Proposal from the Simplification of Lighting Regulations informal group to combine provisions of UN Regulations Nos. 4, 6, 7, 23, 38, 50, 77, 87 and 91 into a single regulation. This consolidation aims to streamline the administration and implementation of these lighting regulations while setting the foundation for a future shift towards performance-based approval requirements. This proposal restructures the existing body of lighting regulations without changing their content (e.g., technical requirements).

Proposal from the Simplification of Lighting Regulations informal group to introduce references to the three new simplified Regulations (Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD)) into the 03 series of Regulation No. 48.

Proposal from the Simplification of Lighting Regulations informal group to introduce references to the three new simplified Regulations (Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD)) into the 01 series of Regulation No. 53.

Proposal from the informal working group on the Simplification of Lighting Regulations to introduce the definition and general requirements for use of the “change index” established via the three new simplified Regulations on Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD).

Proposal from the Simplification of Lighting Regulations informal group to introduce references to the three new simplified Regulations (Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD)) into the 02 series of Regulation No. 53.

Proposal from the Simplification of Lighting Regulations informal group to introduce references to the three new simplified Regulations (Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD)) into the 01 series of Regulation No. 74.

Proposal from the Simplification of Lighting Regulations informal group to consolidate common definitions of terms concerning lighting, light signalling, retro-reflective devices and device installation into Regulation No. 48. (Definitions specific to particular devices would be maintained in the respective device regulations.)

Proposal from the informal working group on the Simplification of Lighting Regulations to delete definitions in UN R86 that are identical, and therefore redundant, to definitions in UN R48. Thus, UN R48 becomes the sole repository for common definitions across lighting installation and device regulations.

Proposal from the Simplification of Lighting Regulations informal group to introduce transitional provisions for the phasing out of the existing Regulations on lighting and light-signalling in conjunction with the introduction of three new simplified Regulations on Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD).

Proposal from the Simplification of Lighting Regulations informal group to introduce references to the three new simplified Regulations (Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD)) into the original series of Regulation No. 86.

Proposal from the Simplification of Lighting Regulations informal group to introduce references to the three new simplified Regulations (Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD)) into the 01 series of Regulation No. 86.

Proposal from the Simplification of Lighting Regulations informal group to introduce references to the three new simplified Regulations (Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD)) into the 04 series of Regulation No. 48.

Proposal from the Simplification of Lighting Regulations informal group to introduce references to the three new simplified Regulations (Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD)) into the 05 series of Regulation No. 48.

Proposal from the Simplification of Lighting Regulations informal group to introduce references to the three new simplified Regulations (Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD)) into the 06 series of Regulation No. 48.

Proposal from the Task Force on Electromagnetic Compatibility (TF-EMC) to align UN R10 with the vehicle narrow-band limit and the latest set-ups (artificial networks, harness location, Z-folding, …) for vehicles in charging mode under the International Special Committee on Radio Interference (CISPR) 12 Standard. The proposal also introduces additional details for vehicle in charging mode operating conditions (alternative or direct current charging).

Proposal from the informal working group on the Simplification of Lighting Regulations for a new UN Regulation on retro-reflecting devices (RRD) to supersede UN Regulations Nos. 3, 27, 69, 70, and 104.

Proposal from the informal working group on the Simplification of Lighting Regulations (SLR) for a new UN Regulation on Road Illumination Devices (RID) to supersede UN Regulations Nos. 19, 98, 112 (thus 1, 8, and 20), 113 (thus 56, 57, 72, 76, and 82), 119, and 123.

Proposal from the Task Force on Headlamp Switching to clarify requirements for electrical connections for headlamps, daytime running lamps, and related lighting devices.

Proposal to align the approval code for light sources approved according to Regulations Nos. 37, 99 and 128, with the approval number as prescribed by Revision 3 of the 1958 Agreement, schedule 4.

Proposal to require automatic switching from DRL to normal headlamp lighting as conditions warrant, amending the current UN R53 as well as the proposed new UN Regulation on light-signalling devices.

Proposal from the informal working group on the Simplification of Lighting Regulations to introduce the definition and general requirements for use of the “change index” established via the three new simplified Regulations on Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD).

SAE proposals regarding the proposal (document GRE-78-21/Rev.1) from the Task Force on Headlamp Switching to clarify requirements for electrical connections for headlamps, daytime running lamps, and related lighting devices.

