Revisions to documents GRSG/2012/20 and 21 concerning Amendments 1 to 3 of UN R60 and UN GTR No. 12 that would delete Annex 3 on special provisions for levers and Annex 4 pursuant to GRSG-103 discussions.

Revisions to documents GRSG/2012/20 and 21 concerning Amendments 1 to 3 of UN R60 and UN GTR No. 12 that would delete Annex 3 on special provisions for levers and Annex 4 pursuant to GRSG-103 discussions

Draft revision of UN R110 to incorporate provisions for liquefied natural gas components and systems, submitted by the Gaseous Fueled Vehicles informal group and its LNG task force for review and comments at the 103rd Working Party on General Safety session.

Updated draft revision of UN R110 to incorporate provisions for liquefied natural gas components and systems, submitted by the Gaseous Fueled Vehicles informal group and its LNG task force for review and comments at the 103rd Working Party on General Safety session.

Introductory comment to support discussion of adding provisions to UN R107 for engine compartment fire suppression systems and of a method for testing such systems that has been developed by SP Technical Research Institute of Sweden.

Proposal to add field-of-vision provisions to enhance the safety of pedestrians and other vulnerable road users in narrow alleys and by-streets and other improvements to Regulation No. 46, including to further the development of the International Whole Vehicle Type Approval (IWVTA) program.

Presentation on the work of the Liquefied Natural Gas Task Force on new requirements for LNG components for introduction into Regulation No. 110.

Copy of the guidelines for use in GRSG discussion of same.

Proposal from the International Association of the Body and Trailer Building Industry (CLCCR) to ensure the lateral stability of a rearward facing wheelchair by restraint with a rigid device or with a flexible strap anchoring the wheelchair and its occupant.

Progress report from the informal group of experts working to introduce provisions for plastic windscreens, window panes, and other plastic glazing into UN R43.

Revised proposal (superseding GRSG/2012/22) to clarify the interior materials to be tested by introducing the definition used in the US Federal Motor Vehicle Safety Standard 302 (e.g., any material or component which is within 13 mm of the interior compartment air space shall meet the requirements).

Progress report on the ISO effort to prepare an international standard for minimum safety, ergonomic and performance requirements for camera-monitor systems intended to replace mandatory inside and outside mirrors for road vehicles (e.g. Classes I to IV and VII as defined in UN R46).

Proposal to amend UN R43 to cover various types of plastic glazing under consideration by automotive industry for installation in vehicles in order to reduce vehicle weight and thereby fuel consumption and CO2 emissions.

Companion presentation for the discussion paper on motor coach rollover accidents, passenger ejections, and use of laminated window glazing and seat belts (document GRSG-103-04).

Presentation on a method for testing engine-compartment fire-suppression systems that has been developed by SP Technical Research Institute (as introduced by Sweden in document GRSP-103-12 with a view toward its inclusion in UN R107).

Presentation on Japan’s concerns and proposals regarding the rear vision of large vehicles on narrow streets and alleyways and pedestrian safety. Japan wishes to resolve this issue in order to make progress towards the International Whole Vehicle Type Approval system.

Correction of errors and oversights in Supplement 10 to the 01 series of amendments to Regulation No. 67 (document WP.29/2011/108) adopted at the November 2011 WP.29 session.

Presentation in support of the “Service Doors, Windows, and Emergency Exits” informal group proposal to amend UN R107 (document GRSG-103-03).

WP.29 voted to align UN Regulation procedures with the EU Whole Vehicle Approval Directive 2007/46/EC. This document proposes revisions to regulations under the purview of GRSG per the revised UN Regulatory Procedures and Transitional Provisions (document WP.29/1044/Rev.1).

German-language summary table of the development of ISO standards for camera-monitor systems to replace rear-view mirrors and timetable to finish standard by the end of April 2013.

English-language version of the summary table on the development of ISO standards for camera-monitor systems to replace rear-view mirrors and timetable to finish standard by the end of April 2013.

Review of the IWVTA program, potential impact on UN Regulations, and request for Working Party (GR) support in reviewing and adapting, where warranted, the regulations being integrated into the proposed IWVTA system.

GRSG/2012/15 proposes amendments to UN R107 developed by the Informal Group for Service Doors, Windows, and Emergency Exits (SDWEE) for inclusion in the 06 series of amendments to the regulation.

