Summary of the 8th session of the subgroup working on the International Whole Vehicle Type Approval (IWVTA) regulation (“UN Regulation No. 0”).

Proposal to transfer brake assist system systems provisions out of UN Regulation 13-H and into a new stand-alone regulation. The proposal arises from a perceived need to simplify UN R13-H to facilitate its application within the proposed international whole vehicle type approval. This document supersedes document GRRF-75-14.

Proposal for amendments to delete provisions for electronic stability and brake-assist systems from UN R13-H as part of their transposition into new stand-alone regulations.

Proposal to transfer electronic stability control systems provisions out of UN Regulation 13-H and into a new stand-alone regulation. The proposal arises from a perceived need to simplify UN R13-H to facilitate its application within the proposed international whole vehicle type approval. This document supersedes document GRRF-75-15.

Draft text for a revised and updated 1958 Agreement pursuant to the project to establish an international whole vehicle type approval system.

The intention of this document is to explain important concepts and to provide guidance for Contracting Parties in order to enable effective and consistent application of the IWVTA process. This revision incorporates discussions from the 8th SGR0 group meeting.

This proposal concerns documents SGR0-02-04-Rev.4 and IWVTA-SGR0-08-08, paragraph 13.4. Both documents contain provisions whereby Contracting Parties accepting approvals to earlier versions of individual regulations or accepting the absence of such approvals shall notify the UN secretariat. This proposal clarifies that this obligation applies both to parties using the Limited IWVTA (i.e., approvals to lower stringency levels) and the Universal IWVTA (i.e., approvals to the latest versions of each regulation).

Proposal for the answer to question 7 of the draft Q&A: How can a Contracting Party use the international whole vehicle type approval scheme?

Proposed changes to documents SGR0-05-03-Rev.2 (“IWVTA Explanatory Note") and SGR0-06-06-Rev.2 (“Request for guidance from WP.29 on upgrade of UN Regulation No. 0”).

Progress report from the expert group working on the IWVTA regulation providing on overview of the proposed whole vehicle regulation, issues for attention of the World Forum, and consideration of future development.

Progress report on the revision to the 1958 Agreement to enable the International Whole Vehicle Type Approval system.

This informal document builds on informal document WP.29-159-19 (submitted by the Chair of IWVTA to WP.29 in March 2013), and complements working document WP.29/2013/134 submitted for consideration at the WP.29 November 2013 session.

It provides an update of the progress achieved within the IWVTA informal group since the submission of document WP.29/2013/134. As a result of this progress, the majority of outstanding issues have been resolved, leaving only a few issues which need further fine-tuning by the IWVTA sub-group on the review of the 1958 Agreement.

Figures illustrating coverage of UN Regulations applicable to the International Whole Vehicle Type Approval system (proposed UN Regulation 0) as a function of the application of the UN Regulations by the various Contracting Parties to the 1958 Agreement.

This document reports on the review by the GR of the regulations under consideration for inclusion in the international whole vehicle type approval system. The aim is to establish IWVTA based upon a first set of regulations easily transposed to the whole vehicle system. A second phase would address regulations requiring significant revision to reach consensus.

Draft proposal for a procedure to allow for the exemption of new technologies from relevant existing regulatory requirements in cases where those existing requirements present incompatible, inapplicable, and/or unwarranted burdens.

Proposal to replace the term “climate of trust” with a “risk assessment methodology” in addressing conformity of production assessments.

Document prepared by the WP.29 Secretariat reviewing 1958 Agreement procedures as they would be revised under the proposals being considered by the IWVTA 1958 Agreement subgroup.

Presentation to review the draft regulation that would enable the international type approval of whole vehicles.

Discussion paper concerning the approval markings that might be used under the international whole vehicle type approval system in association with approval codes, numbers, or markings required by individual UN Regulations.

Explanatory document in question and answer form to introduce and explain the International Whole Vehicle Type Approval system and its “UN Regulation 0”.

Status of the lighting regulations listed for inclusion within the International Whole Vehicle Type Approval systems.

Proposal from the IWVTA expert group for revisions to the 1958 Agreement, including text in brackets for further consideration.

UN Office of Legal Affairs responses to questions raised by the expert group preparing revisions to the 1958 Agreement concerning conditions for the delegation of voting authority to another Contracting Party and on amendment of the title of the agreement.

Russian explanation that its laws require documentation to be in the Russian-language. Russia does not accept type-approval documents directly, but first transposes the documents into an acceptable Russian form. Therefore, Russia proposes to delete the direct acceptance of “documentation”. Russia also raises a concern over possible contradictory clauses with regard to “if-fitted” equipment such as TPMS.

List of issues with comments concerning open aspects related to the explanatory note under development for the IWVTA UN Regulation No. 0.

Suggested revisions to the draft IWVTA regulation (with reference to document SGR0-02-04/Rev.4).

Revised document concerning the continuous alignment of the whole-vehicle UN Regulation No. 0 with the individual UN Regulations of which it is comprised as these individual UN Regulations are amended over time.