Proposal to update the definition of “stop lamp” in order to allow the use of different stop lamp activation methods for powered two-wheelers as currently applicable for four-wheelers; e.g. by the application of a retarder or a similar device.

Proposal to align UN R50 and UN R53 regarding the inward geometric visibility requirements for rear position lamps.

Proposal to allow installation of exterior courtesy lamps on motorcycles by aligning the text with provisions on courtesy lamps in UN R48.

Proposal to clarify the text with regard to the activation of the direction indicators when the motorcycle engine in order to signal the vehicle status. The proposal would specify the purposes for which indicators may be activated:

1. To show the vehicle status (e.g. locking system) when the vehicle is parked;
2. To allow the driver to recognize the presence of his/her own vehicle from a certain distance by remote control;
3. In case of keyless entry system and of the driver having lost the key fob while riding – to inform the driver that he/she no longer has the key fob and that the vehicle will soon become unable to restart.

Under UN R112, a Class B lighting device that fulfills the requirements for Class A headlamps may be approved. However, UN R74 prohibits the use of Class B devices in this manner. Therefore, this proposal would remove the discrepancy and enable the installation of Class B devices approved under UN R112 as headlamps.

Proposal to require the installation of direction indicator lamps on mopeds.

Proposal to align the angle of visibility requirements for rear position lamps with the angle of visibility requirements for front position lamps. This proposal corresponds with a related proposal on Regulation No. 53 (GRE/2018/28).

Proposal from the SLR informal group to improve and correct the text of the three new simplified UN Regulations on LSD, RID and RRD.

Proposal from the SLR informal group to improve and correct the official documents to introduce references to the three new simplified UN Regulations on LSD, RID and RRD.

Proposal from the SLR informal group to improve the general requirements proposed in documents GRE/2018/16 and GRE/2018/18.

Proposal from the SLR informal group to introduce transitional provisions in documents GRE/2018/2, GRE/2018/3, and GRE/2018/4.

Proposal prepared by the SLR informal group in cooperation with IMMA in order to delete definitions in UN R74.01 made redundant because they already exist in UN R48. The aim of this proposal is to confirm UN R48 as the sole repository for common definitions used across all lighting regulations.

Proposal prepared by the SLR informal group in cooperation with IMMA to delete definitions in UN R53.02 made redundant because identical definitions already exist in UN R48. The aim of this submission is to confirm UN R48 as the repository for common definitions used across all lighting regulations.

TECHNICAL STANDARDS DOCUMENT: Standard No. 108, Revision 6- Lamps, Reflective Devices, and
Associated Equipment.

Regulations amending the Motor Vehicle Safety Regulations (Interpretation and Standards 108 and 108.1): SOR/2018-43.

EMC Task Force proposal to correct its earlier submission.

Proposal to add explicit references to indirect vision systems, blind spot systems, and accident emergency
call systems.

Proposal from the Headlamp Switching task force co-chairs to clarify the wording used in requirements related to functional electrical connections of lamps in document GRE/2018/22.

a) Proposal to amend UN R48 to clarify the DRL switching-off conditions (also aligning them with the existing switching-off conditions for front position lamps reciprocally incorporated with DI) and/or light intensity reduction when DRL and DI are totally or partially reciprocally incorporated and when their distance is equal or less than 40 mm.
b) Proposal to introduce into UN R87 the possibility of a supplemental verification and certification of the “reduced luminous intensity”, fulfilling the pertinent requirements in Regulation No. 48.

Proposal for a marking requirement for lamps to be approved under the LSD regulation. This proposal is to take care of specific concerns being observed in the marking of the combined lamps for identification, indication of particular series of amendment for each device and to take care of certain difficulties as seen in the proposal submitted by IWG-SLR document no GRE-78-35-Rev.1.

India comments on the proposal to align UN R10 with the vehicle narrow-band limit and the latest set-ups for vehicles in charging mode under the International Special Committee on Radio Interference (CISPR) 12 Standard.

Proposal for changes to document GRE/2018/19 proposing to require automatic switching from DRL to normal headlamp lighting as conditions warrant under UN R53 and the proposed new UN Regulation on light-signalling devices.

