reference and rules of procedures for the Informal Working Group on Advanced Emergency Braking Systems. The IWG shall review current regulatory actions and data on Automated Emergency Braking Systems and provide recommendations on future regulatory actions including revisions to UN Regulation No. 152. The IWG shall examine current AEBS regulations worldwide, assess accident situations for passenger vehicles, draft state-of-the-art performance requirements for collision scenarios involving pedestrians at night, investigate regulatory improvements to performance requirements, and investigate feasibility to include updated requirements to avoid false activation of AEBS for light vehicles. The IWG shall deliver complete regulatory text for AEBS for passenger vehicle requirements as revision of UN Regulation No. 152 for the September 2028 session of GRVA at the latest.

Proposal to amend GRVA/2026/14 and GRVA/2026/18: insert new paragraph 2.28.1. defining “Highway-like road” as a non-highway section with at least two lanes, designated speed limit of at least 80 km/h, no prohibition of pedestrians and cyclists, physical separation dividing opposite traffic, and no at-grade marked pedestrian crossings, rail crossings, or road intersections; amend paragraphs 5.3.7.2.3.1. and 5.5.4.2.6.5. to address highway-like road operation and withholding of HORs; insert new paragraph 4.2.5.2.16. to Annex 4. specifying testing for longitudinally moving bicycle targets; amend Annex 1. to add items 6.4. and 6.4.1. regarding withholding of HORs; and insert new paragraph 16.2.3. establishing that as from 1 September 2029 Contracting Parties shall not be obliged to accept type approvals issued to the preceding series of amendments for systems capable of withholding HORs on highway-like roads.

For the purposes of type approval under any UN Regulation requiring the verification of the timing of a system intervention, manufacturers shall provide to the approval authority or its designated technical service information on the method by which the initiation of any system intervention can be objectively identified and retrieved, including specific flags, status bits, event codes on in-vehicle networks, or visual indications on screens; clear instructions and all necessary tools for the Technical Service to extract, access and interpret the signal identifying the initiation; documented procedures including corresponding data sources, resolution, and timing accuracy appended to the type approval test report; and, where a visual indication displayed on a screen is used, documented latency between the earliest internal point at which the system initiates the function and the moment the visual indication becomes visible on the screen, expressed as a fixed value with associated uncertainty, with the documented latency value used to correct the observed timing of the screen indication appended to the type approval test report.

Proposal to amend para. 5.3.3.2. to clarify that steering shall remain possible with performance laid down in para. 6. for the intact steering system in case of control transmission failure, amend para. 6.1.1. to specify that tests shall be conducted on a level surface affording good adhesion at ambient temperature between 0°C and 45°C, with provisions for deviating conditions at manufacturer request with Technical Service agreement, and insert new para. 6.2.5.1.1. to permit vehicle manufacturers to request at least 10 “figure of eight” manoeuvres with 40 m diameter loops at 10 km/h speed prior to measurement of steering efforts with steering equipment failure.

Proposal to amend para. 5.3. to require that the effectiveness of ELKS shall not be adversely affected by magnetic or electrical fields, demonstrated by fulfilling the technical requirements and respecting the transitional provisions of the 06 series of amendments to UN Regulation No. 10.

Amends para. 5.3. to insert requirements that ELKS effectiveness shall not be adversely affected by magnetic or electrical fields, demonstrated through UN Regulation No. 10 (06 or later) series; para. 6.2.2.1. to require vehicle operating instructions include situations where ELKS is automatically deactivated; para. 6.5.2., 7.2.1., and 8.2.1. to reference UN Regulation No. 130 in its 01 series of amendments; para. 7.2.2.3. to insert “(the latest occurring warning)”; para. 8.3.3.1. to reference para. 6.6.2.1.; and inserts para. 14. establishing transitional provisions applicable from entry into force until 1 September 2030.

Proposal to amend GRVA/2026/16, based on GRVA-25-46. Insert new Introduction paragraph 17 regarding DCAS technology development and continuous review; amend paragraph 2.11. to define Target Lane; amend paragraph 5.3.5.1. to specify system boundary detection and feature transition requirements; amend paragraph 5.3.7.1.4. regarding steering support at boundary conditions; amend paragraph 5.3.7.2.1.1. to clarify driver disengagement detection timing; insert new paragraph 5.3.7.2.1.13. regarding manufacturer description of system behaviour during driver disengagement; amend paragraph 5.3.7.2.3.1. regarding driver confirmation time; amend paragraph 5.3.7.3.1. concerning risk mitigation function compliance; amend paragraph 5.3.7.5.1.1.2. regarding headway configuration notification; insert footnote 3 defining initiation of powertrain; amend paragraph 5.5.3.1. to clarify system off mode default status; amend paragraph 5.5.4.1.1. removing reference to system-initiated manoeuvres; amend paragraph 5.5.4.2.2.3. regarding warning escalation strategy; amend paragraphs 5.5.4.2.5.2. and 5.5.4.2.5.2.1. regarding visual disengagement assessment; amend paragraphs 5.5.4.2.7. and 5.5.4.2.7.1. regarding disengagement detection strategies; amend paragraph 5.5.4.2.8.1. regarding system activation disabling; amend paragraph 6.2.4.1. regarding approaching vehicle deceleration at speeds up to 60 km/h; amend paragraph 14.2. regarding production discontinuation; delete Annex 3 paragraphs 2.15. and 2.16. defining Highway and Non-Highway roads; amend Annex 3 paragraph 3.1.1. regarding documentation package retention; renumber Annex 3 paragraph 3.5.7. to 3.4.5. and insert new paragraph 3.4.5. regarding system information strategy; insert new paragraph 3.5.5. regarding safety management processes during operation phase; renumber former paragraphs 3.5.5. and 3.5.6. to 3.5.6. and 3.5.7. respectively; insert Annex 3 Appendix 2 with new definitions section; amend Annex 4 Introduction regarding test requirements and extended tests; amend paragraph 4.2.2.1. regarding longitudinal control distance; insert new paragraph 4.2.2.2. regarding non-repeatable outcomes; amend paragraphs 4.2.5.2.8.1.2., 4.2.5.2.10.1.1., and 4.2.5.2.12.1.1. regarding bicycle target specifications; delete paragraph 4.2.5.2.14.1.2.; amend paragraph 4.2.5.2.14.2.1. regarding test execution requirements; and amend Annex 5 paragraphs 3.4.8.2. and 3.5.5.1. regarding M&S data and simulation tool criticality assessment.

