Proposal to maintain consistency between UN R49 and UN R83 in light of amendments to the 06 and 07 series of UN R83.

Proposal to introduce new provisions to accommodate type-approval of hydrogen Type 1A dual fuel engines and vehicles, modifications to include Fourier Transform Infrared (FTIR) and Quantum Cascade Laser (QCL) instruments, new provisions to accommodate monitoring on-board fuel and/or energy consumption during PEMS testing, and to amend for consistency between UN R49 and UN R83 in light of amendments to the 06 and 07 series of UN R83.

Proposal to update requirements for dynamometer preparation before a Type 6 test by aligning UN R83 with the relevant text of Annex 13 of GTR 15.

Proposal to update requirements for dynamometer preparation before a Type 6 test by aligning UN R83 with the relevant text of Annex 13 of GTR 15 and to allow the type approval of vehicles that previously were only within the scope as an extension based on their reference mass.

Proposal to update requirements for dynamometer preparation before a Type 6 test by aligning UN R83 with the relevant text of Annex 13 of GTR 15 and to allow the type approval of vehicles that previously were only within the scope as an extension based on their reference mass.

Proposal to update requirements for dynamometer preparation before a Type 6 test by aligning UN R83 with the relevant text of Annex 13 of GTR 15, to add engine capacity to the information document and to make editorial corrections.

Proposal to:

• Improve the positioning of pure Class I monitors for drivers with presbyopia (difficulty in clearly seeing close objects)
• Introduce installation requirements for surveillance mirrors and surveillance camera-monitor-recording devices
• Allow for single approval number for devices with more than one field-of-view
• Refine obstruction provisions
• Introduce provisions for rounding of magnification factors
• Introduce a new definition for “Surveillance camera-monitor-recording device”
• Clarification of the “external original surface” concept
• Clarification that the radius of curvature is not be mandatory on the back of Class I mirrors
• Allow greater flexibility in conducting the pendulum testing
• Clarify the “operation readiness” with respect to partially folded camera wings
• Allow for alternatives to the test defined in annex 7 for evaluating the radius of curvature on the reflecting surface if needed
• Correct certain errors.

Proposal to amend the minimum height (clearance distances) of lateral protection devices for vehicles with longer distance of axle and to amend the transitional provisions to exempt Contracting Parties that apply UN R73 on or after the entry into force of the 02 series from the obligation to accept approvals granted in accordance with paragraph 11.11. of the Regulation.

Proposal to improve accessibility of vehicles of categories M₂ and M₃, class I.

Proposal to extend the use of digital keys to L category vehicles.

Proposal to correct paragraph 5.1.3.7. to read: “5.1.3.7. Hydrogen fuel cell vehicles.” (rather than “hydrogen and fuel cell vehicles”).

Proposal to clarify that indicators, their identifications, and the identifications of controls need not be illuminated when the driver intentionally deactivates illumination and the electric vehicle is not in driving conditions.

Proposal to clarify provisions referring to the “vehicle master switch”. After a battery-off (circuit disconnection) event, some vehicle settings may turn to a default setting that is not the last setting. The proposal introduces an exemption applicable to FVA systems in such “system reset” cases.

Proposal to correct and clarify the existing provisions. The proposal aims to allow Category HT and X special warning lamps emitting light in different colours in the same manner as Category T.

Proposal to introduce provisions enabling the approval of reversing light projections (projection of patterns on the road).

Proposal to clarify marking and Conformity of Production provisions.

Proposal to delete the 2m width requirement for parking lamps, to allow the installation of side-marker lamps combined with retro-reflectors on the lateral foremost position on semi-trailers, and to enable the approval of reversing projections (projection of patterns on the road).

Proposal to delete the 2m width requirement for parking lamps, allow the installation of side-marker lamps combined with retro-reflectors on the lateral foremost position on semi-trailers, and to introduce provisions for reversing projections (projection of patterns on the road).

Proposal to delete the 2m width requirement for parking lamps, to allow the installation of side-marker lamps combined with retro-reflectors on the lateral foremost position on semi-trailers, and to enable the approval of reversing projections (projection of patterns on the road).

Proposal to correct the numbering within paragraph 4.11. and to clarify the CoP provisions in Annex 8.

Proposal to remove the prohibition on use the Unique Identifier per the WP.29 decision to change the default application of the UI from a requirement (requiring prohibition in cases where UI does not apply) to a permission (requiring an affirmative statement that UI may be used under a Regulation) and to allow the use of talcum for the dust resistance test as an alternative to dry quartz.

Proposal to correct the moment of inertia of the femur and the tibia of the flexible lower legform impactor in UN R127 to align with GTR 9 and Addendum 3 to MR1.

Proposal to correct para. 6.2.5.1. (seat inertia forces) to specify application of UN R14 (not “this Regulation” as erroneously copied) for the anchorage load tests.

Proposal to correct para. 6.2.5.1. (seat inertia forces) to specify application of UN R14 (not “this Regulation” as erroneously copied) for the anchorage load tests.

Proposal to add the Regulation number in the introduction section (i.e., replace “Regulation No. XXX” with “Regulation No. 174”) and correct an editorial error in paras. 2.4., 5.2.3.1., 5.5.1., 5.6.2.4., and 5.6.2.5. The term “master control switch” should read “vehicle master control switch”.

Proposal to ensure that vehicles exhibiting functionality meeting the definition of ACSF-B2 or -E are required to comply with the correct series of R171.

Proposal to adapt the resolution on vehicle categories and definitions for application to ADS vehicles.

Proposal to delete the Declaration of Conformance, amend Unique Identifier to reflect its optional use, and update Regulations integrated into IWVTA.