Presentation on paragraph 5.6.1.4 of the draft amendment to UN R79 intended to enable the approval of automatically controlled steering functions at speeds above 10 km/h. This paragraph concerns transitions between the human driver and the automated steering system.

Overview of proposed test modes/procedures for Category E automatically commanded steering systems.

Updated version of the proposal to remove tables specifying general values for replacement discs and drums that are identical to the original (2.3.3.4) since such replacements must by definition have values identical to the corresponding original parts. The proposal also would change the maximum permitted thickness variation of discs for medium and heavy vehicles from 0.030 mm to 0.050 mm (the common OEM specification). This revised proposal clarifies that the proposal would revise the specifications for vehicles of categories M3, N3, O3 and O4 but retain the maximum permitted specification of 0.030mm for vehicles of categories M2 and N2.

Presentation highlighting the growing use of carbon-ceramic (CSiC) brake discs and the need to address these products under UN R90 given that the replacement discs regulation is founded upon conventional cast iron technologies.

Proposed changes to the working draft text ACSF-04-20.

OICA presentation on approaches and trade-offs in handling driver availability for transitions between automated vehicle system and human driver.

OICA and CLEPA note that the current work on ACSF does not address class O vehicles (trailers) and therefore leaves unsettled the issue of heavy-duty commercial vehicles. The two groups signal that the informal group must coordinate with the GRRF to ensure that trailers are eventually incorporated in the ACSF approval procedures under UN R79.

Schematic flow of events and responses for automatically commanded steering functions, including transition demands and fall-back on minimum risk maneuvers by the system.

Table of requirements for automatically commanded steering function capabilities (e.g., hazard warning activation, driver alerts, minimum risk maneuvers, etc.) according the ACSF category.

Test procedure application for advanced systems of category D depending upon the steering configuration per category B (B1:hands-on with detection system steering, B2: hands-off enabled steering).

Updated list of functions/capabilities per ACSF category, including B1 and B2 categories addressing “hands-on” and “hands-off” lane-keeping.

Document GRRF/2016/20 proposes to remove certain design restrictions that impede the application of new technologies, especially related to trailer power steering systems and the use of energy from the towing vehicle, including specification of the connector through which electrical energy is supplied in the proposal. Although this proposal was approved in principle at the 80th GRRF session, it was agreed that the proposal would be reviewed at the 81st GRRF to define an open value [X] in paragraph 2.1.1. of Annex 5. It has subsequently been concluded that this change to paragraph 2.1.1. is not needed. Therefore, this proposal removes the change to the paragraph from GRRF/2016/20.

Presentation on French government views on the approval of automated steering at speeds above 10 km/h under UN Regulation No. 79. The principle recommendation is to restrict amendments to UN R79 to lateral vehicle control as speeds above 10 km/h while setting other work on more advanced capabilities (longitudinal + latitudinal, lane change, passing, etc.) for future separate regulations.

Consolidated draft for the approval of automated steering systems pursuant to the discussions and decisions of the 5th ACSF informal group session (January 2016).

Working draft from the ACSF informal group to enable the approval of automated steering systems intended to operate at speeds greater than 10 km/h presented for information and discussion at the 81st GRRF session.

UN R90 specifies one minimum shear strength requirement for brake shoe assemblies and one requirement for brake pad assemblies in Regulation No. 90 via a reference to ISO 6312. However, ISO 6312 specifies test methods for hot and cold shear tests. Therefore, GRRF is requested to clarify whether the strength requirements are for both hot and cold shear.

UN R13 allows for the exemption of certain vehicles from the requirement for electronic stability controls. This proposal seeks to clarify the scope of the exemptions to include any special purpose vehicle with a non-standard chassis. The change was prompted by a modified vehicle where use of ESC was not feasible, but where the current UN R13 language left doubt as to whether the ESC requirement was applicable.

Revised version of document GRRF/2016/6 pursuant to discussions held during the February 2016 GRRF session proposing to delete provisions for electronic stability and brake-assist systems from UN R13-H as part of their transposition into new stand-alone regulations.

Revised version of document GRRF/2016/7 pursuant to discussions held during the February 2016 GRRF session, proposing a new UN Regulation based upon brake-assist system provisions extracted from UN R13-H.

Revised version of document GRRF/2016/8 pursuant to discussions held during the February 2016 GRRF session, proposing a new UN Regulation comprised of provisions concerning electronic stability control systems extracted from UN R13-H.

Presentation explaining the proposal to establish requirements for the approval of replacement brake lining assemblies for L-category vehicles.

Revised proposal to align UN R78 with the provisions for anti-lock braking systems used in other regulations, including specific exemptions for certain off-road vehicles as incorporated in UN Regulation No. 13. The proposal clarifies the limits on the use of any temporary ABS deactivation switch and prohibition against permanent disabling of ABS if fitted on a motorcycle. The European Commission prepared this revised proposal in cooperation with Germany, the Netherlands and IMMA. Given the importance of the changes, the proposal includes transitional provisions.