Supplement 11 to the 02 series of amendments deleted a paragraph on how to measure colors when amending the regulation to specify that colors must fall within limits defined by UN R48. This proposal restores and clarify the measurement procedure.

Proposal to clarify the definitions of type with regard to manufacturer, trade names and marks.

Corrections to the proposal for Supplement 12 to the 02 series of amendments to Regulation No. 3.

Proposal to correct and harmonize provisions concerning approval markings.

Proposal from the Working Party “Brussels 1952” (GTB) to amend the geometric visibility provisions.

GTB proposal to amend the geometric visibility provisions. Subsequent to the preparation of the proposed amendments in document GRE/2012/42, several editorial corrections have been identified by GTB experts. This document replaces that original submission.

Document GRE-68-02 from the Working Party “Brussels 1952” (GTB) proposes to amend the geometric visibility provisions of multiple lighting regulations. Since manufacturers have already developed lighting in line with the current definitions, OICA seeks a 48-month transition period.

GRE/2012/42 is a GTB proposal to amend the geometric visibility provisions. This document corrects GRE/2012/42 in line with the latest state of the subject regulations including amendments submitted for consideration at the November WP.29 session.

Submitted by Germany proposing to update the Conformity of Production requirements (CoP).

Proposal to amend the geometric visibility provisions.

This document contains editorial corrections to document GRE/2012/42 to amend the geometric visibility provisions of Regulations No. 3, 6, 7, 48, 77 and 91 following a review with the GRE secretariat to ensure that the proposal aligns with the latest state of the regulations.

Italy proposes to introduce into each Regulation dealing with the type approval of lighting or light signalling devices a direct reference to the requirements contained in Regulations 48, 53 and 74, and 86, mandating the lamp manufacturers to apply them to obtain type approvals.

Proposal to delete the shape requirements for retro-reflecting devices, except for triangles.

Proposal to reference the requirements for installation contained in Regulations Nos. 48, 53, 72 and 86 into the Regulations 3, 4, 6, 7, 19, 23, 38, 50, 77, 87, 91, 98, 104, 112, 113, 119 and 123.

Proposal to update the Conformity of Production provisions.

Editorial correction to the presentation of the collective amendments to selected lighting regulations proposed in document GRE/2013/55.

Proposal to revise the Italian proposal in order to clarify that the requirements pertain only to characteristics verifiable directly on each lamp in order to avoid confusion with characteristics that can only be verified on the vehicle after installation.

Proposal to delete the shape requirements for retro-reflecting devices, except for triangles.

Proposal to reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86 into the Regulations 3, 4, 6, 7, 19, 23, 38, 50, 77, 87, 91, 98, 104, 112, 113, 119 and 123. This proposal is a revised version of document GRE/2013/55 discussed during the October 2013 GRE session.

Proposal to amend UN R3 in order to address the recent introduction of devices with a reduced light distribution to be mounted no higher than 750 mm. 1. The proposal would also require colorimetric and photometric testing to type approve each variation in color of an approved device.

Example of what Regulation No. 3 might look like under the simplification of lighting regulations through the use of a “horizontal reference document” that would consolidate provisions common across lighting regulations.

Proposal as approved by the GRE to address the recent introduction of devices with reduced light distribution that may be mounted no higher than 750 mm. The proposal would also require colorimetric and photometric testing to type approve each variation in color of an approved device.

Working draft aiming to illustrate modifications to the regulation on retro-reflecting materials that could be made under the simplification of lighting regulations through the use of a horizontal reference document containing provisions common across lighting regulations.

Updated paper on the grouping of lighting regulations under one of three new regulations as follows:
Light Signaling Devices incorporating Regulations 4, 6, 7, 23, 38, 50, 77, 87, and 91
Forward Lighting Devices incorporating Regulations 19, 98, 112, [ 113 ], 119, and 123
Retro-Reflective Devices incorporating Regulations 3, 27, 69, 70, and 104

Proposal to transfer the colorimetric coordinates of UN R3 to UN R48 as part of the larger project to consolidate the colorimetric coordinates of active and passive light devices under UN R48.

Proposal to clarify the scope of UN R3 through specific reference of its applicability to vehicles of categories L, M, N, O, and T.

Proposal to introduce provisions for triangular retro-reflectors of Class IIIB.

