Proposal to clarify and align the French version of the text with regard to its English counterpart and the provisions on locking devices for each vehicle door.

Proposal to correct a cross-reference with regard to an ISOFIX exemption.

Proposal to correct an oversight by adding the minimum requirement for at least a two-point lap belt (Br3, Br4m, Br4Nm) for use with rearward facing child restraints for M₃ as is already the case for M₂ vehicles.

Proposal to correct a cross-reference regarding an ISOFIX anchorage exemption.

Proposal to amend document GRSP/2017/40 in order to clarify the performance requirements for impacted doors (i.e., determination of whether a door remained closed during the test) and to reduce the proposed force level from 500 N to 400 N for the test to open the door.

Proposal to align end-user information provisions with those adopted for UN R44.

Certain enhanced child restraint systems are designed for forward-facing and rearward-facing depending upon the age of the occupant. This proposal would clarify the labeling and packing information to avoid confusion between the requirements for these “dual” systems and exclusively forward-facing CRS.

During its 61st session, GRSP approved Supplement 3 to the 01 series of amendments and Supplement 2 to the 02 series of amendments. This proposal reinserts text inadvertently omitted during the reproduction of the text as approved during the session.

Pursuant to the concern raised by Spain to avoid a misinterpretation that shoulder strap positioners must be designed to be released before the harness buckle, This proposal clarifies that a shoulder strap positioner may be released before, after, or simultaneously with the harness buckle. The proposal also improves the text with regard to the release of modules from a base.

Proposal of amendments to ECE/TRANS/WP.29/GRSP/2018/6

CLEPA presentation proposing further study of possible responses to the concerns raised and solution proposed in document GRSP/2018/6 regarding non-integral child restraints (e.g., booster seats) and the risk of injuries from narrow contact with buckle and safety-belt.

Proposal to require rigid barrier frontal crash testing for commercial use quadricycles (i.e., four-wheeled vehicles with unladen mass not more than 400 kg (550 kg for goods-carrying vehicles), not including the mass of batteries in the case of electric vehicles and whose maximum continuous rated power does not exceed 15 kW).

Global NCAP letter of November 2016 supporting attention to the crashworthiness of L-category four-wheeled vehicles (L6/L7) via a “new global standard”.

December 2015 notes prepared by Global NCAP in safety awareness following “Safer Cars in India” program.

Proposal to amend to document GRSP/2018/10 in order to clarify the torque specification for attaching seats and to delay the proposed entry into force.

Proposal clarify that only a 3-point-belt shall be permitted for the driver seating position in order to address differing interpretations among Technical Services regarding which requirements apply for driver position seat-belt approval.

Clarification with regard to the possibility to install side-facing seats in buses of category M₂ and M₃ of classes A and I.

Proposal to introduce references to specifications for the construction, preparation and certification of the Flexible Pedestrian Legform Impactor (FlexPLI).

Proposal to remove the age and stature characteristics from the definition of an “Infant carrier” to avoid misinterpretations. These seats may be used by children above the age specification provided they fall within the stature limits.

Proposal to explicitly allow the granting extensions for type approvals under the 02 series of amendments and for any approval not affected by 03 series of amendments pursuant to the new guidelines on UN Regulations.

The video used during the presentation can be downloaded separately.

Proposal from the Informal Working Group (IWG) on Global Technical Regulation No. 9 Phase 2 (GTR9-PH2) to introduce the Flex PLI lower legform impactor and related test procedures into the GTR on pedestrian safety protection, including new bumper test area specifications.

Appendix to the proposal for Amendment 2 to GTR 9 providing the rationale, justifications, and other supplemental information concerning the development of the amendment to introduce the Flex PLI lower legform impactor and related test procedures, including new bumper test area specifications.

Proposal to require seat belt components such as retractors to remain functional if damaged during the load-retention test according to Annex 9 of UN R17. Such components have occasionally been damaged during testing such that their functionality has been impaired. In order to ensure adequate occupant safety, this proposal would require all safety-belt components to be included in the test installation and require post-test inspection to confirm the continued functionality.

Proposal to introduce installation specifications for securing a cab mounted on a vehicle to the test rig for tests B and C, as is currently provided for test A, under UN R29. This proposal aims to improve repeatability and reproducibility while allowing more flexibility in permitting the use of rigid composite blocks and/or (adjustable) metal brackets in securing the vehicle in the place of the wooden block presently prescribed in Figure 1.

Proposal to require checking of non-integral child restraints (e.g., booster seats) for risk of injuries caused by narrow contact with buckle and safety-belt such as may be caused by strong local pressure from twisted buckles, belts, or tongues.

Proposal to amend the transitional provisions in order to explicitly confirm that approvals granted prior to the respective supplements to the 01 and 02 series of amendments and the establishment of the new guidelines on UN Regulation procedures (documents WP.29/2017/107 including Corrigendum 1 and Addendum 1) will continue to be accepted. This amendment confirms the understanding that the new procedures apply only to new approvals and do not affect previous approvals.

Proposal to add provisions for the definition and requirements for lower tether strap and the definition and specifications of Lower Tether Anchorages (LTA).

Alternative proposal to GRSP/2017/27 submitted by the EC to clarify and improve airbag warning label requirements and to group these provisions under UN R16 in order to avoid the need to update multiple regulations in case of changes. OICA would not, however, add provisions concerning language variations (these are handled at the point of sale).

Proposal to delete Appendix 5 and thereby end static testing as a compliance option. In addition, this proposal amends Appendix 1 by reducing the forward movement of the head of the manikin to 1.2 m in alignment with UN Regulation No. 14. Further, the proposal would limit the movement of the seat anchorages to 100 mm to ensure a minimum residual space for the passenger between the seats. Lastly, to ensure that seat fixations are reliably fastened after relocation, the proposal would require the necessary information to be marked directly on the seat and provided in the owner’s manual.

Proposal to amend the transitional provisions in order to explicitly confirm that approvals granted under the preceding series of amendments and the establishment of the new guidelines on UN Regulation procedures (documents WP.29/2017/107 including Corrigendum 1 and Addendum 1) will continue to be accepted. This amendment thus confirms the understanding that the new procedures apply only to new approvals and do not affect previous approvals.

Proposal prepared by the secretariat to correct and improve the quality of the image of Figure 1a of Annex 5.

Proposal from Spain on behalf of the Technical Services Group (TSG) on UN R129 to require that the shoulder strap positioner, if any, and the buckle open independently of each other in order to satisfy the requirement that the buckle can be opened by a single action. Currently, if the shoulder strap positioner has not been opened, it is possible that the buckle cannot be opened.

Proposal from Spain on behalf of the Technical Services Group (TSG) on UN R129 to require that the shoulder strap positioner, if any, and the buckle open independently of each other in order to satisfy the requirement that the buckle can be opened by a single action. Currently, if the shoulder strap positioner has not been opened, it is possible that the buckle cannot be opened.

Proposal from Spain on behalf of the Technical Services Group (TSG) on UN R129 to require that the shoulder strap positioner, if any, and the buckle open independently of each other in order to satisfy the requirement that the buckle can be opened by a single action. Currently, if the shoulder strap positioner has not been opened, it is possible that the buckle cannot be opened.

Proposal from Spain on behalf of the Technical Services Group (TSG) on UN R129 to require that the shoulder strap positioner, if any, and the buckle open independently of each other in order to satisfy the requirement that the buckle can be opened by a single action. Currently, if the shoulder strap positioner has not been opened, it is possible that the buckle cannot be opened.