Proposal for changes to document GRE/2018/13 consolidating common definitions of terms concerning lighting, light signalling, retro-reflective devices and device installation into Regulation No. 48.

Proposal to a) improve the transitional provisions presented in GRE/2018/11 with regard to the collective
amendments to Regulations Nos. 3, 4, 6, 7, 19, 23, 27, 38, 50, 69, 70, 77, 87, 91, 98, 104, 112, 113, 119 and 123 and b) introduce new requirements into the 06 series of amendments to UN R48 with regard to the validity and installation of type approved lighting and light-signalling devices.

Comments on the proposal from Germany and Italy for the 07 series of amendments to UN R48 and for Supplement 20 to UN R87.

Discussion document from the Netherlands and Italy to serve presenting potential new requirements for headlamp levelling, in particular regarding the vertical inclination in relation to the dipped-beam headlamp mounting height. The proposal is based on the original proposal of the Informal Working Group on Visibility, Glare and Levelling (VGL) (informal documents GRE-78-23-Rev.1, GRE-78-32, GRE-78-36) and discussions during the GRE 78th session.

Proposal for changes to the draft Road Illumination Devices (RID) regulation.

Proposal for amendments to the draft text.

Because the new lighting device regulations (LSD, RRD, and RID) each cover multiple lighting functions (e.g. direction indicators, marker lamps, DRL in the LSD regulation), the potential exists for a change in stringency to impact some, but not all functions within the scope of each regulation. The change index is proposed in order to track the impact on each function and so restrict the need for new type approvals only to those functions impacted by a change in stringency.

Japan proposals, modified pursuant to discussions during the 79th GRE session, to improve human-machine interfaces and otherwise clarify elements in the Headlamp Switching Task Force proposal for the electrical connections of headlamps, daytime running lamps, and related lighting devices (documents GRE/2018/20 and GRE-78-21/Rev.1).

Proposal to define specifications for the design and operation of external status indicators for Vehicle Alarm Systems (VAS), Alarm Systems (AS) and immobilizers under UN R48 pursuant to provisions of UN R97 and R116.

Consideration of how lighting systems may evolve with vehicle automation, particularly in enabling signalling vehicle status and intentions to pedestrians (AVIP: Autonomous Vehicle Interaction with Pedestrians).

Recent amendments to the Canada Motor Vehicle Safety Standard (CMVSS) 108 allows UN Regulation
headlamps to be used on vehicles in Canada. CMVSS 108 specifically refers to the existing UN Regulations. In order to continue the acceptance of headlamps compliant with UN Regulations in Canada after the switch to the new Road Illumination Devices (RID) regulation, the current regulations should make clear references to RID before they are frozen and superseded.

Proposal to clarify paragraph 2.1 with regard to definitions: “All the definitions given in the latest series of amendments to UN Regulation No. 48 in force at the time of application for type approval shall apply, unless otherwise specified in this UN Regulation or in the pertinent installation UN Regulations Nos. 53, 74 and 86.”

Proposal to restore the definition of “device” (because the definition under UN R53 differs from that under UN R48) and to delete the definitions of “bend lighting”, “H plane”, “sequential activation” and “emergency stop signal” (because they are identical to the definitions in UN R48).

Recent amendments to the Canada Motor Vehicle Safety Standard (CMVSS) 108 allows UN Regulation
headlamps to be used on vehicles in Canada. CMVSS 108 specifically refers to the existing UN Regulations. In order to continue the acceptance of headlamps compliant with UN Regulations in Canada after the switch to the new Road Illumination Devices (RID) regulation, the current regulations should make clear references to RID before they are frozen and superseded.

Proposal from IWG SLR based on a proposal from the International Motorcycle Manufactures Association (IMMA) to amend the inboard visibility angle for rear position lamps in pairs in the new UN Regulation on Light-Signalling Devices (LSD).

SLR informal group removing the brackets around (i.e., confirming) the 24-month transition period for the switch to approvals only under the new LSD, RRD, and RID regulations and to delete the proposal that approvals and extensions of approvals granted under each regulation would remain valid indefinitely.

