Submitted by Germany proposing to update the Conformity of Production requirements (CoP).

Submitted by Germany proposing to update the Conformity of Production requirements (CoP).

Submitted by Germany to update the Conformity of Production (CoP) requirements.

Submitted by Germany in order to update the Conformity of Production (CoP) requirements.

Submitted by Germany in order to update the Conformity of Production (CoP) requirements.

Submitted by Germany in order to update the Conformity of Production (CoP) requirements.

Submitted by Germany in order to update the Conformity of Production (CoP) requirements.

Submitted by Germany in order to update the Conformity of Production (CoP) requirements.

Submitted by Germany in order to update the Conformity of Production (CoP) requirements.

Submitted by Germany in order to update the Conformity of Production (CoP) requirements.

Submitted by Germany in order to update the Conformity of Production (CoP) requirements.

Submitted by Germany in order to update the Conformity of Production (CoP) requirements.

Submitted by Germany in order to update the Conformity of Production (CoP) requirements.

Submitted by Germany in order to update the Conformity of Production (CoP) requirements.

Submitted by Germany in order to update the Conformity of Production (CoP) requirements.

Submitted by Germany and based on informal document GRE-68-30, proposing to delete the exemption for category M1 and N1 vehicles from the requirement for a minimum distance between the inner edges of two adjacent lighting surfaces.

Proposal to amend document GRE/2013/18 (on aligning UN R48 with UN R112) and establishing limits for minimum and maximum voltages values.

Proposal to clarify the Conformity of Production requirements.

Proposal to clarify the Conformity of Production requirements.

Proposal to amend UN R48 in order to enable type-approval of direction indicators with variable apparent surfaces.

Revised proposal from France and Germany to introduce provisions for direction indicator lamps with variable apparent surfaces. This document supersedes document GRE/2013/13.

Proposal to introduce requirements to avoid intentional non-approved (voltage) variation of the principal passing beam, using halogen light sources and to harmonize them with the operating voltage requirements in UN Regulation No. 48. This document supersedes document WP.29/2013/18.

Proposal to correct the text by replacing the erroneous use of the term “principal passing beam” with the correct term “class C (basic) passing beam”.

Proposal to introduce requirements to avoid intentional non-approved (voltage) variation of the passing and driving beam, using halogen light sources and to harmonize it with the operating voltage requirements in Regulation No. 48.

Proposal to delete the references to headlamps of Class B of Regulation No. 113 from Regulation No. 53, because of the poor performance of these headlamps when installed on the category L3 vehicles.

Proposal to introduce flashing side marker lamps for vehicles of categories M2, M3, N2, N3, O3 and O4 with the objective of improving the safety of vulnerable road users by informing them about the intended turns of buses and heavy goods vehicles and their trailers.

The Working Party on General Safety (GRSG) has approved a proposal to require the automatic activation of hazard warning lights in buses and coaches in the event of excess temperatures in the engine and/or other compartments. This proposal would align UN R48 with this new requirement so a complete set of amendments can be presented for adoption at the March 2015 session of the World Forum.

Proposal to include end-outline markers as an aid in the use of indirect vision devices (i.e., UN R46) for long commercial vehicles within the regulation.

Proposal to delete references to UN R113 Class B headlamps from the regulation.

Proposal to clarify the requirements with regard to daytime running lamps and direction indicators in order to prevent DRL from masking or otherwise interfering with the visibility of the direction indicator lamps. Germany believes that the current text produces different interpretations with different results that risk degrading vehicle safety.

Proposal to amend Regulation No. 48 following the outcome of the 167th session of the World Forum where amendments to Regulations Nos. 97 and 116 on the status indicators for Vehicle Alarm System (VAS), Alarm System (AS) and immobilizer were adopted (WP.29/2015/87 and WP.29/2015/91). The proposal aims at defining and specifying the operation of the external status indicator for VAS, AS and the immobilizer.

Proposal to allow under specified conditions the use of logos inside the illuminating surface of a signalling lamp.

Proposal to introduce requirements for testing the sun load impact to avoid delays in the perception of light signals under certain sunlight conditions.

Proposal to introduce provisions:

1. For vehicles intended for use by the armed services and forces responsible for maintaining public order: the manual switching off of all lighting devices in all circumstances;
2. In the absence of a “vehicle door assistance and warning system”: the mandatory application of the hazard warning lights to reduce the safety risks in the case a door is opened to the traffic side.

Proposal to allow the manual switching off all lighting devices in all circumstances for vehicles intended for use by the armed services and forces responsible for maintaining public order.

Proposal to introduce requirements for testing the sun load impact, which can delay the perception of a signal in such a way that it may became a serious safety issue, if the sun load impact goes above a defined ratio.

Proposal to allow the use of logos inside the illuminating surface of a signalling lamp under certain conditions.

Proposal to allow the use of manufacturer logos in the internal structure of optical components and/or in the outer lens within the apparent surface of a signalling lamp.

Proposal to allow the use of manufacturer logos inside the illuminant surface of a signalling lamp.

Proposal to allow the use of manufacturer logos inside the illuminant surface of a signalling lamp.

Proposal to clarify the requirements for the installation of the foremost side-marker lamp of 3 m from the front, which cannot always be achieved in case of semi-trailers.

Proposal to improve road safety for motorcycles by deleting of Class A and Class BS headlamps.

Proposal for text, during operation of a vehicle, to make it not be possible to switch from one colour to another, because this may lead to confusion of other road users.

Proposal to introduce provisions concerning automated driving systems and driver support features based on terms “driving system” and “driving mode”.

Proposal to limit headlamp classes in UN R53 and to ensure compatibility with the electric propulsion systems.

Proposal to introduce provisions for magnetically attached special warning lamps.

Proposals to introduce provisions for adaptive front lighting systems (AFS) for motorcycles.

Proposal to enable the approval under UN R74 of a front and rear indicator that can be activated simultaneously, to allow the installation of optional direction indicators at national level on bicycles (including vehicles with a maximum design speed not exceeding 25 km/h), and to introduce a new symbol “-“ under UN R148 between the symbols indicating the functions of the device in order to differentiate a device which fulfils the requirement of a front indicator of category 11 and a rear indicator of category 12 that cannot be activated simultaneously from one that can.

Proposal to clarify that only light-signalling devices may incorporate an illuminated logo.