Version of the proposed 03 series of amendments to UN R51 based on GRB/2012/2 (consolidated version of the O3 series as agreed by GRB to date) but incorporating further improvements as proposed in GRB-54-05 and GRB-54-06 from the previous GRB session.

Version of the proposed 03 series of amendments to UN R51 that consolidates the latest changes agreed within GRB (GRB/2005/2/Rev.2, all “method B” amendments, including WP.29/2011/64, and the Additional Sound Emission Provisions (ASEP)).

The purpose of this proposal is to add transitional provisions to the 01 series of amendments to Regulation No. 101, to solve a discrepancy between the 06 series of amendments to Regulation No. 83 and the 01 series of amendments to Regulation No. 101.

This proposal would correct editorial errors detected in GTR 4 during the transposition of the GTR provisions into UN Regulation 49 (6 series of amendments).

This proposal was prepared by the experts from the International Organization of Motor Vehicle Manufacturers (OICA) in order to incorporate the content of Regulation (EU) 566/2011 into UN Regulation No. 83.06.

This document presents the position of OICA working groups on
WLTP mode construction. The proposal covers mode construction for conventional vehicles with options to be tested in Validation 2, including for electrified vehicles.

MS Word download: Working draft of the proposal that would be submitted to incorporate provisions for Rechargeable Energy Storage Systems into UN Regulation 100. This version based upon document GRSP-50-06.

Diagram and tables for use in Annex 8C of the proposed amendment to introduce provisions for Rechargeable Energy Storage Systems (REESS) into UN Regulation 100.

Draft text for Annex 4B (“Isolation Resistance Measurement Method for Component-based Tests of REESS”) of the proposed amendment to add provisions for Rechargeable Energy Storage Systems to UN Regulation 100.

Draft provisions concerning protections against overcurrent, overcharge, and overdischarge.

This submission from the International
Organization of Motor Vehicle Manufacturers (OICA) proposes to improve UN R107 provisions concerning the accessibility of pushchairs or prams in coaches and buses.

This proposal aims at providing a simple solution applicable to all automatic functions, avoiding the repetition for all automatic systems of the exercise initiated with document GRSG/2011/06 for headlamps.

This proposal would revise the transitional provisions of the proposed 03 series of amendments to Regulation No. 51 (see GRB/2012/2). OICA believes the preceding text may create problems in the granting or accepting of type approvals under the previous series.

Proposal of transitional provisions for the 03 series of UN R51 on vehicle noise. Importantly, the proposal seeks to address the handling of transitions and extensions between the 02 and 03 series, perhaps offering a template for transitional provisions in general.

Denmark submitted document GRRF-71-19 (subsequently integrated into GRRF/2012/12) proposing to narrow the compatibility bands for control line pressure versus brake rate. This document challenges the proposed changes as effectively mandating electronic braking and imposing unwarranted costs.

Denmark submitted Document GRRF-71-18 (subsequently integrated into GRRF/2012/12) proposing to narrow the limits for coupling force control systems which are allowed to override the compatibility bands. This document argues against the proposed changes.

Denmark submitted GRRF-71-19 (subsequently in GRRF/2012/12) proposing a new paragraph to require a test point between the coupling head and the trailer relay emergency valve. This document argues that the requirement is already implicit within UN R13 and therefore, that the change is unnecessary.

This document addresses the ramifications of introducing the proposals outlined in GRRF-72-07 (superceded by GRRF-72-07/Rev.1) specifically associated with semi-trailers.

OICA proposes alternate language for amendments to the text of Annex 21 governing the use of simulation tools for evaluating electronic vehicle stability control systems (EVSC).

Modified version of document GRRF/2011/35/Rev.1, pursuant to GRRF session 72 discussions, which aims to clarify reasonable levels of braking performance to be expected in different positions of the ignition key (i.e., off, on, lock, etc.).

Working draft of the proposed regulation for international whole vehicle type approvals.

