Proposal to amend Regulation No. 48 following the outcome of the 167th session of the World Forum where amendments to Regulations Nos. 97 and 116 on the status indicators for Vehicle Alarm System (VAS), Alarm System (AS) and immobilizer were adopted (WP.29/2015/87 and WP.29/2015/91). The proposal aims at defining and specifying the operation of the external status indicator for VAS, AS and the immobilizer.

Motorcycle daytime running lamps (DRL) can cause glare under nightime conditions (i.e., if left activated after sunset). Therefore, this proposal would require automatic switching from DRL to normal headlamp lighting as conditions warrant.

Supplement 3 to the 01 series of amendments to UN R 98, 112, and 123 deleted the measurement point HV from the photometric requirement table. The HV measurement point, however, remains a requirement for checking photometric stability. This proposal removes the HV measurement point from the photometric stability requirements for the passing beam. The HV measurement point remains a valid for the driving beam.

During its 69th session, GRE adopted proposals to update the Conformity of Production (CoP) procedures for lighting and light-signalling devices, but decided to await the work of a GTB task force on the simplification of CoP provisions for AFS before addressing UN R123. This proposal amends the CoP procedures in line with those agreed for UN R112 (document GRE/2013/37) to create simplified photometric CoP tables for each class (C, V, W, E, R, RADB) with its applicable 0/20/30 per cent limits. Furthermore, the task force clarified which tests are necessary for CoP testing and which are necessary only for type approval testing. The methods and requirements for the “initial” type approval remained unchanged. An overview of the main AFS characteristics can be found in documents GRE-48-28 and GRE-48-30.

The current requirements on light source failure in lamps equipped with multiple light sources differ across UN Regulations. GTB submitted and then withdrew a proposal to align these requirements (GRE/2016/13). This updated proposal improves upon the text of the previous proposal to refine the requirements for lamps equipped with several light sources, including in systems fitted with an operating tell-tale that indicates the failure of any one of these light sources. In the case of failure of any one light source in a single lamp containing more than one light source, either the light intensity must comply with the minimum intensity required in the table of standard light distribution in space or, for lamps used in systems where a tell-tale indicates the failure of any one of the light sources, the light intensity in the axis of reference must be at least 50 per cent of the minimum intensity required.

This collective amendment extends the usage of LED light sources of UN R128 to front lighting Regulations Nos. 19, 98, 112, 113 and 123 (as presented in the previous session document GRE-75-14). The proposal would allow for the use of regulated replaceable LED light sources according to Regulation No. 128 in all applications where the use of LED modules is already permitted.

Correction of the proposal to amend Regulation No. 48 following the outcome of the 167th session of the World Forum where amendments to Regulations Nos. 97 and 116 on the status indicators for Vehicle Alarm System (VAS), Alarm System (AS) and immobilizer were adopted (WP.29/2015/87 and WP.29/2015/91). The proposal aims at defining and specifying the operation of the external status indicator for VAS, AS and the immobilizer.

India comments on the proposal to enable the approval of sequential activation of light sources of direction indicators lamps for motorcycles.

Correction to the proposal for a collective amendment to Regulations Nos. 7, 23, 38, 48, 77, 91 and 119. Since the cornering lamp projects a beam to the left and right of the reference axis, it is not relevant to check the photometric values in the reference axis (HV). Therefore, the test point at 2.5°D, 45°L or R shall be used.

Proposal to amend the draft text concerning sequential activation of direction indicators. The amendments aim to ensure reasonable uniformity across direction indicators in order to reduce the risk of misinterpretation by other road users. The modifications proposed by the France replace the terms “apparent surface” and “continuous” with specific objective criteria.

The justification for changes to sub-paragraphs 5.6.(e) of Regulation No. 6 and 6.8.(e) of Regulation No. 50 is missing from document GRE/2016/20. The Task Force on Sequential Activation of direction indicators wishes to note that the paragraphs were proposed by GTB and accepted by the Task Force to clarify the text without changing the current technical requirements.

Exchange of communications between the secretariat and the UN Office of Legal Affairs concerning the simplification of lighting and light-signalling Regulations (SLR). GRE proposed to consolidate around 30 Regulations on different individual lighting and light-signalling devices (lamps) into three new Regulations (forward lighting, light-signalling, and retro-reflective devices). OLA provides general comments in response to GRE questions intended to ensure that the selected approach respects the legal and administrative requirements of UN treaties and specifically the 1958 Agreement.

Advances in LED lighting raise the prospects for incorporation of lighting into rear registration plates. In 2004, in response to a proposal for the regulation of such plates under UN R48, GRE determined that illuminated plates were not lamps and therefore were outside the scope of UN R48. The Spanish delegation would like to submit this issue again for the consideration of GRE members in order to have a coordinated and common view on this subject.

Proposal to update document GRE/2016/34. At the 73rd GRE session, France proposed to delete a design restrictive requirement (GRE/2015/22 and GRE-73-26). This proposal received comments from Germany and the Netherlands. Poland suggested a different approach on this issue (GRE-73-21). The Chair invited France, Germany, Netherlands, Poland, CLEPA and IEC to prepare a revised proposal for the next session. Based upon the approach proposed in GRE/2015/22 and GRE-73-26, GTB has investigated the specification of minimum levels of flux projected in critical zones of the passing beam distribution. This approach offers a technology-neutral performance based requirement. The result of the GTB study is to propose minimum projected flux requirements in two zones:
a) 15°D-1°U/30°L-30°R to ensure overall adequate illumination of the road and
b) 3.5°D-1°U/30°L-30°R to ensure sufficient range.

The collective amendment presented in GRE/2016/34 extends the usage of LED light sources of UN R128 to front lighting Regulations Nos. 19, 98, 112, 113 and 123. The introduction of LED light source categories under UN R128 for forward lighting applications (front fog, low beam, high beam,
AFS) is planned for 2017. This presentation explains the plans, timeline, and dependencies GTB proposes to address through the collective amendment, especially within the context of the simplification of lighting regulations program.

Proposal to clarify that only external status indicators as referenced in UN R97 and R116 are addressed under the proposal to define such external indicators and introduce performance specifications under UN R48 for Vehicle Alarm Systems (VAS), Alarm Systems (AS) and immobilizers (draft Supplement 18 to the 04 series, Supplement 11 to the 05 series and Supplement 9 to the 06 series of amendments to UN R48).

Analysis raising concerns regarding the proposal to establish photometric requirements for Class B1 based on average real performance of present Class B (halogen/LED) without reference to design specifications such as the luminous flux of light source.