Proposal to amend para. 3.5.1. of Annex 4 to require the manufacturer to demonstrate to the approval authority that effective processes, methodologies and tools are in place, up to date and being followed within the organization to manage the safety and continued compliance throughout the product lifecycle, and to demonstrate to the approval authority at least every three years that the safety management system continues to comply with these requirements.

Proposal to delete paragraph 1.2.6. excluding e-axle trailers with e-axles providing electric propulsion and/or incorporating an electric regenerative braking system from the scope of UN R13, and add definitions of “e-axle,” “e-axle trailer,” “dynamo function,” and “e-trailer”; add special requirements for power-driven vehicles supporting e-trailer operation, e-axle trailers equipped with dynamo function, and e-trailers of category O; add requirements for electric control lines conforming to ISO 11992-2:²⁰²⁷; specify message support and functional compatibility; and add provisions for electric regenerative braking, dynamo function, and propulsion, including parameters such as retarder torque demand priority, propulsion force limits, overriding mode activation at speeds below 15km/h, and vehicle stability function interaction.

Proposal to delete the draft “Reserved” paragraph 5.3.7.2.4.3. in GRVA/2026/18. Reserving paragraph 5.3.7.2.4.3. in the 01 series would mean that the subsequent paragraphs would be out of line with the numbering in the 02 series, making future amendments to UN R171 unnecessarily challenging.

Proposal to amend the original version (GRVA/2026/15), insert para. 5.3.7.2.1.13. to require the manufacturer to describe in the safety concept the system behaviour in case the driver is detected to be disengaged during a manoeuvre; amend the original version and the 01 series (GRVA/2026/15 and GRVA/2026/17), amend para. 3.5.1. of Annex 3 to require the manufacturer to demonstrate to the Type Approval Authority at least every three years that the safety management system continues to comply with requirements; amend the 01 and 02 series (GRVA/2026/17 and WP.29/2026/86), amend para. 2.3.2. of Appendix 2 of Annex 3; amend the 02 series (WP.29/2026/86), amend para. 4.2.5.2.19.2.1. of Annex 4; and amend the original version, 01 series and 02 series (GRVA/2026/15, GRVA/2026/17 and WP.29/2026/86), amend para. 4.2.5.2.14.1.2. of Annex 4 and para. 4.2.5.2.14.2.1. of Annex 4.

The document requests guidance on the legal basis for provisions within UN Regulations extending beyond the End-of-Production date and which authority such provisions address. Examples include UN R171 requirements for manufacturers to demonstrate safety management systems to the Type Approval Authority every three years and report annually on Driven Coded Auxiliary System operation until production is discontinued, and UN R155 requirements for Cyber Security Management Systems to apply to the post-production phase when vehicles remain operational but are no longer produced. The document poses an additional question regarding vehicle safety when manufacturers cease operations and cannot fulfill post-deployment safety provisions.

The AEBS IWG held its initial meeting virtually on 22 April with about 50 attendees. Co-Chairs are Germany and Japan; Co-Secretaries are CLEPA and SAE. The IWG is requesting minor changes to its Terms of Reference. A schedule of meetings is planned from September 2026 through September 2028, including informal meetings for input from contracting parties and industry, discussion of requirements for speed reduction in nominal conditions, and investigation of false positives, with a draft regulation document planned for January 2028 and formal submission planned for September 2028.

Proposal to revise the terms of reference and rules of procedures for the Informal Working Group on Advanced Emergency Braking Systems. The IWG shall review current regulatory actions and data on Automated Emergency Braking Systems and provide recommendations on future regulatory actions including revisions to UN Regulation No. 152. The IWG shall examine current AEBS regulations worldwide, assess accident situations for passenger vehicles, draft state-of-the-art performance requirements for collision scenarios involving pedestrians at night, investigate regulatory improvements to performance requirements, and investigate feasibility to include updated requirements to avoid false activation of AEBS for light vehicles. The IWG shall deliver complete regulatory text for AEBS for passenger vehicle requirements as revision of UN Regulation No. 152 for the September 2028 session of GRVA at the latest.

