Proposal for amendments to the requirements for Automatically Commanded Steering Functions (ACSF) of Category C, introducing specific provisions for the use of a lane change function with a two-step Human Machine Interface (HMI).

Proposal to introduce provisions in UN Regulation No. 79 (Steering equipment) for the approval of Remote Control Manoeuvring (RCM) systems.

Proposal to

1. delete the requirement limiting the speed reduction during the collision-imminent warning phase
2. define a time range for the warning function to ensure adequate warning at lower speeds
3. introduce specific requirements for the achievable speed reduction for the cases of dry roads and wet roads
4. introduce speed reduction requirements at 70 km/h and 40 km/h for dry and wet roads, respectively
5. restructure provisions under “Specifications” and “Test Procedure” to enable testing at different speeds
6. prevent unintended AEBS deactivation
7. delete certain exemptions (to be addressed at national levels)

Proposal to update certain Standard Reference Test Tyre (SRTT) denominations, to remove the distinction between the two Class C3 tyres, to clarify the text and remove the reference to tyres “not marked with speed symbol”. This document will be handled by GRB during its 68th session and is referenced under GRVA due to the “conversion” of GRRF.

Proposal to introduce a definition for “Extended Mobility Tyre” based on a new “minimum requirement” performance test procedure with the relevant pictogram to be used to properly distinguish such tyres. This document will be handled by GRB during its 68th session and is referenced under GRVA due to the “conversion” of GRRF.

Proposal to amend UN R64 in line with the introduction of the “extended mobility tyre” into UN R30 (see document GRVA/2018/6). This document will be handled by GRB during its 68th session and is referenced under GRVA due to the “conversion” of GRRF.

Proposal to

1. modify the scope with regard to Category S and R agricultural vehicles,
2. modify the paragraph numbering (and related footnotes) to improve text clarity,
3. to correct an error in Annex 5 Table 7 where “35×16” should read “36×16”,
4. amend Annex 7 Part E to address variations of load-carrying capacity for tyres for construction applications (industrial tractors or skid-steers / mini-loaders) with speed category symbol “D”.

Proposal to align GTR No. 3 with technical progress, addressing among others: electromagnetic compatibility/immunity of ABS-systems, ABS performance requirements for category 3-5 vehicles (three-wheelers), uniform requirements for equipment such Emergency Stop Signal and the means to disable the ABS, if equipped. This amendment aims to harmonize GTR with recent amendments made to UN Regulation No. 78 while addressing its use under self-certification compliance systems.

Proposal to correct Revision 2 of UN R55 to align with the text of Supplement 04 to 01 series of amendments. This proposal removes a subparagraph under paragraph 13.1 that should not have been included in the Revision.

Annex 1 of UN R55 concerns the type approval communication form. Item 9.3. requires information “For Class A mechanical coupling devices or components, including towing brackets”. Poland proposes to add “if applicable” to the description in order to avoid interpretations that brackets must be part of the approval (i.e., the approval may concern the coupling ball without additional attachments).

Proposal to align the text in Annex 7 with UN R78 and to insert the reference to the L₆ and L₇ vehicle categories to respond to requests from the industry for type approval for the replacement brake lining assembly for these vehicles.

Proposal from the Task Force on Cyber Security and Over-The-Air Software Update Issues to provide recommendations for the mitigation of risks of unauthorized access to critical automated vehicle software systems, including a proposal for a new UN Regulation.

Proposal from the Task Force on Cyber Security and Over-The-Air Software Update Issues for recommendations on requirements for the certification of software updates and processes to ensure their safe execution, including proposals for a new UN Regulation on uniform provisions concerning the approval of software updates processes and for the establishment of software identification numbers (RXSWIN).

Proposal to clarify the assessments to be conducted by a technical service for complex electronic systems, particularly with regard to advanced driver assistance systems. The proposal includes a new definition to ensure the assessment includes system response to changes in the ambient and/or operating conditions, provisions to ensure that any disabled functions intended for use on a production vehicle are declared and assessed, and a footnote to clarify that the assessment must be reviewed and signed by the same type approval authority as the one responsible for issuing the approval to UN R79.

Document prepared by Japan and the European Commission on behalf of the Informal Working Group on Advanced Emergency Braking System (AEBS). It provides the status of the proposed regulation through November 2018 in order to provide a basis for review and discussion during the January 2019 GRVA session.

Proposal to clarify that UN R140 does not mandate the installation of electronic stability control systems (ESC) on vehicles but rather specifies requirements for the approval of vehicles should they be equipped with an ESC system.

Proposal to introduce provisions relevant to the activation of stop lamps under more conditions than application of the service brake only, e.g. also by regenerative braking.

Proposal to introduce provisions for the approval of Remote Control Manoeuvring (RCM) systems.

Proposal, based on document GRRF-86-13, to resolve measurement concerns in the test requirements for ACSF of Category B1 and C. The proposal addresses issues identified in Annex 8, improves reproducibility and robustness of the procedures, fills in gaps in the test cases, and provides additional details on measuring equipment and test execution.

Proposal to clarify requirements of the optical signal for a CSF intervention to ensure sufficient flashing tell-tale visibility for the driver, to specify the duration of such ACSF signals, to ensure a safe hierarchy of signals (e.g., ESF over CSF) by priority, to clarify that deactivation when departing an ODD means the “off mode”, and to add a cross-reference pointing to paragraphs that define cases of manual and automatic deactivation.

Proposal to align the provisions of UN R90 related to approval numbers and markings with the provisions of Schedule 4 to the 1958 Agreement.

Proposal to clarify that UN R139 does not mandate the installation of brake assist systems (BAS) on vehicles but rather specifies requirements for the approval of vehicles should they be equipped with a BAS system.

Document to provide information on the proposed “3-pillar approach” certification scheme to demonstrate the level of safety and reliability which allows for safe market introduction of automated/autonomous vehicles.