Proposal to clarify that only external status indicators as referenced in UN R97 and R116 are addressed under the proposal to define such external indicators and introduce performance specifications under UN R48 for Vehicle Alarm Systems (VAS), Alarm Systems (AS) and immobilizers (draft Supplement 18 to the 04 series, Supplement 11 to the 05 series and Supplement 9 to the 06 series of amendments to UN R48).

Proposal to amend Regulation No. 48 following the outcome of the 167th session of the World Forum where amendments to Regulations Nos. 97 and 116 on the status indicators for Vehicle Alarm System (VAS), Alarm System (AS) and immobilizer were adopted (WP.29/2015/87 and WP.29/2015/91). The proposal aims at defining and specifying the operation of the external status indicator for VAS, AS and the immobilizer.

Proposal to amend GRE/2016/33 and GRE-76-17 pursuant to discussions at the October 2016 GRE-76 session:

1. The direct reference to Regulations Nos. 97 and 116 that was included in GRE-76-17, para. 2.37. was removed based on the observation of the representative of Finland on a potential split, in the future, of some of the Regulations under the responsibility of GRSG.
2. In another remark from the representative of Finland, the word “indicator” that was missing in the last sentence of para. 2.37. in the text of the proposals GRE/2016/33 and GRE-76-17 has been added.
3. Based on the comments from the representatives of France, UK, Finland and Japan, the area of the apparent surface, mentioned in GRE/2016/33 and GRE-76-17, para. 5.30. (c) has been lowered from 50 cm² to 20 cm², in the case of one indicator is being installed on the vehicle. If two indicators are installed, the area of the apparent surface should not exceed 10 cm² per indicator.

Proposal to enable approval of side-marker and position lamps with regard to switching requirements when mutually incorporated. Vehicles include designs where lamps wrap around vehicle corners. In cases where optional side-marker lamps are grouped with a position lamp that is reciprocally incorporated with the direction indicator, it should be possible to switch off the side-marker lamp (as can be done with the position lamp) in order to improve conspicuity of the direction indicator.

The proposal also defines specifications for the design and operation of external status indicators for Vehicle Alarm Systems (VAS), Alarm Systems (AS) and immobilizers under UN R48 pursuant to provisions of UN R97 and R116.

The proposal also corrects and clarifies the following:

• para. 5.7.2.1. editorial alignment of text with current terminology
• replace undefined “effective outlet” terminology with defined “apparent surface” reference
• reintroduction of missing reference to “transverse plane” in paras. 5.10.1. and 5.10.2.
• para. 6.2.9. and related subsequent paragraphs to clarify the application of the 2000 lumen criteria
• para. 6.26.9.2. to correct a cross-reference with UN R23
• measurement of the minimum height in relation to the ground for dipped beam headlamps (para. 5.8.2).

Proposal to define specifications for the design and operation of external status indicators for Vehicle Alarm Systems (VAS), Alarm Systems (AS) and immobilizers under UN R48 pursuant to provisions of UN R97 and R116.

Proposal also to address inconsistencies, clarify text, and correct terminology in Regulation No. 48:

• para. 5.7.2.1. editorial alignment of text with current terminology
• replace undefined “effective outlet” terminology with defined “apparent surface” reference
• reintroduction of missing reference to “transverse plane” in paras. 5.10.1. and 5.10.2.
• para. 6.2.9. and related subsequent paragraphs to clarify the application of the 2000 lumen criteria
• para. 6.26.9.2. to correct a cross-reference with UN R23.