Proposal to:

• Amend Introduction para. 17 to clarify DCAS development based on current technology and data
• Amend para. 2.11 to delete “the” before “travel”
• Insert new para. 2.28.1. defining “Highway-like road” with characteristics including at least two lanes, designated speed limit of at least 80 km/h, physical separation dividing opposite traffic, and absence of at-grade pedestrian crossings, rail crossings, or road intersections
• Amend para. 5.3.5.1 to specify system shall leave active mode with exception of driver unavailability response
• Amend para. 5.3.7.1.4 to delete “the” before “front tyre”
• Amend para. 5.3.7.2.1.1 to change “detected” to “deemed” and specify disengagement duration of more than 2s
• Insert new para. 5.3.7.2.1.13 requiring manufacturer to describe system behaviour if driver detected disengaged during manoeuvre
• Amend para. 5.3.7.2.3.1 to delete requirements reference and require sufficient time for driver confirmation
• Amend para. 5.3.7.2.5.3.1 to add “or highway-like road” to highway operation requirements
• Delete para. 5.3.7.2.4.3 and renumber paras. 5.3.7.2.4.4 to 5.3.7.2.4.11 as 5.3.7.2.4.3 to 5.3.7.2.4.10
• Amend para. 5.3.7.3.1 to reference systems driver unavailability response and RMF requirements of 04 series UN R79
• Amend para. 5.3.7.3.3 to specify system capable of lane changes during driver unavailability response in compliance with RMF requirements
• Amend para. 5.5.4.2.2.3 to renumber and require warning strategies prioritize simultaneously activated emergency assistance systems
• Amend paras. 5.5.4.2.5.2 and 5.5.4.2.5.2.1 to specify visual disengagement criteria, dashboard consideration limited to 3 seconds, and visual re-engagement duration of at least 200 milliseconds
• Amend para. 5.5.4.2.6.5 to allow HOR withholding on highway-like roads at speeds up to 130 km/h and require verification of road characteristics for at least 500 m or 30 seconds, demonstration of safe cyclist operation, and HOR at least 7s before end of highway-like road
• Amend paras. 5.5.4.2.7 and 5.5.4.2.7.1 to add assessment of gaze direction changes and insert new para. 5.5.4.2.7.1
• Amend para. 6.2.4.1 to permit deviation from assessment at speeds up to 60 km/h with manufacturer explanation to Type Approval Authority
• Amend para. 14.2 to change “definitely” to “definitively”
• Amend Annex 1 to add para. 6.4.1 for system capability of withholding HORs on highway-like roads
• Delete Annex 3 paras. 2.15 and 2.16 defining “Highway” and “Non-Highway”
• Amend Annex 3 para. 3.1.1 to change “definitely” to “definitively”
• Renumber Annex 3 para. 3.5.7 to 3.4.5 and amend to require system information strategy

This document consolidates amendments to WP.29/2026/86 by GRVA/2026/14, GRVA-25-46, and GRVA-25-51. It proposes to amend para. 5.5.4.2.8.2., renumber reference to para. 5.3.7.2.1.1.1. to 5.3.7.2.4.10., amend paras. 5.3.7.2.4.2., 5.3.7.2.5.3.1., 5.3.7.2.6.1., 6.4.2., and 7.2.3.1., replace “definitely” with “definitively” in para. 14.2. and Annex 3 paras. 3.1.1.a and 3.1.1.b, insert new para. 16.2.3. effective 1 September 2029, amend Annex 1 para. 6.4., renumber reference in Annex 3 para. 3.5.7., amend Annex 3 Appendix 2 para. 2.3.2., amend text in Annex 4 diagrams at paras. 4.2.5.2.8.1.2., 4.2.5.2.10.1.1., 4.2.5.2.12.1.1., 4.2.5.2.16.1.3., and 4.2.5.2.20.1.3., delete second diagram in para. 4.2.5.2.14.1.2., amend paras. 4.2.5.2.14.2.1. and 4.2.5.2.19.2.1., and delete words in para. 4.2.5.2.19.1.1.