Document GRE-68-02 from the Working Party “Brussels 1952” (GTB) proposes to amend the geometric visibility provisions of multiple lighting regulations. Since manufacturers have already developed lighting in line with the current definitions, OICA seeks a 48-month transition period.

Document GRE/2012/29 proposes to clarify the requirements for the mandatory manual override of the automatic/adaptive driving beam (ADB) function. While agreeing with the sub-menu prohibition, OICA proposes to delete the prohibition on “multi-step operations” so as not to restrict future designs.

OICA presentation on document GRE/2012/27, a proposal for Supplement 3 to the 05 series of amendments to UN R48 from Poland to replace the artificial 2,000 lm borderline and LED automatic leveling requirements with performance-based distance and glare criteria for headlamps.

Document GRE/2012/28 is a proposal from the Netherlands and the United Kingdom to further clarify the test conditions for the requirements on the sensitivity of the sensor system for automatic/adaptive driving beam. This OICA document notes that the presence of position lamps is optional.

Document GRE-68-04 is a proposal to insert provisions for the use of light source control gear in the case of halogen incandescent light sources. This proposal deletes limits on the main passing beam and responds to concerns raised by IEC in document GRE-67-30.

Document GRE/2012/44 would extend the scope of UN R10 to all kinds of power train systems above a certain working voltage level when they are in charging mode and enable the type approval of separate electrical components (ESA). OICA corrects and clarifies several points from the earlier proposal.

Overview of document GRE/2012/44 (proposal for the 05 series of amendments of UN R10) which would extend the scope of UN R10 to all kinds of power train systems above a certain working voltage level when they are in charging mode and enable the type approval of separate electrical components (ESA).

UN R7 has no requirements concerning changes in luminance of a lamp. Therefore, certain lamps which could not be installed in accordance with UN R48 could nonetheless obtain type approval and be sold in the aftermarket. This proposal would prevent such an occurrence.

GRE/2012/26 is a proposal from the Working Party “Brussels 1952” (GTB) to update provisions on heat resistance tests. This correction from GTB provides an improved justification for the proposed amendments.

Document GRE/2012/39 ( a proposal to introduce interdependent lamps (“Y” Lamps) into UN R87) did not take into account document WP.29/2012/78 submitted for adoption by WP.29 at its 158th (November 2012) session. Therefore, GTB proposes this new document to replace GRE/2012/39.

GRE/2012/40 is a proposal from the Working Party “Brussels 1952” (GTB) introducing a new category LW2 into the new draft Regulation for LED light sources [UN R127] and introducing some editorial amendments to the existing text. GTB proposes this correction to better align its wording with UN R37.

Proposal to delete the exemption for category M1 and N1 vehicles from the requirement for a minimum distance between the inner edges of two adjacent lighting surfaces.

Presentation of Polish opinion poll results in support of document GRE/2012/27, the proposal to replace the artificial 2,000 lm borderline and LED automatic leveling requirements with performance-based distance and glare criteria for headlamps.

Poland’s response to comments submitted by OICA (document GRE-68-20) regarding document GRE/2012/27 concerning the influence of headlamp initial aiming and leveling tolerances on road illumination distance.

GRE/2012/42 is a GTB proposal to amend the geometric visibility provisions. This document corrects GRE/2012/42 in line with the latest state of the subject regulations including amendments submitted for consideration at the November WP.29 session.

Additional supporting arguments for the proposal to modify the photometric performance requirements of front position lamps integrated with front fog lamps and of rear position lamps integrated with rear fog lamps (analogous to the treatment of position lamps integrated into headlamps).

Presentation with additional refinements to the submission from Poland to replace the artificial 2,000 lm borderline and LED automatic leveling requirements with performance-based distance and glare criteria for headlamps.

Presentation concerning China proposal to clarify definitions concerning testing of “resistance to atmospheric agents”.

Presentation reviewing flasher signals and technological advances in support of developing clearer parameters within UN R6 and R48 to govern variations of light signals.

Review of a study on driver perceptions of direction indicator performance.

Presentation on the GTB’s Coordination of Automotive Visibility and Glare Studies (CAVGS) task force activities.

Presentation on GTB survey of literature related to glare and visibility issues including accident data, visual acuity research, lamp aiming, etc.

Update on the CAVGS task force activities.

Document WP.29/2012/76 is a proposal for Supplement 14 to the 01 series of amendments to UN R53 to introduce bend lighting for motorcycles. IMMA proposes to keep the bank angle threshold for activation at five degrees rather than the proposed three degrees.

SAE comments on the Chinese proposal to update the ‘resistence to atmospheric agents’ test by applying the spectral energy distribution of sunlight as defined in CIE Publication No. 85:1989, Table 4.