Proposal to replace in paragraph 6.2.6. of UN Regulation No. 118, the obsolete reference to the cable test according to paragraph 12. of ISO 6722 with the correct reference to paragraph 5.22. of ISO 6722-1:2011.

Corrections and clarifications by Japan to its earlier submission concerning the requirements for fire prevention under certain conditions in the event of a rear collision (Proposal for the 03 series of amendments to Regulation No. 34 ).

Presentation on Korean investigations that identify certain conditions under which ceramic printing (black enamel) weakens toughened glass such that the glass no longer meets the mechanical strength requirements of GTR 6, UN R43 or FMVSS 205. Korea proposes amending the UN glazing regulations.

Proposal to add field-of-vision provisions to enhance the safety of pedestrians and other vulnerable road users in narrow alleys and by-streets and other improvements to UN R46. This document replaces documents GRSG/2013/5 and its Corrigendum 1.

Proposal to require, in configurations where the engine compartment is located to the rear of the driver’s compartment, that the engine cannot be started from the driver’s position when the panel giving access to moving parts of the engine is open. It takes into account the comments received during the 105th session and supersedes documents GRSG/2013/14 and GRSG-105-14.

Proposal to align Annex 11 of UN R107 with Regulation (EU) 1230/2012. Annex 11 was originally based on EU Directive 97/27 EC (type approval of vehicles with regard to their masses and dimensions) which has now been replaced by Regulation (EU) 1230/2012, thus prompting the need for realignment.

Supplement 1 to the 01 series included requirements for the positioning of LNG tanks. While the Netherlands believes that mounting the LNG fuel tank 200mm above the road surface is broadly adequate; this proposal aims to ensure that the fuel tank cannot, under any normal driving or stationary working situations, come into contact with the ground. The new wording provides more definitive conditions, including the possibility of a vehicle having one or more flat tires as well as for those vehicles that have ‘kneeling’ capability or variable suspension, both of which lower the frame of the vehicle closer to the ground.

Text prepared by the GRSG secretariat pursuant to GRSG discussions on the proposal for a supplement to UN R107 to align the provisions of Annex 12 (concerning trolley buses) with current electrical standards.

Proposal to require an exterior protection on cylindrical gas tanks. Under the current regulation, such exterior protection may be fitted at the discretion of the manufacturer. The intention is to increase protection against corrosion of cylinders in response to a corroded cylinder explosion in Germany.

Editorial changes to the proposal to introduce more stringent requirements for rear underrun protection devices (document GRSG/2014/18).

Comparison of the OICA and German proposals to set new requirements for rear under-run protection devices.

This proposal corrects an editorial mistake in the tolerances of Annex 6. In Annex 10, paragraph 3.2.2.2. and in Annex 12, paragraph 3.2.2., the correct tolerance should read: 1.5m +0/-5mm. (The same tolerances also appear in UN GTR No. 6, paragraphs 5.4.3. and 6.5.4.2.)

Updated version of the text prepared by the GRSG secretariat pursuant to GRSG discussions on the proposal for a supplement to UN R107 to align the provisions of Annex 12 (concerning trolley buses) with current electrical standards.

Presentation highlighting concerns regarding the separate development of UN R110 and ISO 11439 provisions resulting in diverging test protocols and other differences.

Presentation in support of Japan’s proposal to increase the stringency of UN R34.

Presentation in support of the development of technical regulatory specifications to prevent odometer tampering.

Adopted version of the proposal by Japan (GRSG/2014/16) to amend provisions for testing of fire risks in rear-end collisions as amended during the May 2014 GRSG session.

Presentation in support of the proposal to include odometer provisions in UN R39, including a review of references to odometers across other UN Regulations.

European Commission request for input on the possible type approval of new systems that enable unlocking cars via smart phones and that send silent alarms to security services via the Internet.

Presentation concerning the asynchronous use of an indicator space for communicating information to the driver. The presentation explains the concept of this “common space” that two or more symbols may share but only use one at a time. The presentation proposes that two or more symbols might be displayed sequentially in the same common space (i.e., alternately flashing symbols).

Query concerning the intent of the proposed changes to the test procedures for rear underrun protection devices (RUPD). Sweden believes that the wording of the amendments proposed in document GRSG/2014/18 would change the nature of RUPD from being generic devices for installation across ranges of vehicle types to being vehicle-specific devices requiring repetitive testing for approval to be installed on a range of vehicles. Therefore, Sweden raises the question of whether this is the intent of the German proposal.

Table proposing scope and testing of triggering behavior, crash resistance, and post-crash performance within the scopes of UN R94, UN R95, and UN R12 as well as component-only testing.

Final feedback table from CLEPA on draft accident emergency call system approval provisions (action item from the 5-6 December 2013 AECS informal group session).