The amendment to paragraph 2.9.3. of Regulation No. 48 (Supplement 3 to the 02 series of amendments) introduced into the definition of the illuminating surface of a retro-reflector the reference to the declaration of this surface by the applicant during type approval of the device. This proposal amends UN R3 to provide for this procedure.

Proposal to amend the trichromatic coordinates for red light in view of new technologies used in light sources and to promote harmonization by adopting limits specified in SAE J578 and CIE No. 2.2 (TC – 1.6) 1975.

Proposal to allow the fitting of retro-reflecting devices in different positions on different vehicle types.

Compressed data package of three documents providing lists of proposals for amendments to lighting regulations within the context of plans for the restructuring of UN lighting regulations.

As part of the Simplification of Lighting Regulations program, this proposal prepares UN R3 for being “frozen” and superseded by a new comprehensive regulation on retro-reflecting devices. The proposal incorporates by reference specifications, as applicable, of the lighting installation Regulations Nos. 48, 53, 74 or 86 and adds specifications for conformity of production.

Collective amendment working draft to introduce the transitional provisions for the switch from the current lighting regulations to the new simplified lighting regulations (light-signalling, retro-reflective devices, and road illumination devices). The draft proposal would allow 24 months from the entry into effect of the new regulations.

Proposal as sent by the SLR informal group to GRE for its October 2017 session for transitional provisions for the phasing out of the current lighting regulations (in terms of continued development and granting of new type approvals) in favor of the new lighting device and related regulations.

Proposal from the Simplification of Lighting Regulations informal group to introduce transitional provisions for the phasing out of the existing Regulations on lighting and light-signalling in conjunction with the introduction of three new simplified Regulations on Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD).

SLR informal group draft for the proposal of a new regulation consolidating all current regulations regarding retro-reflecting devices. This draft UN Regulation combines the provisions of the current Regulations Nos. 3, 27, 69, 70 and 104.

Proposal from the Simplification of Lighting Regulations informal group to introduce transitional provisions for the phasing out of the existing Regulations on lighting and light-signalling in conjunction with the introduction of three new simplified Regulations on Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD).

Proposal to a) improve the transitional provisions presented in GRE/2018/11 with regard to the collective
amendments to Regulations Nos. 3, 4, 6, 7, 19, 23, 27, 38, 50, 69, 70, 77, 87, 91, 98, 104, 112, 113, 119 and 123 and b) introduce new requirements into the 06 series of amendments to UN R48 with regard to the validity and installation of type approved lighting and light-signalling devices.

Proposal to improve the document GRE/2018/11 (GRE-79-31) and to introduce in R48-06 new minimum installation requirements for type approved lighting and light-signalling devices and to improve the transitional provisions for Regulations Nos. 3, 4, 6, 7, 19, 23, 27, 38, 50, 69, 70, 77, 87, 91, 98, 104, 112, 113, 119 and 123. Proposal for new minimum installation requirements for type approved lighting and light-signalling devices in R48-06. Proposal to clarify which devices may be installed on the vehicles in line with the applicable requirements as amended by the new UN Regulations on light-signalling devices, road illumination devices, and retro-reflecting devices.

Proposal from GRE to introduce transitional provisions for the phasing out of UN R3 in conjunction with the introduction of the new simplified Regulation on Retro-Reflective Devices (RRD).

SLR informal group removing the brackets around (i.e., confirming) the 24-month transition period for the switch to approvals only under the new LSD, RRD, and RID regulations and to delete the proposal that approvals and extensions of approvals granted under each regulation would remain valid indefinitely.

Request to GRE and the SLR informal group to give consideration to transitional provisions.

Proposed transitional provisions to end further development of current UN lighting regulations in favor of the new UN Regulations on light-signalling devices (LSD), road illumination devices (RID), and retro-reflecting devices (RRD) developed under the Simplification of Lighting Regulations (SLR) program.

Proposal to introduce transitional provisions for the phasing out of the existing Regulations on lighting and light-signalling in conjunction with the introduction of three new simplified Regulations on Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD).

Proposal to prohibit the use of light source modules with ECE cap–holder systems.

Proposal to complete the requirements regarding the use of cap–holder systems in the case of light source modules in a lamp.