Proposal to amend GRVA/2026/14 and GRVA/2026/18: insert new paragraph 2.28.1. defining “Highway-like road” as a non-highway section with at least two lanes, designated speed limit of at least 80 km/h, no prohibition of pedestrians and cyclists, physical separation dividing opposite traffic, and no at-grade marked pedestrian crossings, rail crossings, or road intersections; amend paragraphs 5.3.7.2.3.1. and 5.5.4.2.6.5. to address highway-like road operation and withholding of HORs; insert new paragraph 4.2.5.2.16. to Annex 4. specifying testing for longitudinally moving bicycle targets; amend Annex 1. to add items 6.4. and 6.4.1. regarding withholding of HORs; and insert new paragraph 16.2.3. establishing that as from 1 September 2029 Contracting Parties shall not be obliged to accept type approvals issued to the preceding series of amendments for systems capable of withholding HORs on highway-like roads.

For the purposes of type approval under any UN Regulation requiring the verification of the timing of a system intervention, manufacturers shall provide to the approval authority or its designated technical service information on the method by which the initiation of any system intervention can be objectively identified and retrieved, including specific flags, status bits, event codes on in-vehicle networks, or visual indications on screens; clear instructions and all necessary tools for the Technical Service to extract, access and interpret the signal identifying the initiation; documented procedures including corresponding data sources, resolution, and timing accuracy appended to the type approval test report; and, where a visual indication displayed on a screen is used, documented latency between the earliest internal point at which the system initiates the function and the moment the visual indication becomes visible on the screen, expressed as a fixed value with associated uncertainty, with the documented latency value used to correct the observed timing of the screen indication appended to the type approval test report.

Proposal to amend para. 5.3.3.2. to clarify that steering shall remain possible with performance laid down in para. 6. for the intact steering system in case of control transmission failure, amend para. 6.1.1. to specify that tests shall be conducted on a level surface affording good adhesion at ambient temperature between 0°C and 45°C, with provisions for deviating conditions at manufacturer request with Technical Service agreement, and insert new para. 6.2.5.1.1. to permit vehicle manufacturers to request at least 10 “figure of eight” manoeuvres with 40 m diameter loops at 10 km/h speed prior to measurement of steering efforts with steering equipment failure.

Proposal to amend para. 5.3. to require that the effectiveness of ELKS shall not be adversely affected by magnetic or electrical fields, demonstrated by fulfilling the technical requirements and respecting the transitional provisions of the 06 series of amendments to UN Regulation No. 10.

Amends para. 5.3. to insert requirements that ELKS effectiveness shall not be adversely affected by magnetic or electrical fields, demonstrated through UN Regulation No. 10 (06 or later) series; para. 6.2.2.1. to require vehicle operating instructions include situations where ELKS is automatically deactivated; para. 6.5.2., 7.2.1., and 8.2.1. to reference UN Regulation No. 130 in its 01 series of amendments; para. 7.2.2.3. to insert “(the latest occurring warning)”; para. 8.3.3.1. to reference para. 6.6.2.1.; and inserts para. 14. establishing transitional provisions applicable from entry into force until 1 September 2030.