Proposal by the Co-Chairs of the Task Force on Headlamp Switching (TFHS) to update requirements for headlamps and daytime running lamps. In particular, the proposed 07 series of amendments aims to clarify electrical connection requirements, conditions for manual switching OFF of headlamps, and new definitions for switching ON/OFF and for activating/deactivating lamps.

Proposal from the Task Force on Electromagnetic Compatibility (TF-EMC) to align UN R10 with the vehicle narrow-band limit and the latest set-ups (artificial networks, harness location, Z-folding, …) for vehicles in charging mode under the International Special Committee on Radio Interference (CISPR) 12 Standard. The proposal also introduces additional details for vehicle in charging mode operating conditions (alternative or direct current charging).

Proposal to introduce the following changes into the draft new Regulation on light-signalling devices:

1. Use of LED substitute light source(s) is allowed and does not constitute a change of the lamp type. However, lamp performances shall be tested during type approval also with the LED substitute light source. Approval of the lamp using filament light source(s) is a prerequisite for approval of the lamp using LED substitute light source(s).
2. Testing with LED substitute light sources is exempted from conformity of production control.
3. The technical description shall include notice that the lamp also has to be approved with the LED substitute light source(s) according to UN R128 if the applicant has so determined.
4. The approval marking or the Unique Identifier as well as the category or categories of LED substitute light source(s) prescribed, if any, shall be visible.
5. The indication of both the holder of the filament light source and of its LED counterpart light source, if any, shall be explicitly provided.

Proposal to introduce requirements for light emitting diode (LED) substitute light sources into Regulations Nos. 48, 53, 74 and 86.

Proposal from the Task Force on Substitutes and Retrofits (TF SR) to introduce a new light emitting diode (LED) substitute light source category PY21W/LED. This proposal is a revised version of GRE/2017/17 and is part of a package which also includes amendments to UN Regulation No. 128.

Proposal to introduce requirements and test specifications for light emitting diodes (LED) substitute light sources, including to

1. introduce provisions for LED substitute light sources into Regulation No. 128;
2. introduce a new category sheet PY21W/LED based on LED technology into the Consolidated Resolution (R.E.5);
3. establish equivalence criteria as guidance for specifying sheets for LED substitute light source categories. (These guidelines are intended for publication, with the agreement of GRE, on the GRE website under “reference documents”, similar to criteria for new filament light sources for head lighting (GRE-77-04). In addition, these criteria are being prepared for insertion in publication IEC 60810.);
4. a draft proposal to IEC concerning the cap/holder system of the LED light source category PY21W/LED, for information to GRE (GRE-80-03) only, to show the interlock feature and the differences with the cap/holder system of its counterpart filament light source category PY21W.

Proposal from the SLR informal group to improve the text of the draft new UN Regulation on retro-reflecting devices (RRD). The proposal adds that the definitions in UN R48 apply unless the regulation or the vehicle-category-specific regulations (UN R53, 78, 86) specify different applicable definitions, to clarify that the construction provision and prohibition on use of paints or varnishes under paragraph 4.1.6 only apply to retro-reflectors, to correct the omission of Class F devices from the title of paragraph 5.4., and to add the water-resistance test (from UN R69 and R70) to Annex 7. The amendments, if approved, are intended to be considered with the original draft of the new Regulation sent to the November 2018 WP.29 for adoption (WP.29/2018/159).

Proposal to specify the use of UN R48 definitions unless otherwise specified in the current regulation or in lighting installation regulations for other vehicles categories (i.e., in UN R53, R74, or R86), to harmonize the Conformity of Production (CoP) provisions regarding the permitted re-aim angles for class A and B headlamps, and to harmonize Class C passing beam values. The SLR informal group intends for these changes, if approved, to be considered by WP.29 at its November 2018 session along with the original RID proposal (WP.29/2018/158).

Proposal to require installation of direction indicators on mopeds.

Proposal to introduce technical parameters for speed and vehicle distance in order to encourage reduced glaring effects from rear signaling lamps. The proposal allows for reduced intensity at speeds lower than 20 km/h.

Proposal from the Special Interest Group on L-category vehicle daytime running lamps to introduce requirements for automatic switching from DRL to headlamp(s) if the maximum luminous intensity of DRL is above 700 cd.