This proposal mainly corrects an unintended, but potentially costly, obligatory (rather than optional) use of mingled letters in the marking provisions of UN R23. The proposal also corrects the marking provisions of UN R4 and R23 by deleting an unnecessary hyphen.

The Forum adopted a new UN Regulation on LED light sources at its March 2012 session. This document updates the collective amendment that introduces LED light sources into the relevant UN Regulations 4, 6, 7, 23, 38, 50, 77, 87, 91 and 119.

Proposal as adopted by the Working Party on Lighting and Light-Signalling (GRE) at its sixty-seventh session to introduce provisions for replaceable light-emitting diode (LED) light sources and to correct and harmonize the provisions concerning approval markings.

Proposal from Germany to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources.

Proposed modifications to the German proposal (GRE/2012/20) to ensure that non-replaceable and unapproved filament light sources used in sealed devices and in (filament) light-source modules have a sufficient lifetime and fulfill color endurance verification.

Japanese perspectives on selected regulations (NU R4, 34, 46, and 79) within the context of adoption of the International Whole Vehicle Type Approval system/regulation.

Submitted by Germany proposing to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources. This proposal supersedes document GRE/2012/20 and informal document GRE-68-03.

Submitted by Germany proposing to update the Conformity of Production requirements (CoP).

UN R4 specifies requirements regarding registration plates that are used primarily in Europe. Japan proposes to include additional provisions in order to extend the applicability of the regulation to registration plates of different sizes used in non-European countries. Japan also proposes creating Class A and Class B lamp categories towards this end.

UN R4 specifies requirements regarding registration plates that are used primarily in Europe. Japan proposes to include additional provisions in order to extend the applicability of the regulation to registration plates of different sizes used in non-European countries. This presentation supplements the proposal.

Proposal to clarify the definition of “type” with regard to manufacturer, trade names and marks.

GRE proposal to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources and to update the Conformity of Production requirements (CoP).

Recommended corrections to the proposal to clarify the definition of “type” with regard to manufacturer, trade names and marks as used in Regulations Nos. 4, 6, 7, 19, 23, 38, 45, 50, 77, 87, 91,98 ,104, 112, 113, 119 and 123.

The European Commission, pursuant to concerns raised in its Technical Committee Motor Vehicles, raises issues with two paragraphs that are reproduced in a number of GRE proposals set for consideration at the November WP.29. The EU, therefore, cannot vote to adopt the proposals until these concerns have been addressed (i.e., for the March 2014 session).

Proposal to add registration plates used in non-European Contracting Parties to the scope of the regulation. This document is based on the previous document GRE-69-23.

As part of the work on establishing an International Whole Vehicle Type Approval (IWVTA) system, Japan has noted differences between European and Japanese vehicle registration (license) plates. Since UN R4 would be part of the IWVTA process, Japan seeks to add its plate requirements to the European requirements embodied in UN R4 in order to enable Japan to adopt this regulation and thereby adhere to the IWVTA.

UK proposal to address concerns raised in the series of proposals to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources.

Revisions to the GRE proposal (document WP.29/2013/69) to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources and to update the Conformity of Production requirements (CoP). This proposal also applies to documents:
WP.29/2013/71,
WP.29/2013/72,
WP.29/2013/76,
WP.29/2013/79,
WP.29/2013/83,
WP.29/2013/87,
WP.29/2013/88,
WP.29/2013/89 and
WP.29/2013/94.

In a letter to Mssrs. Gauvin and Ramos, the European Commission, pursuant to concerns raised in its Technical Committee Motor Vehicles, raises issues with two paragraphs that are reproduced in a number of GRE proposals set for consideration at the November WP.29. The EU, therefore, cannot vote to adopt the proposals until these concerns have been addressed (i.e., for the March 2014 session).

Text prepared by the International Automotive Lighting and Light Signalling Expert Group (GTB) to clarify the definition of “type”, with regard to manufacturer, trade names and marks and to introduce editorial improvements to the requirements for markings.

Although documents GRE/2013/45 and GRE-70-02 were adopted by GRE at its last (70th) session, this proposal consolidates the amendments and offers editorial improvements to the provisions concerning markings in Regulations Nos. 19, 23, 38, 65 and 119. These editorial improvements aim to clarify that the devices, and not only the samples, shall bear the trade name or mark and align the requirements with the other correctly worded regulations to avoid misunderstanding.

