Correction of two minor reference errors contained in the proposal for Supplement 2 to the 04 series of amendments to Regulation No. 41 which was adopted during the March 2015 session of WP.29.

Proposal to specify that conditioning of exhaust or silencing systems is required only in cases where the fibrous materials are in contact with exhaust gases because there is no possibility for the dispersion of fibrous materials under any other condition.

Table of potential areas for future GRB work prepared during an informal meeting held in Paris during 2-3 July 2015.

The current text of UN R41 provides an allowance that increases the noise limit value by 1 dB(A) for motorcycles tested only in second gear under Annex 3. This allowance expires on 1 January 2017. IMMA proposes to extend this allowance until 1 January 2018 in response to the delayed implementation of UN R41-04 in the EU (2016 instead of planned 2014).

Presentation on Japanese vehicle noise activities, including alignment with UN Regulations and subsequent abolition of certain current Japanese regulatory requirements (e.g. cruising noise, etc.).

Presentation of Japan’s plans for phasing in UN R41, UN R51 (Phase 2, but not Phase 3 limits), and UN R117 requirements.

In response to concerns that approval agencies may not grant manufacturers the additional 1dB for L(wot) on conformity of production tests as changes had been made to Annex 6 of R41-04, GRB issued an interpretation recorded in the report of its 56th session. The proposal formalizes the interpretation as an explicit provision of the regulation.

Proposal to introduce a calculated engine speed (in addition to measured engine speed) for MT vehicles and for continuously variable transmission (CVT)/automatic transmission (AT) with locked gear mechanism into UN Regulation No. 41 for the tests in Annex 3 and Annex 7 (Additional sound emission provisions – ASEP)

Reference prepared by the WP.29 secretariat

In response to concerns that approval agencies may not grant manufacturers the additional 1dB for L(wot) on conformity of production tests as changes had been made to Annex 6 of R41-04, GRB issued an interpretation recorded in the report of its 56th session. However, IMMA believes that industry and agency personnel may still not be aware of the interpretation. Therefore, IMMA proposes to codify the interpretation within UN R41.

The purpose of this proposal is to update the reference to the latest version of the ISO 10844 and to introduce transitional provisions for the shift of the test track requirements from ISO 10844: 1994 to ISO 10844: 2014. This proposal supersedes document GRB/2015/5.