The European Commission position on the Japanese proposal (document SG58-07-04) for amendments to the 1958 Agreement (within the context of the International Whole Vehicle Type Approval system).

Updated draft version of the amended 1958 Agreement pursuant to the establishment of an International Whole Vehicle Type Approval system.

As part of the work on establishing an International Whole Vehicle Type Approval (IWVTA) system, Japan has noted differences between European and Japanese vehicle registration (license) plates. Since UN R4 would be part of the IWVTA process, Japan seeks to add its plate requirements to the European requirements embodied in UN R4 in order to enable Japan to adopt this regulation and thereby adhere to the IWVTA.

OICA comments on document GRE-69-15/Rev.1 concerning the lighting regulations under consideration for inclusion in the International Whole Vehicle Type Approval (IWVTA) system.

Proposal to add registration plates used in non-European Contracting Parties to the scope of the regulation. This document is based on the previous document GRE-69-23.

Review of international whole vehicle type approval issues pertinent to GRRF from the September 2013 session.

IWVTA working paper as revised and updated during the 105th GRSG session.

Presentation in support of and offering revisions to Japan’s proposal (document GRSG/2013/5) for amendments to UN R46 in order to bring the regulation into line with Japanese regulations (pursuant to the International Whole Vehicle Type Approval initiative).

Update on the integration of UN Regulations under the purview of the Working Party on General Safety into the proposed International Whole Vehicle Type Approval system.

Comments from IEC on the informal document GRE-69-15/Rev.1 (“Priority of Discussion on Technical Requirements for IWVTA and Draft Report to IWVTA Informal Meeting”)

Proposal for a new regulation for the approval to tires installed on a vehicle. This regulations is proposed for use within the International Whole Vehicle Type Approval system in order to ensure proper tire fitment on a vehicle under IWVTA evaluation.

Consideration of “optional requirements” of UN Regulations within the context of the proposed International Whole Vehicle Type Approval system.

OICA presentation of views on the proposed amendments to the convention government UN Regulations and mutual recognition of type approvals.

The proposed introduction of an international whole vehicle type approval system has raised a number of technical questions regarding the scope and obligations inscribed within the 1958 Agreement. UN Office of Legal Affairs counsel was requested to provide answers these questions.

Proposal to delete references to electronic control systems and brake assist systems within UN R13-H in order to simplify use of the regulation within the proposed international whole vehicle type approval regulation. These provisions would be taken up by new separate UN Regulations.

Proposal to transfer brake assist systems provisions out of UN Regulation 13-H and into a new stand-alone regulation. The proposal arises from a perceived need to simplify UN R13-H to facilitate its application within the proposed international whole vehicle type approval.

Proposal to transfer electronic stability control systems provisions out of UN Regulation 13-H and into a new stand-alone regulation. The proposal arises from a perceived need to simplify UN R13-H to facilitate its application within the proposed international whole vehicle type approval.

Japan comments on the proposal for a procedure by which a new technology could be exempted from certain requirements of a UN Regulation with which it is incompatible.

Proposal for Article 12.2 of the revised 1958 Agreement.

Document raising concerns that the current draft of the proposed UN Regulation 0 on whole vehicle type approvals would impose new mutual recognition requirements beyond the current 1958 Agreement.

Presentation from the WP.29 secretariat.

Australian proposal to allow for a “not to apply at this time” notification rather than the current term expressing “disagreement”. Australia notes that a Contracting Party can perfectly agree with a regulation, but be unable to implement it until a date later than the UN date of “entry into force”.

Japan comments on the proposal for a procedure by which a new technology could be exempted from certain requirements of a UN Regulation with which it is incompatible.

Comments on the consolidated draft proposal for revision of the 1958 Agreement pursuant to the development of the IWVTA system.

Russian views on interaction and complementarity between the proposed UN international whole vehicle type approval system and other, especially national, regulatory requirements.

Revised document asking for WP.29 guidance on the process for integrating new UN Regulations or amendments to existing regulations into Annex 4 of the UN Regulation 0 (i.e., altering the breadth of the whole vehicle type approval regulation).

DETA informal group input concerning the use of the Data Exchange for Type Approvals in concert with the International Whole Vehicle Type Approval system.

Comments concerning certain revisions and editorial changes to the 1958 Agreement proposed by Japan.

Comments on the consolidated draft proposal for revision of the 1958 Agreement pursuant to the development of the IWVTA system.

Outcomes from the sixth session of the subgroup working on UN Regulation 0 to enable the international type approval of whole vehicles.

Responses from the UN Office of Legal Affairs to questions posed by the International Whole Vehice Type Approval (IWVTA) informal group concerning the ramifications of possible amendments under discussion within the group.

Proposal for a procedure through which a manufacturer could receive an exemption from WP.29/AC.2 for a new technology which is incompatible with one or more requirements of a UN Regulation from those requirements.

Presentation on the draft regulation for international whole vehicle type approval.