Text prepared by Japan and Finland to introduce provisions for registration plates that differ in size from the standard EU plates.

Proposal to introduce provisions for registration plates that differ in size from the standard EU plates. Please note that the designation as Supplement 18 is an error. This proposal will be adopted as Supplement 17.

Proposal for a revision of UN R4 under the proposed simplification of lighting regulations.

Proposal to insert provisions to cover cases where several non-identical light source modules are used in a lamp.

Proposal to clarify the scope of the regulation specifically to vehicles of categories M, N, O, and T.

Proposal to insert references to Regulations Nos. 37 and 99 and to the International Electrotechnical Commission (IEC) Publication 60061, specifying the use of filament lamps and gas-discharge light sources.

Lamps equipped with non-replaceable light sources, e.g. LED’s, can be operated at a range of voltages. This proposal enables the proper testing and approval of such devices under a single approval number provided that the range of voltage and the rated (maximum) wattage is included in the marking of the lamp.

Proposal to allow the use of changeable “light source modules” instead of non-replaceable light sources (pursuant to the amendments previously agreed for UN R7).

Proposal to correct the definition for different types of rear registration plate lamps. This proposal deletes the criteria " the angle of incidence of the light on the surface of the plate" in paragraph 1.3 because this item contradicts the provisions of paragraphs 2 and 7 which state "…. the manufacturer of the illuminating device shall specify one or more or a field of positions in which the device is to be fitted in relation to the space for the registration plate …. ".

Proposal to introduce provisions for the approval of "slightly curved registration plates”.

This proposal removes the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s). From an electronic point of view, the information of the wattage brings no benefit and is confusing if the same module is used in different systems and at different wattages.

Advances in LED lighting raise the prospects for incorporation of lighting into rear registration plates. In 2004, in response to a proposal for the regulation of such plates under UN R48, GRE determined that illuminated plates were not lamps and therefore were outside the scope of UN R48. The Spanish delegation would like to submit this issue again for the consideration of GRE members in order to have a coordinated and common view on this subject.

Proposal to

1. insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources,
2. update the Conformity of Production requirements (CoP),
3. reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86 for application as warranted
4. clarify the definition of “type”, with regard to manufacturer, trade names and marks,
5. introduce editorial improvements to the requirements for markings,
6. remove the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s).

Proposals for amendments to Regulations Nos. 4, 6, 7, 19, 23, 38, 48, 50, 77, 87, 91, 98, 112, 113, 119, 123 to clarify requirements for light sources in lighting and light-signalling Regulations listed in Annex 4 to UN Regulation No. 0. The proposed UN R0 on whole vehicle type approval requires submission of approval certificates for components and systems. Vehicle manufacturers work directly with UN R48 approvals, but lamp and device approvals are generally handled by lighting suppliers. UN R48 includes provisions for listing approvals of lighting units, but not for approvals of light sources (presently UN R37, R99, and R128). This set of proposed amendments introduces provisions for light-source approvals under the device regulations.

Proposal to clarify the requirements for light sources in the lighting and light-signalling Regulations listed in Annex 4 to Regulation No. 0 on the International Whole Vehicle Type Approval (IWVTA).

Revised proposal to clarify the requirements for light sources in the lighting and light-signalling Regulations listed in Annex 4 to Regulation No. 0 on the International Whole Vehicle Type Approval (IWVTA) pursuant to GRE-77 discussions.

Proposal to clarify the requirements for light sources in the lighting and light-signalling Regulations listed in Annex 4 to Regulation No. 0 on the International Whole Vehicle Type Approval (IWVTA). The reference to “Illumination of rear registration plate lamps” should read ""Illumination of rear registration plates".

Proposal from the Simplification of Lighting Regulations informal group to combine provisions of UN Regulations Nos. 4, 6, 7, 23, 38, 50, 77, 87 and 91 into a single regulation. This consolidation aims to streamline the administration and implementation of these lighting regulations while setting the foundation for a future shift towards performance-based approval requirements. This proposal restructures the existing body of lighting regulations without changing their content (e.g., technical requirements).

Proposal from GRE to introduce transitional provisions for the phasing out of UN R4 in conjunction with the introduction of the new UN Regulation on Light-Signalling Devices (LSD).