Proposal to amend GRVA/2026/16, based on GRVA-25-46. Insert new Introduction paragraph 17 regarding DCAS technology development and continuous review; amend paragraph 2.11. to define Target Lane; amend paragraph 5.3.5.1. to specify system boundary detection and feature transition requirements; amend paragraph 5.3.7.1.4. regarding steering support at boundary conditions; amend paragraph 5.3.7.2.1.1. to clarify driver disengagement detection timing; insert new paragraph 5.3.7.2.1.13. regarding manufacturer description of system behaviour during driver disengagement; amend paragraph 5.3.7.2.3.1. regarding driver confirmation time; amend paragraph 5.3.7.3.1. concerning risk mitigation function compliance; amend paragraph 5.3.7.5.1.1.2. regarding headway configuration notification; insert footnote 3 defining initiation of powertrain; amend paragraph 5.5.3.1. to clarify system off mode default status; amend paragraph 5.5.4.1.1. removing reference to system-initiated manoeuvres; amend paragraph 5.5.4.2.2.3. regarding warning escalation strategy; amend paragraphs 5.5.4.2.5.2. and 5.5.4.2.5.2.1. regarding visual disengagement assessment; amend paragraphs 5.5.4.2.7. and 5.5.4.2.7.1. regarding disengagement detection strategies; amend paragraph 5.5.4.2.8.1. regarding system activation disabling; amend paragraph 6.2.4.1. regarding approaching vehicle deceleration at speeds up to 60 km/h; amend paragraph 14.2. regarding production discontinuation; delete Annex 3 paragraphs 2.15. and 2.16. defining Highway and Non-Highway roads; amend Annex 3 paragraph 3.1.1. regarding documentation package retention; renumber Annex 3 paragraph 3.5.7. to 3.4.5. and insert new paragraph 3.4.5. regarding system information strategy; insert new paragraph 3.5.5. regarding safety management processes during operation phase; renumber former paragraphs 3.5.5. and 3.5.6. to 3.5.6. and 3.5.7. respectively; insert Annex 3 Appendix 2 with new definitions section; amend Annex 4 Introduction regarding test requirements and extended tests; amend paragraph 4.2.2.1. regarding longitudinal control distance; insert new paragraph 4.2.2.2. regarding non-repeatable outcomes; amend paragraphs 4.2.5.2.8.1.2., 4.2.5.2.10.1.1., and 4.2.5.2.12.1.1. regarding bicycle target specifications; delete paragraph 4.2.5.2.14.1.2.; amend paragraph 4.2.5.2.14.2.1. regarding test execution requirements; and amend Annex 5 paragraphs 3.4.8.2. and 3.5.5.1. regarding M&S data and simulation tool criticality assessment.

Proposal to:

• Amend Introduction para. 17 to clarify DCAS development based on current technology and data
• Amend para. 2.11 to delete “the” before “travel”
• Insert new para. 2.28.1. defining “Highway-like road” with characteristics including at least two lanes, designated speed limit of at least 80 km/h, physical separation dividing opposite traffic, and absence of at-grade pedestrian crossings, rail crossings, or road intersections
• Amend para. 5.3.5.1 to specify system shall leave active mode with exception of driver unavailability response
• Amend para. 5.3.7.1.4 to delete “the” before “front tyre”
• Amend para. 5.3.7.2.1.1 to change “detected” to “deemed” and specify disengagement duration of more than 2s
• Insert new para. 5.3.7.2.1.13 requiring manufacturer to describe system behaviour if driver detected disengaged during manoeuvre
• Amend para. 5.3.7.2.3.1 to delete requirements reference and require sufficient time for driver confirmation
• Amend para. 5.3.7.2.5.3.1 to add “or highway-like road” to highway operation requirements
• Delete para. 5.3.7.2.4.3 and renumber paras. 5.3.7.2.4.4 to 5.3.7.2.4.11 as 5.3.7.2.4.3 to 5.3.7.2.4.10
• Amend para. 5.3.7.3.1 to reference systems driver unavailability response and RMF requirements of 04 series UN R79
• Amend para. 5.3.7.3.3 to specify system capable of lane changes during driver unavailability response in compliance with RMF requirements
• Amend para. 5.5.4.2.2.3 to renumber and require warning strategies prioritize simultaneously activated emergency assistance systems
• Amend paras. 5.5.4.2.5.2 and 5.5.4.2.5.2.1 to specify visual disengagement criteria, dashboard consideration limited to 3 seconds, and visual re-engagement duration of at least 200 milliseconds
• Amend para. 5.5.4.2.6.5 to allow HOR withholding on highway-like roads at speeds up to 130 km/h and require verification of road characteristics for at least 500 m or 30 seconds, demonstration of safe cyclist operation, and HOR at least 7s before end of highway-like road
• Amend paras. 5.5.4.2.7 and 5.5.4.2.7.1 to add assessment of gaze direction changes and insert new para. 5.5.4.2.7.1
• Amend para. 6.2.4.1 to permit deviation from assessment at speeds up to 60 km/h with manufacturer explanation to Type Approval Authority
• Amend para. 14.2 to change “definitely” to “definitively”
• Amend Annex 1 to add para. 6.4.1 for system capability of withholding HORs on highway-like roads
• Delete Annex 3 paras. 2.15 and 2.16 defining “Highway” and “Non-Highway”
• Amend Annex 3 para. 3.1.1 to change “definitely” to “definitively”
• Renumber Annex 3 para. 3.5.7 to 3.4.5 and amend to require system information strategy