Document WP.29/2012/87 is a GRSG proposal (04 series of amendments) to reduce the blind spot on the passenger side of N2 and N3 (medium/heavy commercial) vehicles under UN R46. This new proposal would clarify that prior approvals not impacted by the 04 series amendments remain valid.

Proposed amendments to Regulation No. 46 to align the text in the table in paragraph 15.2.1.1.1 (minimum number of mirrors) with the amendments to be introduced via the 04 series of amendments (document WP.29/2012/87).

Document WP.29/2012/87 is a GRSG proposal (04 series of amendments) to reduce the blind spot on the passenger side of N2 and N3 (medium/heavy commercial) vehicles under UN R46. This new proposal would clarify that prior approvals not impacted by the 04 series amendments remain valid.

Report of the 2–5 October 2012 session of the Working Party on General Safety.

Revised proposal prepared by the Informal Group on Camera-Monitor Systems to permit the replacement of all mirrors by camera-monitor systems, taking into account comments received during the 101st and 102nd GRSG sessions.

This submission from the International
Organization of Motor Vehicle Manufacturers (OICA) proposes to improve UN R107 provisions concerning the accessibility of pushchairs or prams in coaches and buses.

France submitted this proposal to clarify the provisions for bumpers of vehicle types complying with the performances requirements specified in the new UN Regulation on pedestrian protection. This document is based on informal document GRSG-101-24.

The European Association of Automotive Suppliers (CLEPA) proposes changes to the Dutch proposal (GRSG/2011/23) that would enable the replacement of mirrors by camera monitor systems. This document is based on informal document GRSG-101-03.

Japan submitted this proposal to clarify the
requirements of the Regulation on rear underrun protection devices. This proposal is based on informal document GRSG-101-10-Rev.1.

France submitted this document which modifies informal document GRSG-101-25.

The WP.29 secretariat submitted this proposal in order to update references to international standards in the UN R67.

The Czech Republic submitted this proposal to
clarify the provisions on resistance to ageing in the UN R67.

The Czech Republic submitted this proposal to
clarify the general test provisions in the Regulation, mainly those on fuel rail.

This proposal from Japan is a modified version of GRSG/2011/31, which was submitted for the purpose of preventing road accidents due to the inability of drivers of vehicles with an extremely high eye point to view small vehicles (e.g. motorcycles) in front.

This proposal aims at providing a simple solution applicable to all automatic functions, avoiding the repetition for all automatic systems of the exercise initiated with document GRSG/2011/06 for headlamps.

UN R107 requires the installation of driver seat with suspension systems. This IRU proposal, based on the earlier informal proposal GRSG-99-22, would exempt Class I urban buses from this requirement in UN R107.

Formal proposal from the European Liaison Committee of the Body and Trailer Building Industry (CLCCR) to ensure the lateral stability of a rearward facing wheelchair by restraint with a rigid device or with a flexible strap anchoring the wheelchair.

Series of amendments resulting from the work of the Informal group on Service Doors, Windows and Emergency Exits (SDWEE) to update and improve UN R107, including passenger entry/exit, driver compartments, passageways, use of signs, and emergency lighting.

Proposal from OICA to amend UN R46 in order to permit approvals of new generation “frameless” interior mirrors having no housing or holder. The current language assumes all mirrors are enclosed in housings and therefore excludes approval testing of these new-techology mirrors.

Proposal from the European Liquefied Petroleum Gas Association (AEGPL) to add values for the aerostatic pressure to be reached during the external leakage test of Class 0 components, in line with the provisions of paragraph 5.3.

Proposal from Germany to clarify the nature of approvals granted under UN R67 with respect to Class 1 and Class 2 hoses and their couplings (i.e., as hose assemblies or as hose and coupling pairs approved as separate components).

Proposal from AEGPL to revise the text proposed by Germany (GRSG/2012/18) (to clarify approvals of hoses and couplings) in order to preserve the possibility to type-approve flexible hoses separately and prior to hose assembly approval.

Proposal concerning Amendments 1 to 3 of UN R60 and UN GTR No. 12 to delete Annex 3 on special provisions for levers and Annex 4. The latter is replaced by Table 1 of the GTR containing the symbols identifying controls, tell-tales and indicators and definitions are carried over from the GTR.