Proposal from GRE to introduce transitional provisions for the phasing out of UN R4 in conjunction with the introduction of the new UN Regulation on Light-Signalling Devices (LSD).

Proposal to add a reference to the installation parameters of the licence plate illumination lamps determined during their type approval process. Every type-approved device or pair of devices have their own geometrical position in relation to the rear registration plate which is determined based on the illumination levels, maximum gradient value, angles of visibility and light incidence angle. This proposal would introduce a reference to these parameters in UN R48.

Text prepared by the International Automotive Lighting and Light Signalling Expert Group (GTB) to amend the transitional provisions to cease granting new type approvals for the “Sealed Beam” headlamps and to correct the title of UN Regulation No. 31.

GRE proposal to amend the transitional provisions to cease granting new type approvals for the “Sealed Beam” headlamps.

Proposal to complete the requirements regarding the use of cap–holder systems in the case of light source modules in a lamp.

Proposal to delete Annex 5. The deletion of chromaticity requirements in the form of coordinates makes Annex 5 superfluous. This proposal would delete Annex 5 and insert its content into paragraph 8 while renumbering the remaining annexes.

Proposal to delete Annex 5 of Regulation Nos. 6 and 7. The deletion of chromaticity requirements in the form of coordinates makes Annex 5 superfluous. The present proposal would delete Annex 5, inserting its content into paragraph 8 and renumbering the remaining annexes.

Pursuant to the decision to delete the phrase "last column of the table” from paragraph 6.1.6. in Regulation No. 7 following changes to the structure of this table, this proposal would delete the same phrase from paragraph 6.1.2. in Regulation No.6.

Pursuant to the decision to delete the phrase "last column of the table” from paragraph 6.1.6. in Regulation No. 7 following changes to the structure of this table, this proposal would delete the same phrase from paragraph 6.1.2. in Regulation No.6. Originally submitted as Corrigendum 1 to Supplement 19 to the 01 series of amendments to Regulation No. 6, this proposal was adopted by the Forum as Supplement 22.

Corrigendum from the Secretariat to remove a reference to categories 3 and 4 from the English version to UN R6-Revision 5. Categories 4 and 5 were previously removed from UN R6, but this reference was inadvertantly overlooked.

Text adopted by the Working Party on Lighting and Light-Signalling (GRE) to introduce into the Regulation provisions for the use of light-emitting diode (LED) light sources.

Proposal to ensure that the signal requirements to indicate the activation of a failure tell-tale are not constrained to a particular type of light source. The current wording of UN R6 relates only to filament lamps; other light sources should be treated identically to avoid design restriction.

Proposal as adopted by the Working Party on Lighting and Light-Signalling (GRE) at its sixty-seventh session to correct an editorial error in Revision 5 of the Regulation.

Proposal from the Working Party “Brussels 1952” (GTB) to amend the provisions concerning the requirements for geometric visibility of devices for adaptive rear lighting.

Presentation reviewing flasher signals and technological advances in support of developing clearer parameters within UN R6 and R48 to govern variations of light signals.

Review of a study on driver perceptions of direction indicator performance.

Correction by the Forum secretariat of a typographical error in the original proposal for the corrigendum.

Submitted by Germany proposing to update the Conformity of Production requirements (CoP).

Text prepared by Poland and Austria to clarify the possibility of installing on vehicles light-signalling devices which obtained a type approval according to component UN Regulations.

Text prepared by France and Germany to implement direction indicator lamps with a variable apparent surface into UN Regulation No. 6.

Proposal to amend the geometric visibility provisions.

Text prepared by the Netherlands and the United Kingdom in response to the proposal (document GRE/2013/13) from France and Germany to implement direction indicator lamps with a variable apparent surface into UN Regulation No. 6.

Text prepared by OICA to propose amendments to document GRE/2013/13 submitted by France and Germany for Supplement 25 to the 01 series of amendments to Regulation No. 6

Proposed revision to ensure that a minimum horizontal and vertical movement ratios on the apparent surface of direction indicators is maintained in the proposal by France and Germany for lamps with spatial variation of the intensity under UN Regulation No. 48.

Clarifications to the proposal by Germany proposing to update the Conformity of Production requirements (CoP).

