Proposal to expand the scope of the regulation on unauthorized L-category vehicle use to include electronic devices such as keyless entry systems, similarly to what already exists in UN R116 on passenger car use.

Proposal to introduce requirements for CNG compressor and CNG accumulator components designed to maintain stable pressure in fuel systems. See also documents GRSG-113-24 and 25 from the previous GRSG session.

Revised proposal from OICA pursuant to comments received during the previous GRRF session to

1. exempt cases where the driver has temporarily deactivated the speed limiter from the warning requirement for excess speed in in order to reduce driver distraction
2. introduce throttle control via adjustment of the accelerator pedal position
3. to correct an editorial error in paras. 5.2.5.4.2. and 21.2.5.4.2.

The European Agreement Concerning the International Carriage of Dangerous Goods by Road (ADR) requires vehicles to be equipped with a speed limitation device compliant with UN R89. UN R89 refers to speed limitation devices (SLD) and speed limitation functions (SLR) (i.e., aims to be technologically neutral). Russia requests GRRF confirmation that compliance with UN R89 can be achieved through either an SLD or SLF.

Annex 1 of UN R55 concerns the type approval communication form. Item 9.3. requires information “For Class A mechanical coupling devices or components, including towing brackets”. Poland proposes to add “if fitted” to the description in order to avoid interpretations that brackets must be part of the approval (i.e., the approval may concern the coupling ball without additional attachments).

Proposal to delete Appendix 5 and thereby end static testing as a compliance option. In addition, this proposal amends Appendix 1 by reducing the forward movement of the head of the manikin to 1.2 m in alignment with UN Regulation No. 14. Further, the proposal would limit the movement of the seat anchorages to 100 mm to ensure a minimum residual space for the passenger between the seats. Lastly, to ensure that seat fixations are reliably fastened after relocation, the proposal would require the necessary information to be marked directly on the seat and provided in the owner’s manual.

Consolidated draft proposal for a blind spot information systems regulation as developed under the VRU Proxi informal group, based on GRSG/2017/11.

Working draft based on the proposal in document GRSG/2017/11 with marked revisions and comments.

New proposal on blind spot information systems testing without vehicle turning for discussion.

Proposal to align Annex 11 with Annex 3 following the removal of paragraphs in the latter regarding the marking of a vehicle with respect to the mass of baggage (done via Corrigendum 1 to Revision 6). This proposal would delete the same requirements (paragraphs 3.3.1.2.1, 3.3.1.2.2., 3.3.1.2.2.1. and 3.3.1.2.2.2) from Annex 11.

Proposal to clarify the text of document GRSG/2018/7 submitted to enable the approval of the laminated-glass panes with improved mechanical properties, especially as designed for front, exterior, forward-facing glazing of the upper deck of a double-deck vehicle. The proposal would amend Annex 7 (laminated-glass panes), inserting a new paragraph 6. to allow optional 2,260 g ball test and headform test for laminated-glass panes.

The target of the meeting was to define essential periodic inspection requirements to be respected when installing gaseous fuel components into a vehicle, and to clarify the material requirements for components inside the LPG tank. The work addressed UN R67 and UN R110. No further meetings are planned at this time.

Italy research on type CNG4 cylinders in support of the proposal to require that covers be removed in cases where ogive protective covers are fitted to a cylinder before conducting the impact damage (drop) test (document GRSG/2017/29).

Report on the task force sessions held to discuss the potential for improvements in the safety of M₂ and M₃ vehicles in the event of fire.

Draft Terms of Reference and Rules of Procedure of the GRSG informal working group on the behaviour of M2 and M3 general construction in case of fire event (BMFE) pursuant to discussions held since the last GRSG session.

Update on Transport Canada VRU collision research.

Final report on a Washington State Transit Insurance Pool (WSTIP) pilot program to assess the Rosco/Mobileye Shield+ system collision avoidance warning system (CAWS) specifically designed for transit buses. This project involved field testing and evaluation of the CAWS in revenue service over a three-month period. The system provides alerts and warnings to the bus driver for the following conditions that could lead to a collision:

1. changing lanes without activating a turn signal (lane departure warning was disabled for this pilot),
2. exceeding posted speed limit,
3. monitoring headway with the vehicle leading the bus,
4. forward vehicle collision warning, and
5. pedestrian or cyclist collision warning in front of, or alongside the bus.