Proposal to modify the specified maximum remote controlled parking operating range from 6 m to 15 m. Large markets including Canada, USA, and China do not regulate maximum remote controlled parking operating range. Remote controlled parking systems exceeding 6 m operating range are already offered in the field. Radio wave-based ranging is inherently inaccurate due to complicated and varying electromagnetic environment in garage and changing orientation of remote device, requiring safety margin integration into product design, which reduces effective usable range below 6 m maximum. Extended range remote controlled parking systems have been used in the field for several years without negative feedback or identified safety threats.

This document lists the decisions taken during the GRVA session in Montreal. These decisions will be formally considered and likely adopted during a session on 23 June in Geneva.

Proposal to amend row 13© of the List of proposed decisions on the documents reviewed during the informal consultations (GRVA-25-04/Rev.2) to specify that GRVA partly included the work on DSSAD within the IWG on ADS remit, with items to be included comprising strategic directions and data elements structured as a separate workstream under an OPI’s coordination, and DSSAD activities related to data format, accessibility, survivability and location becoming part of IWG on EDR activities, with regular online meetings organized to ensure alignment and coordination between the two groups.

Proposal to establish a Guidance and Interpretation document supporting implementation of the proposed UN Global Technical Regulation and UN Regulation on Automated Driving Systems. The document, based on informal document GRVA-25-20 reviewed at GRVA’s twenty-fifth session, provides draft guidance as of the seventeenth GRVA Workshop on ADS (27 April–1 May 2026), with restructuring and refinement expected for submission to GRVA at its twenty-sixth session (14–18 September 2026), to facilitate interpretation of ADS requirements, provide evidence guidance, and harmonize application across manufacturers, authorities, and inspection bodies.

Proposal based on informal document GRVA-25-43 to amend Annex 4, para. 3.5.1. to require the manufacturer to demonstrate to the Type Approval Authority at least every three years that the safety management system continues to comply with requirements for software and hardware employed in the system. This amendment applies the same principle regarding Safety Management System compliance as specified in UN Regulation No. 171 on Driver Control Assistance Systems.

Proposal to amend para. 2.14. to insert a footnote clarifying that the road surface friction coefficient of 1 for sufficient nominal Peak Braking Coefficient (PBC) is understood to be a minimum value. This document is based on working document GRVA/2026/21 as amended by informal document GRVA-25-36.

Proposal to amend UN R155 by inserting new para. 5.1.3.(e) establishing that the Certificate of Compliance for the Cyber Security Management System shall not be issued by a different Approval Authority than the one granting type approval, and amend UN R156 by inserting new para. 5.4. establishing that Approval Authorities shall not grant type approval if the Certificate of Compliance for the Software Update Management System has not been issued by the same Approval Authority granting type approval. Justification includes ensuring holistic cybersecurity assessment, clarifying reporting obligations under para. 7.2.2.2.(g), addressing unharmonized mutual recognition of management system certificates, maintaining consistency between regulations, and upholding the fundamental principle that approval authorities retain responsibility for all aspects of type approval.

Proposal to insert a new sub-paragraph 5.6.1.1.4.1 to establish exemptions for Automatically Commanded Steering Function Category A functions designed for off-road low-speed vehicle recovery manoeuvres, and amend para. 5.6.1.2.7 to increase the specified maximum Remote-Control Parking operating range from 6 m to 15 m.

Proposal to amend para. 5.3.2. to require notification of assessment methods and criteria including paras. 8.2. and 8.3., insert new paras. 8.2. and 8.3. establishing criteria for equipment installation without further assessment, and amend Annex 1 to require disclosure of equipment excluded from assessment pursuant to paras. 8.2. and 8.3. The amendments clarify that equipment with negligible intrinsic cyber security risk installed according to manufacturer specifications and not introducing cyber security risk, and standard non-automotive equipment connected solely for power supply with no increased cyber security risk, shall not invalidate approval of the original vehicle type under UN Regulation No. 155.