Revisions proposed by OICA to the scope, objectives, and work plan of the informal group to further develop GTR No. 9.

Presentation concerning durability of the pedestrian lower legform tool under consideration for the GTR on pedestrian safety.

Proposed revisions to the chart of vehicle regulations that would apply under the International Whole Vehicle Type Approval system.

OICA proposal to add a ‘necessity evaluation’ to the decision tree being provided as to guide WP.29 working party reviews of the various regulations under consideration for the International Whole Vehicle Type Approval system.

Rationale for the proposal to develop a new UN Regulation on recyclability of M1 and N1 vehicles to be annexed to the 1958 Agreement.

Overview of the proposal for a regulation to establish an International Whole Vehicle Type Approval.

Proposal to improve the wording of the informal document GRE-67-08 submitted by France to align provisions in UN R48 with those of UN R121 with regard to the hazard warning telltale.

Proposal from OICA to further clarify the test conditions regarding the requirements for the sensitivity of the sensor system for ADB (automatic/adaptive driving beam).

OICA presentation raising numerous concerns with the Polish proposal (document GRE/2012/21) to introduce performance-based requirements for headlamp aiming/leveling and glare tolerances.

Comments and recommendations concerning the ‘extended HILS’ approach and application of the current worldwide heavy-duty vehicle emissions test cycle to hybrid vehicles.

Comments from OICA on the German proposal to reconcile views on conspicuity markings for commercial vehicles (document GRE-67-04).

Revised submission from the International Organization of Motor Vehicle Manufacturers proposing to incorporate the content of Regulation (EU) 566/2011 into the 06 series of amendments to UN Regulation No. 83, succeeding informal document GRPE-63-16 and replacing GRPE/2012/11.

Submission from the European Commission and OICA to amend the provisions of UN GTR No. 5 to clarify concerns identified during the preparation of legislation implementing the Euro VI emission levels (i.e. Regulation (EC) 595/2009), including a revision of the disablement conditions proposed in 2011.

Remarks and questions from OICA concerning the technical specifications (drawings) and procedures for the assembly, disassembly and inspection (user manual) of the Flex-PLI proposed for use in GTR 9.

Presentation on automaker experience in running tests with the Flex-PLI test tool (versions SN02, SN04, IND-Impactor).

Proposal to correct ISO references in document GRSG/2012/7 (Forum secretariat proposal to update international standard references in UN R67).

Proposed amendments to update UN R46 in view of technological advances to permit approval of interior rearview mirrors having no housing, holder, or frame.

Proposal to correct an ISO reference in document GRSG/2012/7 (Forum secretariat proposal to update international standard references in UN R67).

Proposal for revised transitional provisions. With fuel rails having been added to the Regulation, OICA submits that additional lead-time is needed to adapt the components and systems of current production to UN R110.

Text from the International Organization of Motor Vehicle Manufacturers (OICA) proposing to apply the ISO colour coding and hierarchy of alerts to danger to symbols 25 (brake system malfunction) and 28 (parking brake) of UN R121.

OICA and Euromot response to the informal group on REC request to submit a proposal on NOx control measures based on the Euro VI and Nonroad Stage IV NOx control provisions.

OICA cost assessments based on studies from EEVC and NHTSA.

Worldwide accident injury and fatality data pertinent to pole side impact protection as compiled by OICA.

OICA proposal for exemption of Category 2 vehicles from the pole side impact GTR.

Submission from OICA as a preliminary comment to the proposal from Germany to amend the Regulation No.58 (document GRSG-102-26).

Revised proposal to correct ISO references in document GRSG/2012/7 (Forum secretariat proposal to update international standard references in UN R67).

Revised submission from OICA as a preliminary comment to the proposal from Germany to amend the Regulation No.58 (document GRSG-102-26).

OICA-proposed amendments to document GRRF/2012/2 (Proposal for Supplement 10 to the 11 series of amendments to Regulation No. 13).

