Proposal to define ocular points corresponding to a driver’s direct vision when checking rearward conditions from the driver’s seat.

AEGPL views on the proposal to align Regulation No.115 to the new WLTC test cycle, defined in the GTR 15 and in the Commission Regulation (EU) 2017/1151 and later modifications.

Proposal to enable the approval of the laminated-glass panes with improved mechanical properties, especially as designed for front, exterior, forward-facing glazing of the upper deck of a double-deck vehicle. This request follows the approval by GRSG of a similar amendment to UN R43 (document GRSG/2018/7) and therefore seeks to maintain the alignment between GTR 6 and UN R43.

Draft text updated pursuant to the June 7 VRU-Proxi informal group web conference.

Working draft proposal updated by Germany for the VRU-Proxi informal group for a new Regulation on uniform provisions concerning the approval of motor vehicles with regard to the Blind Spot Information System for the Detection of Bicycles

Proposal to correct Revision 2 of UN R55 to align with the text of Supplement 04 to 01 series of amendments. This proposal removes a subparagraph under paragraph 13.1 that should not have been included in the Revision.

Annex 1 of UN R55 concerns the type approval communication form. Item 9.3. requires information “For Class A mechanical coupling devices or components, including towing brackets”. Poland proposes to add “if applicable” to the description in order to avoid interpretations that brackets must be part of the approval (i.e., the approval may concern the coupling ball without additional attachments).

Proposal to introduce a generic drawing to clarify the requirements applicable to elements of windscreen wipers.

Proposal to expand the scope of the regulation on unauthorized L-category vehicle use to include electronic devices such as keyless entry systems, similarly to what already exists in UN R116 on passenger car use.

Proposal to insert type (item 1.1.) and pressure classification (item 1.2.) in the communication form (Annex 2B).

Proposal to amend geometrical criteria (dimensions and distances between lateral protection devices) and installation provisions for lateral protection barriers in order to improve their performance with regard to vulnerable road users. The proposal would

1. increase the maximum distance between lateral rails from 300 mm to 400 mm
2. redefine the limits for the lower edge from “550 mm above the ground” to definition via an isosceles triangle formed by lines drawn at 8° from the ground contact points of the vehicle tires intersecting at point “I” above the road surface where the maximum limit “I” is between 350-450 mm
3. define the upper edge as from 450 mm rather than 300 mm maximum from the vehicle structure or maximum height of the upper edge above the ground from 950 mm to 850 mm
4. update the horizontal static force requirement for lateral protection devices to 3 kN and the deflection under load criteria to 90 mm over the rearmost 250 mm of the device and 450 mm over the remainder of the device.

Proposal to clarify the positioning of lateral protection devices on central axle trailers