EVS informal working group updated version of the consolidated draft with latest amendments agreed within the group.

Latest amendments to the draft as agreed within the informal working group on Electric Vehicle Safety.

Proposal to correct the reference to paragraph 5.1.3. in paragraph 5.2.3.2. to read 5.2.3.

Proposal to clarify provisions concerning the second-level warning for seat-belt reminders, especially with regard to rear seat positions.

Proposal to clarify the text of UN R14. The current text has produced differing interpretations among Technical Services with regard to which requirements apply to central seating positions in rear rows of category M₁ and N₁ vehicles and the minimum distance between two effective lower belt anchorages (L1 and L2). The proposed amendment clarifies that rear seat rows can only have one central seating position with a reduced minimum distance of 240 mm. Rear seat rows with an even number of seats shall always have a distance of at least 350 mm.

Proposal to introduce installation specifications for securing a cab mounted on a vehicle to the test rig for tests B and C, as is currently provided for test A, under UN R29. This proposal aims to improve repeatability and reproducibility while allowing more flexibility in permitting the use of rigid composite blocks and/or (adjustable) metal brackets in securing the vehicle in the place of the wooden block presently prescribed in Figure 1.

Proposal to clarify the conditions where a door is deemed to be open under UN R95. Technical Services have interpreted the definition of “open” under paragraph 5.3.1. differently, resulting in divergent outcomes. The proposed definitions are taken from UN Regulation No. 135 Revision 1.

Proposal to consolidate provisions concerning ISOFIX top tether anchorages and i-Size seating positions removed from Regulation No. 14 in a new regulation. This change removes obstacles to the inclusion of UN R14 into Annex 4 of the future UN Regulation No. 0 of the International Whole Vehicle Type Approval (IWVTA). This document revises the working document GRSP/2017/7.

Presentation concerning plans to address the safety of low speed, low mass vehicles (L7 quadricycles, light electric vehicles).

Proposal to eliminate divergent interpretations of paragraph 6.4. with regard to the testing for head restraint performance of a bench seat with three seating positions and two head restraints. Under this condition, the proposal would require application of a moment of 3 × 373 Nm to the back of the seats and of 2 × 373 Nm to the head restraints. The manufacturer may request to apply 53 daNm to each seat back without head restraint and 89 daNm to each head restraint in order to comply with the requirements of paragraph 6.2. on the strength of the seat back during this test. If the manufacturer does not opt to apply these forces, then the test procedure specified in paragraph 6.2. must be carried out in addition to the head restraint testing under paragraph 6.4.

In order to facilitate the establishment of an International Whole Vehicle Type Approval, provisions concerning requirements for child restraint systems are being extracted from UN R14 into a new regulation. Therefore, this proposal would update the references to UN R14 in UN R129 to enable recognition of anchorage approvals under the adult safety belt regulation (UN R14 as amended) and the new child restraint anchorage regulation.

Presentation of the phase 1, phase 2, and phase 3 amendments to UN R129 on child restraint systems. The presentation corresponds respectively to documents GRSP/2017/15 (superseded by GRSP-61-15), GRSP/2017/16 (superseded by GRSP-61-16), and GRSP/2017/17 (superseded by GRSP-61-17).

Proposal to harmonize airbag warning labels regarding the correct use of a child restraint system in a seating position equipped with an activated frontal airbag in order to prohibit the display of additional information unrelated to child safety.

Notice on Netherland’s sponsored research into head protection for pedal-electric bicycle riders and subsequent technical agreement on helmet testing.

Improved explanations for the proposal to clarify the requirements for CRS utilizing the seat belt lap strap in order to ensure correct installation and testing and to avoid possibly dangerous misinterpretation to the test configuration.

Updated proposal from the CRS informal working group, superseding document GRSP/2017/15, to enable the type approval of integral and non-integral Enhanced Child Restraint Systems equipped with an impact shield.

Updated proposal from the CRS informal working group, superseding document GRSP/2017/16, to enable the type approval of integral and non-integral Enhanced Child Restraint Systems equipped with an impact shield.

Updated proposal from the CRS informal working group, superseding document GRSP/2017/17.

1. The proposed amendment includes Enhanced Child Restraint Systems from the universal belted or specific to vehicle belted categories into the scope of UN Regulation No. 129. This represents Phase 3 of the UN Regulation.
2. This proposal refers to the original text of Regulation No. 129, including the following amendments:
   • Corrigendum 1,
   • Supplement 1,
   • Supplement 2,
   • Supplement 3,
   • Supplement 4,
   • the 01 series of amendments,
   • Supplement 1 to the 01 series of amendments,
   • the 02 series of amendments,
   • Supplement 1 to the 02 series of amendments (GRSP/2016/19 and 23 amended by GRSP-60-08-Rev.1),
   • Supplement 2 to the 01 series of amendments (GRSP/2016/22 amended by GRSP-60-09-Rev.2).

Proposal to clarify that seat belt components such as retractors shall not sustain damage during testing according to Annex 9 of UN R17. Presently, these components have occasionally been damaged during testing such that their functionality has been impaired. In order to ensure adequate occupant safety, this proposal would require all safety-belt components to be included in the test installation, clarifies that such damage is not acceptable, and requires post-test inspection.