This document proposes amending GTR No. 5 to clarify a number of concerns identified by the EC during the preparation of legislation implementing the Euro VI emission levels (i.e. Regulation (EC) 595/2009) and includes a revision of the disablement conditions proposed in 2011 for OBD systems.

Revised submission (succeeding informal document GRPE-63-08 and replacing GRPE/2012/8) from OICA to add transitional provisions to the 01 series of amendments to UN R101, to solve a discrepancy between the 06 series of amendments to UN R83 and the 01 series of amendments to UN R101.

Corrections to paragraph cross-references within GTR No.4 which were identified during transposition of the GTR into UN Regulation 49.

GRSP/2012/11 proposes to correct text for electric vehicles in UN Regulation Nos. 12, 94, 95 and 100, replacing the word “power train” with “occupants” in the referenced rules. This document replaces ‘registration’ with ‘approval’ in transition provisions in accordance with WP.29 guidelines.

GRSP/2012/12 is the proposed text of the new UN GTR on safety of hydrogen fuel cell vehicles. This proposal from OICA would retain the “barriers alternative” for post-crash electrical safety (in effect removing brackets that signify tentative language from the relevant text).

PowerPoint table concerning door locking status under the test procedures of UN R94.

Document GRSP/2012/7 proposes adapt the test procedures of UN R94 to take into account vehicles equipped with automatically activated door locking systems. This OICA proposal would allow for ‘mixed configuration’ of both locked and unlocked doors during testing.

Proposal to delete erroneous cross-references in text, making reference only the “adjusting system” which is defined in section 2 of the Regulation.

Document GRSP/2012/9 proposes to adapt the test procedure for UN Regulation No. 95 to include vehicles equipped with automatically activated door locking systems. This proposal would allow for “mixed configurations” of locked and unlocked doors in the test procedures.

PowerPoint slide concerning door lock status under UN R95 testing procedures.

The requirements for the airbag warning label were recently amended by Supplement 4 to the 01 series of amendments and by Supplement 1 to the 02 series of amendments to Regulation 94. It therefore appears necessary to align the corresponding prescriptions of Regulation 16.

OICA perspectives on the proposed electric vehicle safety global technical regulation.

OICA proposal to transpose EU Directive 2005/64/EC on the type-approval of motor vehicles with regard to their reusability, recyclability and recoverability and its amendment, Commission Directive 2009/1/EC, into international legislation.

Proposed amendments to Appendix 2 of Annex 21 to clarify the use of test reports for the validation of the simulation tool in order to avoid making test reports issued prior to entry into force of Supplement ¹⁰ to Series 11 of ECE R13 invalid.

Revision, integrating Netherlands and OICA input, of the EC submission intended to raise awareness of concerns over clarity and implications of proposed amendments related to the measuring points of the headform and lower legform test procedures and to ensure full support among Contracting Parties.

Document GRSP/2012/7 proposes adapt the test procedures of UN R94 to take into account vehicles equipped with automatically activated door locking systems. This OICA proposal, revised pursuant to GRSP-51 input, would allow for ‘mixed configuration’ of both locked and unlocked doors during testing.

Lastest version of the draft provisions concerning tire markings, addressing in particular both human and “Optical Character Recognition” legibility.

GRSP/2012/11 proposes to correct text for electric vehicles in UN Regulation Nos. 12, 94, 95 and 100, replacing the word “power train” with “occupants” in the referenced rules. This document replaces ‘registration’ with ‘approval’ in transition provisions in accordance with WP.29 guidelines.

OICA/CLEPA presentation supporting the use a of head-restraint measuring device (HRMD) to enhance GTR 7 test procedures.

Consolidated version of the proposed 03 series of amendments to UN R51, including OICA remarks on updating references to Annex 9 and concerning the Annex 2 qualification of the vehicle to be tested in each instance.

OICA perspectives on potential benefits to various types of users, including vehicle manufacturers and their component suppliers, that might justify the eventual costs of the proposed DETA system.

