Proposal also for a corrigendum 1 to the 04 series of amendments and a
corrigendum 1 to the 5 series of amendments

Proposal to introduce provisions on thermal propagation as a result of a single cell thermal runaway.

Proposal aims to correct and clarify the text of the regulation, and to modify the current wording which creates misunderstandings and a non-harmonized application of the regulation by technical services. proposal for supplement 1 to the 10 series of amendments, supplement 2 to the 11 series of amendments and supplement 1 to the 12 series of amendments

Proposal to clarify that the number of cycles for initial pressure cycle life in the testing procedure in Annex 3 is 11,000 cycles.

Proposal to correct inconsistencies following the amendment of regulation 100 by vehicles of category O

Proposal to amend para. 9.(a) to clarify expansion of the protection scope of electrical and battery safety, including thermal propagation in cases of V2X, parking, and charging. The modification addresses new vehicle functionalities like V2X, defined in UN GTR No. 22, where traction batteries cover external power and energy demand. Additional requirements must be added, including isolation resistance requirements for coupling systems for charging the REESS, as defined in para. 5.1.1.2.4.4. of UN GTR No. 20.

Text prepared by Italy and France in order to align the UNECE Regulation No. 17 with the corresponding European Directive 2005/39/EC.

Proposal to extend the scope to all kinds of powertrain systems above a certain working voltage level. The modifications are based on discussions held during the meeting of the group of interested experts on Electric Vehicles Post Crash provisions (EVPC) to amend regulation Regulations Nos. 94 and 95.

Proposal from the France on behalf of the Technical Services Group (TSG) on UN Regulation No. 44. It aims to clarify the lap strap interaction with the dummy and its assessment as well as improving the overturning test procedure in light of recent findings.

Proposal from the France, on behalf of the Technical Services Group (TSG), to clarify the definition of submarining as used in Regulation No. 44.

Text prepared by France to introduce all the modifications suggested by the experts of the informal working group on child restraint
systems.

In response to a GRSP request (ECE/TRANS/WP29/GRSP/53, para. 45) concerning the configuration of Child Restraint Systems (CRS) combining a base attached to the vehicle by ISOFIX anchorages with a shell installed on the base. This shell could also be used without the base and secured by an adult safety belt. This proposal aims at allowing the type approval of this configuration according to UN Regulation No. 129 in its first phase.

Text to introduce all the modifications needed in UN Regulation No. 129 (enhanced child restraint systems (ECRS)) suggested by the experts of the informal working group on child restraint systems (IWG CRS) to extend the scope of this regulation to non-integral Child Restraint Systems (“Universal Booster” or “Specific to vehicle Booster”) (Phase 2 of the UN Regulation).

In parallel with the introduction of a new Regulation on a frontal impact with focus on the restraint system, this proposal would limit the chest deflection of the Hybrid III dummy to 42 mm (from the current 50 mm) in order to promote improved protection of older occupants.

Amendment to introduce all the modifications needed in UN Regulation No. 129 (Enhanced Child Restraint System (ECRS)) that were suggested by the experts of the informal working group on Child Restraint Systems (IWG CRS) to extend the scope of this Regulation to Non-Integral child restraint systems (“Universal Booster” or “Specific to vehicle Booster”) (Phase 2 of the UN Regulation).

Proposal as revised during the 55th GRSP session (superseding document GRSP/2014/06) incorporating changes to UN R94 in light of the development of the new regulation concerning protection in frontal collisions with focus on the restraint system, especially to improve the protection of older occupants.

Amendment to introduce all the modifications needed in UN Regulation No. 129 (Enhanced Child Restraint System (ECRS)) that were suggested by the experts of the informal working group on Child Restraint Systems (IWG CRS) to extend the scope of this Regulation to Non-Integral child restraint systems (“Universal Booster” or “Specific to vehicle Booster”) (Phase 2 of the UN Regulation).

