Proposed text to facilitate the administrative control of two-stage requirements introduced in the 03 series of amendment. The two levels of stringency in terms of the wrap around distance (WAD) boundary of the bonnet top test area will be approved and that may be identified only by the notice of approval in accordance with Annex 1, part 2.

Proposal aimed at developing measures/technologies by trailer manufacturers for a reduction of CO2 emissions.

Test prepared by the experts of the Informal Working Group (IWG) on hydrogen and fuel cell vehicles (HFCV), UN Global Technical Regulation No. 13, Phase 2 (GTR13-PH2) and proposes enhancement of the global harmonisation of the technical requirements of compressed hydrogen storage systems and vehicles equipped with them.

The proposal aims to introduce an optional (on the choice of the manufacturer) test procedure for frontal airbags in combination with rearward facing child restraint systems in the rear seat to demonstrate that no deactivation of the airbag is needed. The aim of the proposal is to promote new airbag technologies.

Text to clarify the procedure and the characteristics of the measuring device used for the compliance test for the vehicle exhaust system.

Text to clarify how the assessment of the connection of the Safety-belt reminder system in case of removable seats has to be done.

Proposal to amend document GRSP/2022/4 concerning provisions for Adjustable Ride Height Suspension Systems (ARHSS). This proposal supersedes the previous proposals in documents GRSP-67-07, GRSP-68-18 and GRSP-70-17.

The proposed test makes a few minor adaptations and clarifications to the existing requirements.

Collective amendments to UN R94 (Frontal collision), UN R95 (Lateral collision) and UN R137 (Frontal Impact with focus on restraint systems). Aim of this document is, to clarify, if it was the intention of Informal Document GRSP-66-32 to delete paragraph 7.1.2.1. to 7.1.2.2.2. If it was the intention to delete these paragraphs, do we still need the simplified test described in Annex 7 of the Regulation?

Presentation on the development of an amendment

Proposal from the DPPS informal group to introduce specifications for deployable pedestrian protection systems. Proposal includes tentative bracketed text pending further informal group discussions.

Proposal to introduce new requirements for safety-belts of seat positions equipped with the lower ISOFIX anchorage to address safety-belt slippage up to the neck and submarining in ISOFIX-attached child booster seats.

Proposal to introduce new requirements to address vehicles equipped with Adjustable Ride Height Suspension Systems (ARHSS).

Proposal to correct editorial mistakes in the adopted text of the Regulation.

Proposal to correct editorial errors in the adopted text of the Regulation.

Proposal to correct editorial errors in the adopted text of the Regulation.

Proposal to clarify the requirements for monitoring the chest deflection of the Q10 dummy and for the correct measurement of the location of the thoracic spine.

Proposal to amend the existing procedure that measures the prescriptions of the minimum sitting height for booster cushions.

Proposal for specifications for the Construction, Preparation and Certification of the 50th percentile male Biofidelic Rear Impact Dummy (BioRID-II UN) anthropomorphic test Device.