OICA perspectives on permissions that should be given to different types of users of the proposed DETA system to create, read, write, edit, and destroy type approval files.

CLEPA and OICA proposal to harmonize Regulations Nos. 13 and 13-H with the Federal Motor Vehicle Safety Standard FMVSS 135 on electric vehicle requirements with regard to the regenerative braking system (RBS).

OICA submission proposing to align the current stationary vehicle noise emission measurement provisions of UN R51 with those in the latest draft international standard ISO/DIS 362.

Proposal from OICA to amend UN R46 in order to permit approvals of new generation “frameless” interior mirrors having no housing or holder. The current language assumes all mirrors are enclosed in housings and therefore excludes approval testing of these new-techology mirrors.

Submission by OICA in order to transpose into international legislation Directive 2005/64/EC and Directive 2009/1/EC concerning the type-approval of motor vehicles with regard to their reusability, recyclability and recoverability.

Editorial corrections to Annex 12 of the Regulation, adding the missing paragraph number 10.3.1.1., moving the formula under paragraph 10.4. to its correct placement under paragraph 10.3.1.2., changing the reference to “paragraphs 3. to 10.” to read “3. to 9.” under paragraph 6.1.3., item 7.

Table prepared by OICA highlighting various elements in the consideration of noise in UN Regulation Nos. 9, 28, 41, 51, 59, 63, 92, and 117.

Proposal from the International Organization of Vehicle Manufacturers (OICA) to extend the scope of UN R10 to all kinds of power train systems above a certain working voltage level when they are in charging mode and enable the type approval of separate electrical components (ESA).

Working paper proposing to revise the transitional provisions of UN R13-H based on a review undertaken pursuant to the discussions at the last GRRF session.

Presentation outlining parameters for the further development of the advanced emergency braking systems regulation in line with technological progress.

Text from the European Association of Automotive Suppliers (CLEPA) and from the International Organization of Motor Vehicle Manufacturers (OICA) to align the braking performance requirements for M1 vehicles in Annex 3 of UN R79 with those of UN R13-H (light vehicle braking).

Updated working paper (succeeding document GRRF-73-19) proposing to revise the transitional provisions of UN R13-H based on a review undertaken pursuant to the discussions at the last GRRF session.

Proposal to define the relief depth of tire markings and an editorial correction concerning the permissible tire marking fonts.

Update of the presentation outlining parameters for the further development of the advanced emergency braking systems regulation in line with technological progress.

Proposal from the International Organization of Motor Vehicle Manufacturers (OICA) to include requirements for automatic door locking systems. This OICA proposal would allow for ‘mixed configuration’ of both locked and unlocked doors during testing.

Proposal from the International Organization of Motor Vehicle Manufacturers (OICA) to include requirements for automatic door locking systems. This proposal would allow for “mixed configurations” of locked and unlocked doors in the test procedures.

Review of the IWVTA program, potential impact on UN Regulations, and request for Working Party (GR) support in reviewing and adapting, where warranted, the regulations being integrated into the proposed IWVTA system.

WP.29 voted to align UN Regulation procedures with the EU Whole Vehicle Approval Directive 2007/46/EC. This document proposes revisions to regulations under the purview of GRSG per the revised UN Regulatory Procedures and Transitional Provisions (document WP.29/1044/Rev.1).

During the 64th GRE session, GTB was charged to review and update the transitional provisions of Regulation 48. This draft proposal has been developed by the GTB Installation Working Group in close cooperation with OICA.

Document WP.29/2012/87 is a GRSG proposal (04 series of amendments) to reduce the blind spot on the passenger side of N2 and N3 (medium/heavy commercial) vehicles under UN R46. This new proposal would clarify that prior approvals not impacted by the 04 series amendments remain valid.

OICA contributions to the development of the heavy-duty hybrids amendment to GTR No. 4 (Worldwide Heavy-Duty Vehicle Emissions Certification Procedure).