The current text of UN R128, Annex 4, paragraph 1.2. allows only for a decrease of luminous flux from 1 minute to 30 minutes. This has proven to be unnecessarily design restrictive as the drive electronics in a stabilized light source can lead to a slight increase in the luminous flux from 1 minute to 30 minutes. Therefore, this proposal would allow a limited increase of luminous flux from 1 minute to 30 minutes within the given minimum and maximum requirements. This proposal relates to document GRE/2018/48 retaining requirements for LR4 category light sources which would otherwise have been impacted by the present proposal.

Proposal to amend the light source category LR4. This proposal relates to document GRE/2018/49 proposing to amend UN R128 in relation to the 1 min/30 min ratio. The change to UN R128 would affect the requirements of the LR4 category which is not its intention. Therefore, the present proposal modifies the category sheet of LR4 in order to maintain the current requirements for the LR4 standard light sources.

Proposal to render optional the fitment of front position lamps where the motorcycle is fitted with qualified automatic headlamp switching or daytime running lamps.

Proposal to include provisions for exterior courtesy lamps on motorcycles under UN R53 (as is already the case for motor vehicles under UN R48).

Proposal to clarify conditions under which direction indicator lamps may be switched ON to indicate the status of the device to prevent unauthorized use.

Correction to document GRE/2018/35 to effect the deletion of the definitions for “bend lighting”, “H plane”, “sequential activation” and “emergency stop signal” in UN R53 (because identical in UN R48). The deletions were inadvertently omitted in the original proposal.

GRE and its Task Force on Substitutes and Retrofits proposed and GRE at its 79th session agreed to include an “interlock feature” for LED substitute light sources to prevent the misuse of these light sources. The first LED substitute category proposal is the “PY21W/LED”. A further solution has been developed by IEC cap-holder experts in IEC TC34/SC34B/WG2 by adding a “third pin” at an angle of 110° (from the reference pin) for the BA15 cap system, including the BAU15s cap prescribed for the PY21W filament light source category. This document contains the relevant cap and holder sheets for implementation in the IEC 60061 structure.

Guide for specifying LED substitute light source categories as equivalents for corresponding filament light source categories prepared by the Task Force on Substitutes/Retrofits.

EMC Task Force amendments to its original proposal.

Editorial corrections to the original document from the task force on headlamp switching.

Proposal to introduce requirements for the mandatory installation of emergency stop signals (ESS) on all categories of motor vehicles and trailers.

Proposal to amend the Headlamp Switching Task Force text aimed at updating requirements for headlamps and daytime running lamps.

European Commission and Japan joint position on the Task Force on Headlamp Switching (TFHS) proposal to introduce updated requirements for headlamps and daytime running lamps.

Request to GRE and the SLR informal group to give consideration to transitional provisions.

Proposal to delete the draft provisions that would limit the reduction of luminous intensity levels to conditions where the vehicle speed is below 20 km/h and the distance to the following vehicle(s) is less than 20 m.

Proposal to improve the text regarding LED substitute light sources. ( “If a LED substitute light source is approved to be used in a lamp installed on a vehicle type, a declaration shall be made in the communication form.”)

Proposal to require red retro-reflectors to identify the rear sides of a vehicle (presently not required for vehicles less than six meters in length).

Modification of Figure 1 (Example of allowed luminous flux behaviour of an approved LED light source under UN
Regulation No.128, Annex 4, paragraph 1.2.) to add the range after one minute and 30 minutes with a positive or negative “gradient”.

Initial proposal for discussion to introduce provisions to address risk of delayed response to a signal due to sun load impact on conspicuity.

India comments on the proposal for the 03 series of amendments to UN Regulation No. 53 and proposal for amendments to the draft new UN Regulation on Light-Signalling Devices (LSD)

Presentation in support of the proposal submitted by the Task Force on Substitutes and Retrofits (TF SR) which introduces requirements for the use of light emitting diode (LED) substitute light sources in the new LSD UN Regulation LED Replacement Light Sources.

Proposal to amend the inboard visibility angle for rear position lamps in pairs.

Proposal to apply a provision to L5 and L6 vehicles to ensure adequate attention to the testing boundaries for unbodied category L vehicles. IMMA is concerned about unbounded use of radio transmitters during riding because of the risk of distraction and to see immunity testing by means of an on-board transmitter simulation (per ISO 11451-3).