Proposal to extend the scope of UN Regulation No. 129 to include non-Integral child restraint systems (“Universal Booster” or “Specific to vehicle Booster”) (Development Phase 2 of the UN Regulation).

Revised version of the proposal (formal document GRSP/2015/9 ) to extend the scope of UN Regulation No. 129 to include non-Integral child restraint systems (“Universal Booster” or “Specific to vehicle Booster”). This version includes all corrections to the text made by the Informal Working Group on Child Restraint Systems through its September session. (The CRS informal group will discuss this version during its October session.)

Proposal to clarify the texts related to the recently expanded height requirements for the effective upper belt anchorage (Supplement 4 to the 07 series of amendments to Regulation No. 14).

Proposal to introduce phase 2 amendments related to the booster seat category (booster seat with backrest) into UN R129. The text includes all modifications proposed by GRSP up to and including its 57th session (Geneva, 18–22 May 2015) as well as those of the IWG CRS up to and including its 53rd session (London, 2 September 2015). The proposal builds on the original UN Regulation No. 129, Corrigendum 1, Supplements 1, 2, 3 and 4 as well as the draft 01 series of amendments to the UN Regulation (ECE/TRANS/WP.29/GRSP/2015/24) Phase 1.

Proposal to limit the use of a booster cushion (booster seat without backrest) with children of a stature greater than 125 cm and the application for type approval of such CRS only in mass Group III for children of mass from 22 kg to 36 kg. The proposal is submitted on behalf of the CRS informal working group.

Proposal to require seat-belt reminders for all seating positions, including rear positions, and to clarify the scope of the regulation.

Proposal from the CRS informal group to introduce phase 2 amendments regarding the approval of booster-seat CRS category (booster seat with backrest) into UN R129.

Proposal to align the provisions on toxicity and flammability of materials used to manufacture Child Restraint Systems (CRS) and to update test provisions of UN Regulation introduced by the Supplement 1 to the 01 series of amendments to UN Regulation No. 129. It is based on ECE/TRANS/WP.29/2016/106, adopted at fifty-ninth session of the Working Party on Passive Safety (GRSP) and modifies ECE/TRANS/WP.29/2016/107 (02 series of amendments to the UN Regulation).

Proposal to align UN R14 with recent changes to UN R16 on occupant restraint systems. Two “Booster Seat” fixtures (ISO/B2 and ISO/B3) were added to UN R16 to coincide with the implementation of Phase 2 of UN R129 (enhanced child restraint systems). These fixtures were developed within ISO/TC 22/SC 36/WG 2 (Child Restraint Systems) and follow the principle already established in Regulations 16 and 129 to ensure child restraint to car compatibility. An additional “Reduced-Size Rearward Facing toddler CRS” fixture (ISO/R2x) was added to facilitate compatibility in small cars/seating positions. The ISO/B2 booster seat fixture was added in the i-Size concept. Lateral facing fixtures (ISO/L1 and ISO/L2) have been upgraded.

Proposal to add new CRS fixtures and otherwise align UN R16 with changes introduced through UN R129 (enhanced child restraint systems). Two “Booster Seat” fixtures (ISO/B2 and ISO/B3) were added to UN R16 to coincide with the implementation of Phase 2 of UN R129. These fixtures were developed within ISO/TC 22/SC 36/WG 2 (Child Restraint Systems) and follow the principle already established in Regulations 16 and 129 to ensure child restraint to car compatibility. An additional “Reduced-Size Rearward Facing toddler CRS” fixture (ISO/R2x) was added to facilitate compatibility in small cars/seating positions. The ISO/B2 booster seat fixture was added in the i-Size concept. Lateral facing fixtures (ISO/L1 and ISO/L2) have been upgraded.

Proposal from the CRS informal group to clarify and improve the text of the 01 series of amendments.

Proposal from the CRS informal group to clarify requirements and improve the text of the 02 series of amendments, including strap positioning provisions and labeling requirements for detachable child seat impact shields.