Revised proposal from France and Germany to introduce provisions for direction indicator lamps with variable apparent surfaces. This document supersedes document GRE/2013/13.

Proposal to introduce “interdependent lamps” into Regulation No.6, taking into account the function of direction indicators as hazard warning signals.

Proposal to amend UN R48 in order to enable type-approval of direction indicators with variable apparent surfaces.

GRE proposal to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources and to update the Conformity of Production requirements (CoP).

Editorial corrections to the proposal to introduce “interdependent lamps” into Regulation No. 6, taking into account the function of direction indicators as hazard warning signals, and including amendments to Regulation No. 48.

Summary of test results to assess human responses to variable intensity direction indicators under various driving conditions.

Proposal to improve the draft text prepared in order to introduce provisions for direction indicator lamps with variable apparent surfaces.

Presentation highlighting concern over permissible indicator patterns under the proposed provisions for direction indicator lamps with variable apparent surfaces.

Proposal to introduce “interdependent lamps” into Regulation No. 6, taking into account the function of direction indicators as hazard warning signals, and to introduce provisions for direction indicator lamps with variable apparent surfaces.

Text prepared by the International Automotive Lighting and Light Signalling Expert Group (GTB) to amend the requirements relating to failure indication by removing the differentiation between filament and LED light sources. (Currently the provisions in UN Regulation No. 6 treat the failure of a lamp equipped with filament light sources differently to one equipped with LED. Similar requirements in UN Regulation No. 7 do not include this differentiation.)

Proposal from the secretariat to delete the reference to Category 3 and 4 from Annex 1, item 9, of UN R6 since these two categories appear to have been reintroduced by mistake through Amendment 3 to Revision 5 of the regulation.

Paragraph 6.2.2 of UN R6 specifies modes for triggering a failure tell-tale. This proposal would remove a specific reference to filament lamps so that the failure modes apply equally to both filament lamps and LED light sources.

Revision of the regulation on direction indicators pursuant to the proposal to simplify the UN lighting regulations.

Proposal to correct an error in Supplement 24 to the 01 series of amendments (document WP.29/2013/14 adopted by the Forum during its March 2013 session). During the compilation of the collective amendment (GRE-68-02-Rev.2), necessary changes to Regulation No. 6 were overlooked. This amendment proposes to align the treatment of categories 1, 1a and 1b with other categories and devices.

Proposal to align the text in the header row of the table in paragraph 6.1 (light emitted by the lamps) with the definitions used in Regulation No. 48 for the installation of “single lamps”, “lamps marked D” and “interdependent lamps”.

Request for interpretation on approvals of LED direction indicators integrated with daytime running lamps and using sequential activation of horizontal bars. Germany proposes a task for on sequential activation of direction indicators to develop clear provisions within the regulation, especially with regard to paragraph 5.6 (c): sequential activation … shall be one continuous line with no repeating alternation in the vertical direction.

Pursuant to interpretation issues raised by Germany at the seventy-fifth session of GRE, a Task Force on Sequential Activaton was established to clarify the meaning of the “one continuous line” requirement in paragraph 5.6.(c) of Regulation No. 6. The task force proposes to clarify the type definition and reduce the need for dividing sequential direction indicators into different types. This proposal revises the text to be more technology-neutral, removing specifications on how light sources are activated to focus on the visual performance as sequential lighting. The amendment of sub-paragraph 5.6.(c) of UN R6 clarifies what kind of vertical movement is not allowed in the sequential direction indicators, proposing a new new term “vertical oscillations” instead of the current wording “repeating alternation in the vertical direction”. The meaning is that not more than one change of direction upwards or downwards along the vertical axis is possible. The “continuous signal” is also defined in sub-paragraph 5.6.(c) of Regulation No. 6. The allowed distance between adjacent or tangential distinct parts has yet to be defined. TF-SA could not find a consensus about the distance (in mm) before the deadline for submitting official working documents to the seventy-sixth session of GRE. Thus, the value is still marked between square brackets, leaving the final decision to GRE. Before the seventy-sixth session of GRE, TF-SA experts are going to investigate what the suitable value would be. The idea of TF-SA is that the sequential direction indicator should produce a visually clear and continuous signal when viewed by an observer from a 10 m distance. The same amendments as in paragraph 5.6. of the UN R6 are also proposed to paragraph 6.8. of Regulation No. 50 for L-category vehicles. Unlike paragraph 1.3. of Regulation No. 6, paragraph 2.2. of Regulation No. 50 does not define the sequential activation as a type differentiation criterion. Therefore, amendments to paragraph 2.2. of Regulation No. 50 are not necessary.

