Australian proposal to adapt UN R14 to current Australian child restraint system anchorage requirements within the context of enabling the use of UN R14 within the international whole vehicle type approval system.

Proposal to transfer all ISOFIX requirements from UN R14 into a new UN Regulation. Within the context of the international whole vehicle type approval program, the removal of these CRS anchorage provisions would align UN R14 with its Australian Design Rule counterpart and enable Australia to apply the revised UN R14 narrowed down to adult seat-belt anchorages only.

Proposal to clarify that only a three-point safety belt is permitted in the driver position.

Proposal to clarify the text of UN R14. The current text has produced differing interpretations among Technical Services with regard to which requirements apply to central seating positions in rear rows of category M₁ and N₁ vehicles and the minimum distance between two effective lower belt anchorages (L1 and L2). The proposed amendment clarifies that rear seat rows can only have one central seating position with a reduced minimum distance of 240 mm. Rear seat rows with an even number of seats shall always have a distance of at least 350 mm.

Proposal to consolidate provisions concerning ISOFIX top tether anchorages and i-Size seating positions removed from Regulation No. 14 in a new regulation. This change removes obstacles to the inclusion of UN R14 into Annex 4 of the future UN Regulation No. 0 of the International Whole Vehicle Type Approval (IWVTA). This document revises the working document GRSP/2017/7.

Australian proposal to adapt UN R14 to current Australian child restraint system anchorage requirements within the context of enabling the use of UN R14 within the international whole vehicle type approval system.

Proposal to transfer all ISOFIX requirements from UN R14 into a new UN Regulation. Within the context of the international whole vehicle type approval program, the removal of these CRS anchorage provisions would align UN R14 with its Australian Design Rule counterpart and enable Australia to apply the revised UN R14 narrowed down to adult seat-belt anchorages only.

Proposal to clarify that only a three-point safety belt is permitted in the driver position.

Proposal to clarify the text of UN R14. The current text has produced differing interpretations among Technical Services with regard to which requirements apply to central seating positions in rear rows of category M₁ and N₁ vehicles and the minimum distance between two effective lower belt anchorages (L1 and L2). The proposed amendment clarifies that rear seat rows can only have one central seating position with a reduced minimum distance of 240 mm. Rear seat rows with an even number of seats shall always have a distance of at least 350 mm.

Proposal to consolidate provisions concerning ISOFIX top tether anchorages and i-Size seating positions removed from Regulation No. 14 in a new regulation. This change removes obstacles to the inclusion of UN R14 into Annex 4 of the future UN Regulation No. 0 of the International Whole Vehicle Type Approval (IWVTA). This document revises the working document GRSP/2017/7.

Australian proposal to adapt UN R14 to current Australian child restraint system anchorage requirements within the context of enabling the use of UN R14 within the international whole vehicle type approval system.

Proposal to transfer all ISOFIX requirements from UN R14 into a new UN Regulation. Within the context of the international whole vehicle type approval program, the removal of these CRS anchorage provisions would align UN R14 with its Australian Design Rule counterpart and enable Australia to apply the revised UN R14 narrowed down to adult seat-belt anchorages only.

Proposal to clarify that only a three-point safety belt is permitted in the driver position.

Proposal to clarify the text of UN R14. The current text has produced differing interpretations among Technical Services with regard to which requirements apply to central seating positions in rear rows of category M₁ and N₁ vehicles and the minimum distance between two effective lower belt anchorages (L1 and L2). The proposed amendment clarifies that rear seat rows can only have one central seating position with a reduced minimum distance of 240 mm. Rear seat rows with an even number of seats shall always have a distance of at least 350 mm.

Proposal to consolidate provisions concerning ISOFIX top tether anchorages and i-Size seating positions removed from Regulation No. 14 in a new regulation. This change removes obstacles to the inclusion of UN R14 into Annex 4 of the future UN Regulation No. 0 of the International Whole Vehicle Type Approval (IWVTA). This document revises the working document GRSP/2017/7.

Australian proposal to adapt UN R14 to current Australian child restraint system anchorage requirements within the context of enabling the use of UN R14 within the international whole vehicle type approval system.

Proposal to transfer all ISOFIX requirements from UN R14 into a new UN Regulation. Within the context of the international whole vehicle type approval program, the removal of these CRS anchorage provisions would align UN R14 with its Australian Design Rule counterpart and enable Australia to apply the revised UN R14 narrowed down to adult seat-belt anchorages only.

Proposal to clarify that only a three-point safety belt is permitted in the driver position.

Proposal to clarify the text of UN R14. The current text has produced differing interpretations among Technical Services with regard to which requirements apply to central seating positions in rear rows of category M₁ and N₁ vehicles and the minimum distance between two effective lower belt anchorages (L1 and L2). The proposed amendment clarifies that rear seat rows can only have one central seating position with a reduced minimum distance of 240 mm. Rear seat rows with an even number of seats shall always have a distance of at least 350 mm.

Proposal to consolidate provisions concerning ISOFIX top tether anchorages and i-Size seating positions removed from Regulation No. 14 in a new regulation. This change removes obstacles to the inclusion of UN R14 into Annex 4 of the future UN Regulation No. 0 of the International Whole Vehicle Type Approval (IWVTA). This document revises the working document GRSP/2017/7.

Australian proposal to adapt UN R14 to current Australian child restraint system anchorage requirements within the context of enabling the use of UN R14 within the international whole vehicle type approval system.

Proposal to transfer all ISOFIX requirements from UN R14 into a new UN Regulation. Within the context of the international whole vehicle type approval program, the removal of these CRS anchorage provisions would align UN R14 with its Australian Design Rule counterpart and enable Australia to apply the revised UN R14 narrowed down to adult seat-belt anchorages only.

Proposal to clarify that only a three-point safety belt is permitted in the driver position.

Proposal to clarify the text of UN R14. The current text has produced differing interpretations among Technical Services with regard to which requirements apply to central seating positions in rear rows of category M₁ and N₁ vehicles and the minimum distance between two effective lower belt anchorages (L1 and L2). The proposed amendment clarifies that rear seat rows can only have one central seating position with a reduced minimum distance of 240 mm. Rear seat rows with an even number of seats shall always have a distance of at least 350 mm.

Proposal to consolidate provisions concerning ISOFIX top tether anchorages and i-Size seating positions removed from Regulation No. 14 in a new regulation. This change removes obstacles to the inclusion of UN R14 into Annex 4 of the future UN Regulation No. 0 of the International Whole Vehicle Type Approval (IWVTA). This document revises the working document GRSP/2017/7.