Revised proposal from GRE (for the March 2019 WP.29 session) to introduce transitional provisions for the phasing out of UN R27 in conjunction with the introduction of the new UN Regulation on Retro-Reflecting Devices (RRD).

Proposed transitional provisions to end further development of current UN lighting regulations in favor of the new UN Regulations on light-signalling devices (LSD), road illumination devices (RID), and retro-reflecting devices (RRD) developed under the Simplification of Lighting Regulations (SLR) program.

Request to GRE and the SLR informal group to give consideration to transitional provisions.

SLR informal group removing the brackets around (i.e., confirming) the 24-month transition period for the switch to approvals only under the new LSD, RRD, and RID regulations and to delete the proposal that approvals and extensions of approvals granted under each regulation would remain valid indefinitely.

Proposal from GRE to introduce transitional provisions for the phasing out of UN R27 in conjunction with the introduction of the new UN Regulation on Retro-Reflecting Devices (RRD).

Proposal to a) improve the transitional provisions presented in GRE/2018/11 with regard to the collective
amendments to Regulations Nos. 3, 4, 6, 7, 19, 23, 27, 38, 50, 69, 70, 77, 87, 91, 98, 104, 112, 113, 119 and 123 and b) introduce new requirements into the 06 series of amendments to UN R48 with regard to the validity and installation of type approved lighting and light-signalling devices.

Proposal from the Simplification of Lighting Regulations informal group to introduce transitional provisions for the phasing out of the existing Regulations on lighting and light-signalling in conjunction with the introduction of three new simplified Regulations on Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD).

SLR informal group draft for the proposal of a new regulation consolidating all current regulations regarding retro-reflecting devices. This draft UN Regulation combines the provisions of the current Regulations Nos. 3, 27, 69, 70 and 104.

Proposal from the Simplification of Lighting Regulations informal group to introduce transitional provisions for the phasing out of the existing Regulations on lighting and light-signalling in conjunction with the introduction of three new simplified Regulations on Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD).

Proposal as sent by the SLR informal group to GRE for its October 2017 session for transitional provisions for the phasing out of the current lighting regulations (in terms of continued development and granting of new type approvals) in favor of the new lighting device and related regulations.

Collective amendment working draft to introduce the transitional provisions for the switch from the current lighting regulations to the new simplified lighting regulations (light-signalling, retro-reflective devices, and road illumination devices). The draft proposal would allow 24 months from the entry into effect of the new regulations.

Proposal to clarify the Conformity of Production requirements.

Compressed data package of three documents providing lists of proposals for amendments to lighting regulations within the context of plans for the restructuring of UN lighting regulations.

Updated paper on the grouping of lighting regulations under one of three new regulations as follows:
Light Signaling Devices incorporating Regulations 4, 6, 7, 23, 38, 50, 77, 87, and 91
Forward Lighting Devices incorporating Regulations 19, 98, 112, [ 113 ], 119, and 123
Retro-Reflective Devices incorporating Regulations 3, 27, 69, 70, and 104

Proposal to clarify the Conformity of Production requirements.

Proposal to update UN R27 in line with technological progress and performance-based methodologies. The main changes are: a) Revised provisions to combine color boundaries for the night time color, b) Replacement of Illuminant C with Illuminant D65 in the measurement of fluorescent materials, c) Alternative methods introduced for instrumental measurement of the fluorescent color, d) New Annex 10 to replace reference to ISO 105, e) Clarification of the wind test (Annex 5), f) Standardization of the test surface representing the road, g) Simplification of the test device for clearance to the ground in Annex 3, h) Amendment of COP requirements, and i) 36-month transitional period in a new paragraph 14.

Diagrams further illustrating the corrections proposed in document GRE-70-25.

Editorial corrections to the GTB and CLEPA proposal to update UN R27 in line with technological progress and performance-based methodologies.

Corrections to the combined GTB and CLEPA proposal to update UN R27 in line with technological progress and performance-based methodologies.

Proposal to clarify the Conformity of Production requirements.

Combined GTB and CLEPA proposal, superseding documents GRE/2011/46 and GRE/2012/25, to update UN R27 in line with technological progress and performance-based methodologies. The main changes are:

a) Revised provisions to combine color boundaries for the night time color,
b) Replacement of Illuminant C with Illuminant D65 in the measurement of fluorescent materials,
c) Alternative methods introduced for instrumental measurement of the fluorescent color,
d) New Annex 10 to replace reference to ISO 105,
e) Clarification of the wind test (Annex 5),
f) Standardization of the test surface representing the road,
g) Simplification of the test device for clearance to the ground in Annex 3,
h) Amendment of COP requirements, and
i) 36-month transitional period in a new paragraph 14.

Proposal to update UN R27 in accordance with technological progress by establishing provisions for the use of fluorescent retro-reflective strip, enabling the consolidation of currently separate fluorescent (daytime) and retro-reflective (nighttime) striping.

Proposal to update UN R27 in accordance with technological progress by establishing provisions for the use of fluorescent retro-reflective strip, enabling the consolidation of currently separate fluorescent (daytime) and retro-reflective (nighttime) striping.

Proposal to clarify the definitions of type with regard to manufacturer, trade names and marks.