Proposal to update the 07 series of amendments in line with UN R129 and changes to the 06 series (Supplements 8 and 9). Two “Booster Seat” fixtures (ISO/B2 and ISO/B3) were added to UN R16 to coincide with the implementation of Phase 2 of UN Regulation No. 129. These fixtures were developed within ISO/TC 22/SC 36/WG 2 (Child Restraint Systems) and follow the principle already established in Regulations 16 and 129 to ensure child restraint to car compatibility. An additional “Reduced-Size Rearward Facing toddler CRS” fixture (ISO/R2x) was added to facilitate compatibility in small cars/seating positions. The ISO/B2 booster seat fixture was added in the i-Size concept. Lateral facing fixtures (ISO/L1 and ISO/L2) have been upgraded.

Proposal of amendments developed by the CRS informal working group to enable the type approval of integral and non-integral Enhanced Child Restraint Systems equipped with an impact shield.

Proposal of amendments developed by the CRS informal group to enable the type approval of integral and non-integral Enhanced Child Restraint Systems equipped with an impact shield.

1. The proposed amendment includes Enhanced Child Restraint Systems from the universal belted or specific to vehicle belted categories into the scope of UN Regulation No. 129. This represents Phase 3 of the UN Regulation.
2. The text includes all modifications proposed by GRSP up to and including its sixtieth session (13-16 December 2016) as well as those of the Informal Working Group on Child Restraint Systems up to and including its sixty-third session (Brussels, 25th January 2017).
3. This proposal refers to the original text of Regulation No. 129, including the following amendments:
   • Corrigendum 1,
   • Supplement 1,
   • Supplement 2,
   • Supplement 3,
   • Supplement 4,
   • the 01 series of amendments,
   • Supplement 1 to the 01 series of amendments,
   • the 02 series of amendments,
   • Supplement 1 to the 02 series of amendments (GRSP/2016/19 and 23 amended by GRSP-60-08-Rev.1),
   • Supplement 2 to the 01 series of amendments (GRSP/2016/22 amended by GRSP-60-09-Rev.2).

Proposal to clarify that the second level warning requirement in the 02 series of amendments to the UN R16 is dependent upon the needs of each seating position. A strict reading of paragraph 2.45. would require a second-level warning in the event of any unfastened seat-belt in a front or rear position. This proposal would clarify that the second-level warning is required depending on the individual position requirement (e.g., based on detection that a position is occupied).

Proposal to delete a reference to the “Y” symbol denoting a crotch strap. The Y symbol is no longer used in UN R129 and the presence of this reference has caused problems in interpretation of requirements.

Proposal to specify the proper use and behavior of an adult safety-belt used to install a non-integral Enhanced CRS during dynamic tests. These instructions are present in UN R44, but not in UN R129. Therefore, this proposal would align the two regulations.

Proposal to allow for the use of electronic means (QR code, smartphone software application, etc.) in furnishing the consumer with the list of vehicle applications of a CRS.

Proposal to allow for the use of electronic means (QR code, smartphone software application, etc.) in furnishing the consumer with the list of vehicle applications of a CRS.

Proposal to allow for the use of electronic means (QR code, smartphone software application, etc.) in furnishing the consumer with the list of vehicle applications of a CRS.

Proposal to allow for the use of electronic means (QR code, smartphone software application, etc.) in furnishing the consumer with the list of vehicle applications of a CRS.

Proposal on behalf of the Technical Services Group (TSG) on UN Regulation No. 129 to delete the requirement for chest deflection and abdominal pressure data under the dynamic tests. These criteria were not required in this (original or 00 series) version of UN R129.

Proposal on behalf of the Technical Services Group (TSG) on UN Regulation No. 129 to clarify that the opening force applied to the ISOFIX attachments of a complete seat or of a seat component under the test protocol is 50 ± 1 N.