Proposal to clarify and align the French version of the text with regard to its English counterpart and the provisions on locking devices for each vehicle door.

Proposal to correct a cross-reference with regard to an ISOFIX exemption.

Proposal to correct an oversight by adding the minimum requirement for at least a two-point lap belt (Br3, Br4m, Br4Nm) for use with rearward facing child restraints for M₃ as is already the case for M₂ vehicles.

Proposal to correct a cross-reference regarding an ISOFIX anchorage exemption.

Proposal to amend document GRSP/2017/40 in order to clarify the performance requirements for impacted doors (i.e., determination of whether a door remained closed during the test) and to reduce the proposed force level from 500 N to 400 N for the test to open the door.

Proposal to align end-user information provisions with those adopted for UN R44.

Certain enhanced child restraint systems are designed for forward-facing and rearward-facing depending upon the age of the occupant. This proposal would clarify the labeling and packing information to avoid confusion between the requirements for these “dual” systems and exclusively forward-facing CRS.

Pursuant to the concern raised by Spain to avoid a misinterpretation that shoulder strap positioners must be designed to be released before the harness buckle, This proposal clarifies that a shoulder strap positioner may be released before, after, or simultaneously with the harness buckle. The proposal also improves the text with regard to the release of modules from a base.

CLEPA presentation proposing further study of possible responses to the concerns raised and solution proposed in document GRSP/2018/6 regarding non-integral child restraints (e.g., booster seats) and the risk of injuries from narrow contact with buckle and safety-belt.

During its 61st session, GRSP approved Supplement 3 to the 01 series of amendments and Supplement 2 to the 02 series of amendments. This proposal reinserts text inadvertently omitted during the reproduction of the text as approved during the session.

Proposal of amendments to ECE/TRANS/WP.29/GRSP/2018/6

Proposal to require rigid barrier frontal crash testing for commercial use quadricycles (i.e., four-wheeled vehicles with unladen mass not more than 400 kg (550 kg for goods-carrying vehicles), not including the mass of batteries in the case of electric vehicles and whose maximum continuous rated power does not exceed 15 kW).

Global NCAP letter of November 2016 supporting attention to the crashworthiness of L-category four-wheeled vehicles (L6/L7) via a “new global standard”.

December 2015 notes prepared by Global NCAP in safety awareness following “Safer Cars in India” program.

Proposal to amend to document GRSP/2018/10 in order to clarify the torque specification for attaching seats and to delay the proposed entry into force.

Proposal clarify that only a 3-point-belt shall be permitted for the driver seating position in order to address differing interpretations among Technical Services regarding which requirements apply for driver position seat-belt approval.

Clarification with regard to the possibility to install side-facing seats in buses of category M₂ and M₃ of classes A and I.

Proposal to introduce references to specifications for the construction, preparation and certification of the Flexible Pedestrian Legform Impactor (FlexPLI).

Proposal to remove the age and stature characteristics from the definition of an “Infant carrier” to avoid misinterpretations. These seats may be used by children above the age specification provided they fall within the stature limits.

Proposal to explicitly allow the granting extensions for type approvals under the 02 series of amendments and for any approval not affected by 03 series of amendments pursuant to the new guidelines on UN Regulations.

The video used during the presentation can be downloaded separately.