Text prepared by the European Association of Automotive Suppliers (CLEPA) to enable the approval of an OEM engine control unit on a CNG/LNG vehicle during the vehicle type approval process, eliminating the need for a separate type approval of the ECU as is the current requirement.

Text prepared by CLEPA to introduce a prohibition on any flow of a gaseous fuel into a diesel/gasoline reservoir and limiting the flow of diesel/gasoline into a gaseous fuel tank in bi-fuel vehicles.

Text prepared by the European Association of Automotive Suppliers (CLEPA) to introduce into Regulations Nos. 67 and 110 type approval provisions for “valve control at stop-start”. This proposal allows the tank valves to stay open in an active stop-start phase for CNG/LPG with stop-start engines.

Proposal for additional sound emission provisions (ASEP) to align UN R59 with parallel amendments to the main vehicle noise regulation, UN R51.

The UN R13 and 13-H include procedures to filter out the effects of electric regenerative braking systems from the braking assessment. This proposal would allow test services to disconnect to RBS prior to running tests. It also would allow the use of DC Ampere-hour meter to measure charge states.

This paper presents some of the main questions and positions of OICA regarding the Japanese proposal on lane-keeping and parking-assist systems. In general, OICA is not in favor of new regulations for LKAS and PAS.

E-mail (Outlook .msg format) to the REC secretariat conveying the outcomes of a CLEPA/OICA agreement on a amendments to the draft of the proposed REC regulation.

Proposed amendments to the proposed revisions to the 1958 Agreement pursuant to the international whole vehicle type approval project.

Overview of the “dilemma” presented by prohibition of dual approvals under UN Regulation 44 and i-size CRS.

Working draft of the text to introduce type approval provisions of fuel selection system.

Draft text to introduce type approval provisions for “valve control at stop-start”.

Review of open issues concerning ISOFIX child restraint systems.

Clarification to affirm CLEPA’s understanding that the proposed new numbering system applies only to the numbering of type approval certificates and not to the approval mark to be put on each approved components.

Text prepared by the European Association of Automotive Suppliers (CLEPA) to introduce Additional Sound Emission Provisions (ASEP) into the UN R59.

Proposal for collective amendments of amendments to Regulations Nos. 13 (Heavy vehicle braking), 13-H (Brakes of M1 and N1 vehicles), 79 (Steering equipment) and 89 (Speed limitation devices) and the new Regulations on LDWS and AEBS to clarify the references to Regulation No. 10 into the UN Regulations mentioned above.

OICA positions opposed to the Japanese proposal for new regulations to govern lane-keeping assist systems and parking assist system, arguing that such systems are already covered under UN Regulation 79.

Correction to ISO reference since Byte 3-4 of EBS 11 is only referenced in Part 2 of ISO 11992 and therefore the text should make explicit that reference along with amendment 1:2007. Also proposes to omit several redundant footnotes and references.

Proposal to introduce type-approval provisions for fuel selection systems into the regulation on compressed natural gas-powered vehicles.

Proposal to introduce type-approval provisions for “valve control at stop-start” into the regulation on LPG equipment. The proposal would allow tank valves stay open in a commanded stop-start phase as it is the case for the idling phase of non-stop-start vehicles. These provisions are similar to those for UN R110 on CNG vehicles.

Proposal to introduce type approval provisions for “valve control at stop-start”. The proposal would let the tank valves stay open in a commanded stop-start phase as is the case for the idling phase of vehicles not equipped with start-stop systems. These provisions are similar to those proposed for UN Regulation No. 67

Proposal to introduce a new Class F marking designed with chevron-type pattern to be applied to special utility vehicles or trailers not normally covered by standard contour marking materials in order to harmonize national requirements making use of such markings.

Proposal to introduce new Class 5 devices made solely of retro-reflective plates with chevron type pattern to be applied to special utility vehicles or trailers not regularly covered by standard rear marking plates in order to harmonize existing national requirements.

