Proposal to amend the transitional provisions.

Proposal for changes to the draft provisions to define switching conditions for dipped beam and daytime running lamps (DRL) and the variable intensity of rear lamps in conjunction with traffic conditions.

For a more efficient discussion during the 83rd session of GRE the experts from the International Organization of Motor Vehicle Manufacturers merged documents GRE/2020/08-Rev.1 (SLR) and GRE/2020/23 into one document.

Presentation to support the proposal

Proposed changes per discussions during the 84th GRE session.

Proposal to introduce the use of all of the direction-indicator lamps in case the presence of an unattended child is detected inside the passenger compartment.

Revised proposal to permit the use of very small logos on signalling lamps.

Proposal to align UN R48 from the 03 to the 08 series of amendments with 01 series of amendments to UN Regulations Nos.148 and 149.

Proposal to align the draft 09 series of amendments of UN R48 with 01 series of amendments to UN R148 and R149.

Comments on the proposal to delete the 2m width requirement for parking lamps.

Proposal to clarify provision that direction-indicator lamps on one side of a vehicle shall be switched ON and OFF automatically.

Proposal to amend the proposals concerning manufacturer logos.

Proposal clarifies the “Manufacturer logo” means a light emitting graphic mark, emblem, word, or combination of those elements used to aid public identification of a vehicle manufacturer’s brand name when the function is switched ON. Improved justification for the proposal

Paper introduces an ADS marker lamp to identify vehicles operating with an Automated Driving System. Industry does not seek to mandate such a lamp. It identifies safety and security concerns including no demonstrated real-world net safety benefit, targeting and public violence risks, cargo robbery risks, child safeguarding concerns, cyber-physical attack surface expansion, and spoofing and misuse potential.

Proposal provides an alternative proposal to GRE/2024/12 Revision 2 as amended by GRE-93-28 Revision 1 .

Proposal to allow cornering lights to remain on as long as the vehicle speed does not exceed 10 km/h as a measure to improve visibility during slow manoeuvres.

Proposal to amend Regulation No. 48 following the outcome of the 167th session of the World Forum where amendments to Regulations Nos. 97 and 116 on the status indicators for Vehicle Alarm System (VAS), Alarm System (AS) and immobilizer were adopted (WP.29/2015/87 and WP.29/2015/91). The proposal aims at defining and specifying the operation of the external status indicator for VAS, AS and the immobilizer.

Correction of the proposal to amend Regulation No. 48 following the outcome of the 167th session of the World Forum where amendments to Regulations Nos. 97 and 116 on the status indicators for Vehicle Alarm System (VAS), Alarm System (AS) and immobilizer were adopted (WP.29/2015/87 and WP.29/2015/91). The proposal aims at defining and specifying the operation of the external status indicator for VAS, AS and the immobilizer.

Proposal to improve requirements linked to the manual levelling device.

Proposal to reinstate the word “or” in para. 5.21.1. unintentionally removed during amendments.

Proposal to allow logos smaller than 5 cm² on the surface of lighting devices.

Proposal to introduce longer transitional provisions for heavy commercial vehicles and trailers

Proposal to delete the 2m width requirement for parking lamps.

Proposal to permit the installation of an optional rear-mounted manoeuvring lamp.

Proposal to prohibit the inclusion of a manufacturer logo in headlamps under UN R149 and to limit the approval of light-signalling devices with a logo to the 01 series of amendment of UN R149 under UN R48.

Proposal to clarify the requirements for the activation of direction-indicator lamps to ensure compatibility with driver control assistance systems as permitted under UN Regulation No. 171.

Proposal to clarify manufacturer logo requirements across several paragraphs: confirming that non-illuminated graphic marks are not considered logos (para. 2.1.7.); permitting vehicle manufacturers to keep the inner portion of a front position lamp active when an AFS headlamp substitutes the outer portion (para. 5.12.1.4.); improving logo language for Light Signalling Devices approved to UN R148 (para. 5.30.1.); and clarifying that Road Illumination Devices approved to UN R149 shall not include a manufacturer logo (para. 5.30.2.).