Update by the IEC of the German proposal for revisions to align IEC 60809 and 60810 with UN Regulations for signalling devices to address risks in the use of low-quality non-replaceable filament lamps.

Submission from the International Electrotechnical Commission (IEC) to correct the omission of the letter “q” from the cap designation of category PR27/7W in Regulation No. 37.

During the 64th GRE session, GTB was charged to review and update the transitional provisions of Regulation 48. This draft proposal has been developed by the GTB Installation Working Group in close cooperation with OICA.

This is a generic proposal to require approval according to a light source
regulation prior to an application for approval under UN R10. It appears that LED retrofit light sources are offered to the market with Regulation No. 10 approval only where they should also be subject to the new UN R127.

Review of the IWVTA program, potential impact on UN Regulations, and request for Working Party (GR) support in reviewing and adapting, where warranted, the regulations being integrated into the proposed IWVTA system.

Proposed modifications to the German proposal (GRE/2012/20) to ensure that non-replaceable and unapproved filament light sources used in sealed devices and in (filament) light-source modules have a sufficient lifetime and fulfill color endurance verification.

Proposal from the WP.29 secretariat to correct the proposal for Supplement 10 to the 04 series of amendments to Regulation No. 48 pursuant to errors identified by OICA. Document WP.29/2012/73 seeks to align UN R48 with changes made to related lighting regulations.

Proposal to permit manufacturers to restrict the ability of the driver to permanently turn off manually the main beams and their automatic controls. This proposal would permit the use of time-delay systems that would reactivate the automatic system, tentatively suggesting a 10-second delay.

Proposal from the Working Group secretariat to correct errors and omissions in the Conformity of Production section of UN R10 concerning provisions for components and electrical/electronic subassemblies (ESA), in particular, with regard to their reference limits.

Overview of proposed system to permit whole vehicle type approvals among countries (Contracting Parties) with different requirements.

Draft of the proposed regulation to enable the international type approval of whole vehicles.

Updated proposal to clarify the deletion of distributed lighting systems (DLS), or rather light generators, from the Regulations No. 19, 48 and 98, because the provisions for the DLS systems are incomplete. This deletion was never fully complete while these systems have become obsolete.

Principal outcomes and action items resulting from the second meeting of the subgroup drafting revisions to the 1958 Agreement pursuant to the development of the International Whole Vehicle Type Approval (IWVTA) System.

Provisional agenda for the second meeting of the subgroup drafting revisions to the 1958 Agreement pursuant to development of the International Whole Vehicle Type Approval system.

Clarification of the principles concerning the application of earlier versions of a Regulation under the revised 1958 Agreement transmitted by the Chairman of the correspondence group drafting proposals for the revision of the 1958 Agreement.

Preliminary proposals for the revision of Article 1 (paragraphs 4, 7 and 8), Article 3, Article 11 and Article 12 of the 1958 Agreement transmitted by the Chairman of the correspondence group drafting proposals for the revision of the 1958 Agreement.

Preliminary proposals for revision of Article 2 and Appendix 2 transmitted by the Chairman of the correspondence group drafting proposals for the revision of the 1958 Agreement.

The proposed work schedule for the revision of the 1958 Agreement and establishment of UN R0 (e.g., the international whole vehicle type approval regulation) transmitted by Technical Secretary.

Initial proposal for restructuring the chapters, articles, and headings of the 1958 Agreement transmitted by the Chairman of the correspondence group drafting proposals for the revision of the 1958 Agreement.

Responses from Vietnam to questions provided by Japan during the 15th ASEAN Consultative Committee on Standards and Quality-Automotive Products Working Group (ACCSQ-APWG) in Cambodia concerning the 1958 Agreement and IWVTA. (ASEAN and Vietnam are working towards accession to the Agreement.)

Responses from Singapore to questions provided by Japan during the 15th ASEAN Consultative Committee on Standards and Quality-Automotive Products Working Group (ACCSQ-APWG) in Cambodia concerning the 1958 Agreement and IWVTA. (ASEAN and Singapore are working towards accession to the Agreement.)