Paragraph 6.5.3. of UN R48 prescribes the use of specific categories of front direction indicators in relation to their distance from the dipped beam headlamp or front fog lamp. However, the text allows categories 1a and 1b to be used at any distance greater than the minimum prescribed for each of them. The present text of UN R6, Annex 1, however, only allows a specific category to be used in the specific range of distance prescribed. Therefore, this proposal deletes the specific requirements in UN R6 and introduces a direct reference to the requirements in UN R48. This proposal effectively eliminates the need for a lower maximum value for the Category 1 front direction indicator than that of the other categories. Therefore, it is proposed to align the maximum luminous intensity value of Category 1 to that of Categories 1a and 1b.

The justification for changes to sub-paragraphs 5.6.(e) of Regulation No. 6 and 6.8.(e) of Regulation No. 50 is missing from document GRE/2016/20. The Task Force on Sequential Activation of direction indicators wishes to note that the paragraphs were proposed by GTB and accepted by the Task Force to clarify the text without changing the current technical requirements.

GTB proposal for incorporation of the DETA Universal Identifier approval mark into the UN Regulation on direction indicators.

Proposal to

1. insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources,
2. update the Conformity of Production requirements (CoP),
3. reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86, as warranted,
4. clarify the definition of “type”, with regard to manufacturer, trade names and marks,
5. introduce editorial improvements to the requirements for markings,
6. correct an oversight in Supplement 24 to the 01 series of amendments and align the treatment of categories 1, 1a and 1b with other categories and devices.
7. align the text in the header row of the table in paragraph 6.1 (light emitted by the lamps) with the definitions used in Regulation No. 48 for the installation of “single lamps”, “lamps marked D” and “interdependent lamps”, and
8. removes the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s).

Proposal to clarify and amend the supplement concerning sequential direction indicators adopted by GRE during its 76th session based upon document GRE/2016/20 and finalized in Annex IV of the session report. The proposal would clarify and move the prohibition against the mixing of signals of two or more activation modes to UN R48 and introduces transitional provisions.

Proposal to clarify the provisions for sequential activation of direction indicator lighting, especially concerning the interpretation of the phrase “one continuous line”. The proposal, developed by a special task force, clarifies the type definition and reduces the need for dividing sequential direction indicators into different types. This proposal revises the text to be more technology-neutral, removing specifications on how light sources are activated to focus on the visual performance as sequential lighting. The amendment of sub-paragraph 5.6.(c) of UN R6 clarifies what kind of vertical movement is not allowed in the sequential direction indicators, proposing a new new term “vertical oscillations” instead of the current wording “repeating alternation in the vertical direction”. The meaning is that not more than one change of direction upwards or downwards along the vertical axis is possible. The “continuous signal” is also defined in sub-paragraph 5.6.© of Regulation No. 6. The allowed distance between adjacent or tangential distinct parts is limited 50mm (which differs in this case from UN R48 specifications). Transitional provisions have been included.

Proposal to clarify the requirements for light sources in the lighting and light-signalling Regulations (including UN R6) listed in Annex 4 to Regulation No. 0 on the International Whole Vehicle Type Approval (IWVTA). The document title has been corrected to read “Supplement 28”.

Proposal to reinsert text in paragraph 1.3 concerning differentiation of types according to trade name or mark that was inadvertently omitted from Supplements 27 and 28 to the 01 series of amendments.

Proposal to reinsert text in paragraph 1.3 concerning differentiation of types according to trade name or mark that was inadvertently omitted from Supplements 27 and 28 to the 01 series of amendments.

Proposal from GRE to introduce transitional provisions for the phasing out of UN R6 in conjunction with the introduction of the new UN Regulation on Light-Signalling Devices (LSD).

Proposal from GRE to introduce transitional provisions for the phasing out of UN R6 in conjunction with the introduction of the new UN Regulation on Light-Signalling Devices (LSD).