Editorial clarification of the proposed transitional provision from the WP.29 secretariat..

Pursuant to GRPE work on vehicle propulsion system definitions (VPSD informal group; see document WP.29-165-17), this proposal would update the definition of the acronym “REESS” to refer to “rechargeable electrical energy storage system” across the passive safety regulations and currently proposed texts that make use of this acronym. (REESS had previously referred generically to “rechargeable energy storage systems”.)

Proposal to modify the reference to Annex 14 on simplified test methods to refer to “the use of a reference chest speed measured at 300 mm forward displacement carried out in a test”.

Updated document including comments received from Germany, Japan, the Russian Federation and the United States of America.

Proposal to introduce provisions to prevent the unintentional opening of side doors with rear-mounted hinges while the vehicle is in motion.

In response to a request during the December 2014 GRSP session to resume discussions on helmet safety and electric bikes, the secretariat has prepared this background note.

Proposal to add missing Integral fixtures for Regulation 129. Fuller explanation can be found in document GRSP-57-09.

Proposal to add missing Integral fixtures for Regulation No. 129. Fuller explanation can be found in document GRSP-57-09.

Proposal to clarify what is and what is not permitted on airbag labels in order to address deviations encountered in current labeling.

OICA comments and concerns regarding the generally accepted proposal for the definition of the bumper test area for use with the Flex-PLI lower leg impactor. The document raises issues concerning limitations of the test procedure and notes that the new requirements would have a significant impact on bumper design such that the transitional period for implementation should be 2019 to allow for a full vehicle development cycle.

Formal proposal as generally agreed during the 56th GRSP session to revise the procedure for determining the bumper test area under the pedestrian safety regulation. This proposal corrects shortcomings in the current definitions which could lead to a narrower test area than intended (leading to less effective pedestrian protection). This proposal includes a “bumper beam” determination method. The proposed changes also require the form of a new series of amendments (rather than a Supplement) and proposes a transition date of 1 September 2019 (rather than the previous 2017).

The proposal also includes a September 2017 transition date in the event that the GRSP determines that the proposal should be treated as a new series of amendments rather than as a Supplement.

Proposal to allow the installation of different light colours on seat-belt buckles to improve visibility. The proposal also addresses the alignment of ambient light designs in modern cars with the functional element of an occupant protection device to support its visual exposition in the vehicle compartment. This document supersedes GRSP/2015/15.

Further refinements from the European Commission to the proposal to amend the bumper test area procedures under the pedestrian safety GTR.

Proposal to amend document GRSG/2015/8 which would revise the procedure for determining the bumper test area under the pedestrian safety regulation.

Proposal to require seat-belt reminders for all seating positions, including rear positions, and to clarify the scope of the regulation.

Proposal to improve the belt routing and positioning of the universal child restraint system seat fixture during testing.

Status report on the development of a global technical regulation to address high voltage electrical safety in electric vehicles and their components (such as recharging inlets and rechargeable electric energy storage systems (REESS)). The draft regulation especially concerns flammable electrolytes and covers both in-use and post-crash environments.

Revised version of the proposal (formal document GRSP/2015/9 ) to extend the scope of UN Regulation No. 129 to include non-Integral child restraint systems (“Universal Booster” or “Specific to vehicle Booster”). This version includes all corrections to the text made by the Informal Working Group on Child Restraint Systems through it 6 May 2015 session.

Revised amendment, including track changes, to introduce all the modifications needed in UN Regulation No. 129 (Enhanced Child Restraint System (ECRS)) that were suggested by the experts of the informal working group on Child Restraint Systems (IWG CRS) to extend the scope of this Regulation to Non-Integral child restraint systems (“Universal Booster” or “Specific to vehicle Booster”) (Phase 2 of the UN Regulation).

Request for clarification concerning head restraint testing configurations.

Companion presentation to the proposal contained in document GRSP-57-17.

Text prepared the European Association of Automotive Suppliers (CLEPA) to clarify the provisions for dynamic testing of rear seat systems, advanced restraint system approval and transitional provisions. It supersedes document GRSP/2015/4 and GRSP/2015/16.

Text prepared by the Informal Working Group on Frontal Impact (IWG FI) as an outcome of discussions of the Working Party on Passive Safety (GRSP) at its fifty-seventh session on developing a separate new Regulation on frontal impact focusing on requirements for restraint systems.

Justification of submissions GRSP/2015/20 and GRSP/2015/29 (proposals to introduce an integral fixture for lateral (lie flat, carry cot) child restraint systems).

Correction of a typo in the test speed of the Russian-language version of the regulation. The text should read 56 km/h rather than 50.

Proposal to align the definition of “i-Size” child seating used in the two regulations.

Further refinements to the formal proposal to amend UN R129 with regard to non-integral CRS. This informal document effectively updates the formal proposal in GRSP/2015/24.

Updated proposal from the CRS informal group to introduce phase 2 amendments related to the booster-seat CRS category (booster seat with backrest) into UN R129. This informal document effectively supersedes the formal proposal in GRSP/2015/31.

Proposal to strip ISOFIX CRS provisions from UN R44 and to cease all new type approvals for CRS under UN R44 from November 2016 in deference to UN R129 on Enhanced CRS.

Status report on the development of global technical regulations addressing the safety of electric vehicles.

Australian proposal to adapt UN R14 to current Australian child restraint system anchorage requirements within the context of enabling the use of UN R14 within the international whole vehicle type approval system.

Australia wishes to accept the new full-width rigid barrier crash test regulation (expected as UN R137) as an alternative to its ADR 69/00; however, Australia wishes to avoid possible confusion over the use of an airbag deactivation device (such as used to turn off an airbag when a child seat is used in the front seat). Therefore, Australia proposes to clarify the provisions of UN R16 to avoid misunderstandings or misuse of such devices along the lines of requirements found in Euro NCAP and US FMVSS 208.

Proposal to simplify the UN R16 consumer handbook information pursuant to discussions on the development of UN R129 on enhanced child restraint systems.

Proposal to amend the toxicity and flammability declarations via references to EN71 (European safety standards).

Proposal to correct a reference in UN R134, Annex 3, paragraph 3.4. The reference to paragraph 6.2.2.2. was transposed from GTR No. 13; however, it ostensibly refers paragraph 2.2 of Annex 3 in UN R134.