Combined GTB and CLEPA proposal, superseding documents GRE/2011/46 and GRE/2012/25, to update UN R27 in line with technological progress and performance-based methodologies. The main changes are:

a) Revised provisions to combine color boundaries for the night time color,
b) Replacement of Illuminant C with Illuminant D65 in the measurement of fluorescent materials,
c) Alternative methods introduced for instrumental measurement of the fluorescent color,
d) New Annex 10 to replace reference to ISO 105,
e) Clarification of the wind test (Annex 5),
f) Standardization of the test surface representing the road,
g) Simplification of the test device for clearance to the ground in Annex 3,
h) Amendment of COP requirements, and
i) 36-month transitional period in a new paragraph 14.

Proposal pursuant to GRB discussions (55th session, para. 12) and document GRB/2013/8 to insert the amendments concerning the ASEP provisions as soon as Regulation No. 51 has been accordingly amended (in line with the draft proposal (Reference 2011/XXXX (COD)) of the European Commission “Proposal of the European Parliament and of the Council on the sound level of motor vehicles and of their exhaust systems”).

Proposal to transfer electronic stability control systems provisions out of UN Regulation 13-H and into a new stand-alone regulation. The proposal arises from a perceived need to simplify UN R13-H to facilitate its application within the proposed international whole vehicle type approval.

Proposal to transfer brake assist systems provisions out of UN Regulation 13-H and into a new stand-alone regulation. The proposal arises from a perceived need to simplify UN R13-H to facilitate its application within the proposed international whole vehicle type approval.

Proposal to delete references to electronic control systems and brake assist systems within UN R13-H in order to simplify use of the regulation within the proposed international whole vehicle type approval regulation. These provisions would be taken up by new separate UN Regulations.

Proposal to clarify approval requirements for vehicles and trailers equipped with anti-lock braking systems with regard to the braking compatibility of towing and towed vehicles, including between ABS and compressed-air braking systems. The proposal revises Annexes 10 and 13 of the regulation.

Proposal to improve the definition of “identical” parts as applied to replacement brake discs and drums and to introduce an “identical” part definition for brake linings.

Copy of the proposal to introduce type approval provisions for “valve control at stop-start” into UN R110 (originally submitted to the Working Party on General Safety as document GRSG/2013/26 for consideration at their October 2013 session).

Copy of the proposal to introduce type approval provisions for “valve control at stop-start” into UN R67, submitted to the Working Party on General Safety as document GRSG/2013/24 for consideration at its October 2013 session.

Proposal to correct typographical errors in Corrigendum 2 to Revision 7 of UN R13 wherein the symbols s, s’ and s_o were erroneously transcribed.

Proposal to insert missing item in the table of contents.

Responses to document GRRF-75-19 detailing OICA’s remaining concerns over the proposal to refine the definition of “identical” discs and drums and to extend this to brake linings.

Proposal to improve the reproducibility of the luggage impact test described in annex 9 of UN Regulation No. 17.

Discussion paper concerning the approval markings that might be used under the international whole vehicle type approval system in association with approval codes, numbers, or markings required by individual UN Regulations.

Proposal to transfer electronic stability control systems provisions out of UN Regulation 13-H and into a new stand-alone regulation. The proposal arises from a perceived need to simplify UN R13-H to facilitate its application within the proposed international whole vehicle type approval. This document supersedes document GRRF-75-15.

Proposal to transfer brake assist system systems provisions out of UN Regulation 13-H and into a new stand-alone regulation. The proposal arises from a perceived need to simplify UN R13-H to facilitate its application within the proposed international whole vehicle type approval. This document supersedes document GRRF-75-14.

Proposal for amendments to delete provisions for electronic stability and brake-assist systems from UN R13-H as part of their transposition into new stand-alone regulations.

Proposal to improve the definition of “identical” parts as applied to replacement brake discs and drums and to introduce an “identical” part definition for brake linings. This documents supersedes document GRRF-75-18.