Overview of proposed system to permit whole vehicle type approvals among countries (Contracting Parties) with different requirements.

Proposals from OICA to revise elements of the draft guidelines on design principles for automated driver assistance systems (ADAS).

Document GRE-68-02 from the Working Party “Brussels 1952” (GTB) proposes to amend the geometric visibility provisions of multiple lighting regulations. Since manufacturers have already developed lighting in line with the current definitions, OICA seeks a 48-month transition period.

Document GRE/2012/29 proposes to clarify the requirements for the mandatory manual override of the automatic/adaptive driving beam (ADB) function. While agreeing with the sub-menu prohibition, OICA proposes to delete the prohibition on “multi-step operations” so as not to restrict future designs.

Document GRE/2012/44 would extend the scope of UN R10 to all kinds of power train systems above a certain working voltage level when they are in charging mode and enable the type approval of separate electrical components (ESA). OICA corrects and clarifies several points from the earlier proposal.

Overview of document GRE/2012/44 (proposal for the 05 series of amendments of UN R10) which would extend the scope of UN R10 to all kinds of power train systems above a certain working voltage level when they are in charging mode and enable the type approval of separate electrical components (ESA).

OICA presentation on document GRE/2012/27, a proposal for Supplement 3 to the 05 series of amendments to UN R48 from Poland to replace the artificial 2,000 lm borderline and LED automatic leveling requirements with performance-based distance and glare criteria for headlamps.

Document GRE/2012/28 is a proposal from the Netherlands and the United Kingdom to further clarify the test conditions for the requirements on the sensitivity of the sensor system for automatic/adaptive driving beam. This OICA document notes that the presence of position lamps is optional.

Document GRE-68-04 is a proposal to insert provisions for the use of light source control gear in the case of halogen incandescent light sources. This proposal deletes limits on the main passing beam and responds to concerns raised by IEC in document GRE-67-30.

PowerPoint presentation reviewing the OICA proposal for the structure of the draft GTR for electric vehicle safety.

Revised OICA presentation on document GRE/2012/27, a proposal for Supplement 3 to the 05 series of amendments to UN R48 from Poland to replace the artificial 2,000 lm borderline and LED automatic leveling requirements with performance-based distance and glare criteria for headlamps.

OICA comments on the draft proposal to amend UN R13 to enable the alternative method for the assessment of electronic vehicle stability control systems.

Proposal to clarify that coupling systems of the battery-charging system (i.e., rechargeable energy storage system, REESS) which are not energized during driving need not meet the requirements established for systems designed to be energized during driving (and thus significant in case of accident).

Proposed revisions to document WP.29-157-06 on guidelines for advanced driver-assist systems, particularly with regard to human interaction with multiple warning and counter-measure systems.

OICA-submitted working draft of the international whole vehicle type approval regulation.

Preliminary consolidated drafting proposals prepared by OICA for the revised 1958 Agreement pursuant to the proposed International Whole Vehicle Type Approval system.

Proposal to transpose the front and rear ride heights and vehicle attitude tolerances from the repealed 2004/90/EC into GTR No. 9 preamble and proposal for supplement 1 of UN-R127

Initial comments of OICA representatives to the 5th GTR9-Phase 2 informal group meeting in response to the BASt presentation on the verification of Draft FlexPLI prototype impactor limits and application to FlexPLI serial production level.

Superseding document GRSP-51-14, the proposal aligns UN R16 with UN R94 (frontal collision) with regard to airbag warning labels. The proposal addresses distinctions between front passenger airbags and other types of airbags (such as lateral).

Summary of the work behind the development of the proposed global technical regulation on hydrogen vehicle safety.

Proposal to correct an ISOFIX definition as referring to the “ISOFIX position” and to clarify that the driver’s seat would not be required to be fitted with ISOFIX anchorages regardless of the vehicle seat configuration.

Suggested changes to the proposal to amend Annex 4 (market fuel quality) of the Consolidated Resolution RE3