Overview of the proposed plans to amend the 1958 Agreement as part of the development of an international whole vehicle type approval system.

The Netherlands has proposed to introduce a harmonized numbering system for the approvals granted according the UN regulations without the need for any changing of the type approval markings on the approved vehicles, systems, components and parts.

draft proposal of questions and answers for a Q&A document to explain the proposed UN Regulation No. 0 on whole vehicle type approval.

Clarification to affirm CLEPA’s understanding that the proposed new numbering system applies only to the numbering of type approval certificates and not to the approval mark to be put on each approved components.

Clarification by Russia to affirm its understanding that when new requirements are introduced by a later series of amendments to a UN Regulation, type approval can only be granted if a vehicle type complies with the new requirements.

This document describes the process of upgrading UN Regulation No. 0 for inclusion in the list of requirements (Annex 4 to the UN Regulation No. 0), newly adopted UN Regulations, and new series of amendments to existing UN Regulations. Once WP.29 and AC.1 be involved in this process, it is necessary to obtain the agreement of WP.29 on this process. Therefore SGR0 should submit to WP.29 a request for guidance.

The need for a request for guidance from WP.29 on the exchange of information between Contracting Parties to facilitate implementation of UN Regulation No. 0 is stipulated in the IWVTA Explanatory Note (documents SGR0-05-03 and SGR0-05-03/Rev.1). This document is intended to explain this issue to WP.29.

Proposed revisions to the table of priorities for integrating GRPE-related UN Regulations into the International Whole Vehicle Type Approval system (document GRPE-65-19).

Update on the status of work to incorporate UN Regulations under the purview of the GRPE into the International Whole Vehicle Type Approval system.

Responses from the UN Office of Legal Affairs to questions posed by the International Whole Vehice Type Approval (IWVTA) informal group concerning the ramifications of possible amendments under discussion within the group.

Japanese explanation of its field of vision requirements and test specifications under UN R125 and R46 pursuant to enabling Japan’s participation in IWVTA.

Priority of Discussion on Technical Requirements for IWVTA

Overview for GRE on the objective, status, and scope of IWVTA including
component regulations under consideration for integration into the whole vehicle approval system.

Table of lighting-related regulations for integration into the international whole vehicle type approval system.

Revision by the SG58 subgroup chair of paragraph 6 in the preamble proposed in document S58-02-02/Rev.1.

Draft of modifications to the 1958 Agreement pursuant to plans for the International Whole Vehicle Type Approval system.

Presentation from the “ambassador” of the Informal Group for the establishment of an International Whole Vehicle Type Approval (IWVTA) system concerning activities and information relevant to the GRRF.

Concerns from legal experts towards ensuring that revisions to the 1958 Agreement pursuant to the implementation of the International Whole Vehicle Type Approval system would be agreed by all Contracting Parties.

Comments from Japan concerning the smooth implementation of the International Whole Vehicle Type Approval system.

Korea raises the point that countries may adopt a UN Regulation without substituting it for their local legislation. Under such a scenario, the country accepts foreign certifications, but not does enforce the regulation domestically. Korea notes that it uses self-certification without CoP.

Complete working draft of the revised 1958 Agreement pursuant to the proposed International Whole Vehicle Type Approval system prior to the start of the 5th session of the IWVTA subgroup on revisions to the 1958 Agreement.

Comments on the consolidated working draft of the revised 1958 Agreement in view of the proposed implementation of an International Whole Vehicle Type Approval system.

Outcomes of the 4th session of the International Whole Vehicle Type Approval subgroup on revision of the 1958 Agreement.

Proposed amendments to the proposed revisions to the 1958 Agreement pursuant to the international whole vehicle type approval project.

Proposal towards reaching common understanding of the International Whole Vehicle Type Approval (IWVTA) procedure under the framework of the 1958 Geneva Agreement. This document introduces statements that may be used as legal provisions enabling effective application of the IWVTA process.

Working draft of the regulation to enable an international whole vehicle type approval system.

Complete working draft of the proposed revisions to the 1958 Agreement in view of the implementation of an International Whole Vehicle Type Approval system pursuant to the 4th session of the IWVTA subgroup on revisions to the 1958 Agreement.

Presentation on objectives of the International Whole Vehicle Type Approval initiative and review of UN Regulations under the purview of GRB that could figure into the IWVTA system.

Complete marked-up working draft of the revised 1958 Agreement pursuant to the proposed International Whole Vehicle Type Approval system following the 3rd session of the IWVTA subgroup on revision of the 1958 Agreement.

Complete version without markups of the revised 1958 Agreement pursuant to the work on an International Whole Vehicle Type Approval system and following the 3rd session of the subgroup on revision of the 1958 Agreement.

Reproduction of the document DETA-17-07 prepared by the DETA informal group for use by the SGR0 subgroup .

Report of the ‘ambassador’ delegated by the IWVTA informal group to coordinate work with the GRPE on establishing the international whole vehicle type approval system.