Draft text prepared by the informal working group on Periodical Technical Inspections for a new special resolution to establish definitions and minimum requirements for the execution of inspections according to UN Rules under the 1997 Agreement.

Q&A informational document on the new version of the 1958 Agreement, prepared by the informal working group on IWVTA.

Proposal for improving the efficiency of WP.29 sessions through the designation of agenda items as “A-points”. A-points would be recommended for approval as a block. This would not change the voting procedure, but would reduce the time devoted to considering proposals during the session prior to the vote. Items considered as A points might fulfill attributes such as:

1. the proposal does not establish a new Regulation;
2. the amendment does not create the starting point of a new series of amendments;
3. there was no dissent during discussions at GR level;
4. the amendment does not contain substantial elements;
5. the amendment is a series of parallel amendments within a Regulation (e.g. different series of amendments);
6. the amendment is a series of parallel amendments to a number of Regulations (e.g. introducing the term REESS).

Note from the WP.29 secretariat to raise awareness of the need for harmony between WP.29 regulations and ITU recommendations or other standards involving mutual recognition.

Taking account of the objectives of the Decade of Action for Road Safety and the Sustainable Development Goal 3.6 on road safety, the UNECE secretariat together with the UNSG’s Envoy for Road Safety worked on consultations on possible industry self-commitment on minimum safety.

Spreadsheet model for energy consumption calculation developed by the informal working group on Electric Vehicles and the Environment.

Status report of Part A of the November 2014 mandate for the Electric Vehicles and the Environment Informal Working Group.

Proposal to clarify the concepts of options, modules, and alternatives in the special resolution to improve the functioning of the 1998 Agreement.

Presentation on Euro NCAP crash testing of very light passenger cars ( ≤ 350 kg or ≤ 550 kg).

Document prepared by the WP.29 secretariat to provide a consolidated updated version of the proposed Revision 3 to the 1958 Agreement. The secretariat anticipates a decision by the World Forum to seek unanimous agreement on this proposed final text during its March 2016 session.

In response to concerns that approval agencies may not grant manufacturers the additional 1dB for L(wot) on conformity of production tests as changes had been made to Annex 6 of R41-04, GRB issued an interpretation recorded in the report of its 56th session. The proposal formalizes the interpretation as an explicit provision of the regulation.

Proposal to clarify the wording of the 03 series of amendments to UN R51 as adopted by the World Forum in June 2015 (document WP.29/2015/62). The adopted wording could lead to the interpretation that sound levels measured on the left side of the vehicle are to be averaged with levels measured on the right side of the vehicle. The proposed new wording clarifies that the overall sound emission is assessed individually per vehicle side.

Proposal as prepared by the UN R55 informal group and approved by the GRRF to update UN R55 with respect to:
a) Requirements on remote indication;
b) Availability of information on coupling fixing points for A50X couplings;
c) On lateral strength of drawbars; and
d) a new class definition for fully automatic drawbar couplings.

Proposal to insert a new Introduction section to the regulation in order to highlight technical issues related to the installation of LDWS on some specific vehicles included in the scope of the regulation.

Proposal to amend the Introduction of the regulation to highlight technical issues related to the installation of AEBS on some specific vehicles included in the scope of the regulation.

Proposal to correct an oversight by aligning the “alternative procedures” provisions of the regulation with the previously adopted amendment of the regulation that raised the rear-impact speed to between 48 and 52 km/h (03 series of amendments).

Proposal to clarify that fully integrated surveillance mirrors may be mounted below 2 metres in cases where they are integrated in a housing including one or more Class II or III mirrors.

Proposal to

• extend requirements for exterior rear-view mirrors to camera monitor systems;
• reduce the speed threshold for deactivation of emergency controls from 5 km/h to 3 km/h;
• clarify the requirements concerning the height of steps in vehicles which comply with Annex 8;
• limit the mandatory application of the requirements for dedicated areas for prams and pushchairs to Class I vehicles;
• require activation of the alarm and fire suppression systems as soon as the heater is in function regardless of whether the engine is operating;
• extend requirements for exposed seats adjacent to step wells to apply to other exposed seats where there is a risk of the occupant being thrown forward; and
• correct the text of the Regulation.

Proposal to

1. extend requirements for exterior rear-view mirrors to camera monitor systems;
2. reduce the speed threshold for deactivation of emergency controls from 5 km/h to 3 km/h;
3. clarify the requirements concerning the height of steps in vehicles which comply with Annex 8;
4. limit the mandatory application of the requirements for dedicated areas for prams and pushchairs to Class I vehicles;
5. require activation of the alarm and fire suppression systems as soon as the heater is in function regardless of whether the engine is operating;
6. extend requirements for exposed seats adjacent to step wells to apply to other exposed seats where there is a risk of the occupant being thrown forward; and
7. correct the text of the Regulation.

Proposal to mandate fire suppression systems on Class I and II buses.

Proposal to remove the provisions for welded constructions of compressed natural gas (CNG) cylinders or metal liners, including high-strength steel CNG cylinders and consolidating the earlier proposal (from document WP.29/2015/90 that was adopted but set aside at the November 2015 WP.29 session pending the proposal on cylinder construction) to regulate the discharge direction of pressure relief devices on CNG containers.

This proposal clarifies that the provisions concern any cable used in the entire vehicle, not only to those in the interior compartment, engine compartment and separate heater compartment. The proposal also clarifies that the regulation applies not only to electric cables, but also to cable sleeves or cable conduits and it updates the reference to paragraph 5.22. of ISO 6722-1:2011. Specifically, the proposal would apply testing to electric cables, cable sleeves, and cable conduits that exceed a length of 100 mm.

Proposal to modify UN R125 in line with the amendment to UN R46 (indirect vision) that introduces the use of camera-monitor systems (CMS) in place of rear-view mirrors. This proposal also ends the temporary exemption permitting CMS device obstruction of driver field of view from 1 September 2021.

Proposal to align the provisions of Regulation No. 10 with the proposed amendments to Regulation No. 46 (Devices for indirect vision) to allow the replacement of rear-view mirrors by camera-monitor systems.

Proposal to align the provisions of Regulation No. 10 with the amendments to Regulation No. 46 (Devices for indirect vision) to allow the replacement of rear-view mirrors by camera-monitor systems.