Proposal from the Working Group secretariat to correct errors and omissions in the Conformity of Production section of UN R10 concerning provisions for components and electrical/electronic subassemblies (ESA), in particular, with regard to their reference limits.
45. The expert from OICA made a presentation (GRE-68-19) introducing ECE/TRANS/WP.29/GRE/2012/44. The proposal received several comments (GRE-68-08, GRE-68-12 and GRE-68-21). GRE agreed in principle with the proposal, however it was agreed to allow more time for experts to study the proposal in detail. GRE agreed to resume consideration of this subject at its next session on the basis of an updated document prepared by the expert from OICA.
33. The expert from OICA introduced ECE/TRANS/WP.29/GRE/2013/3 and Corr. 1 proposing to update the electromagnetic compatibility requirements for electrical vehicles. It was noted the absence of justification for raising the COP tolerance. GRE adopted the proposal ECE/TRANS/WP.29/GRE/2013/3 as amended by its Corr. 1 and a correction noted below. GRE requested the secretariat to submit it to WP.29 and AC.1 for consideration at their November 2013 sessions as draft 05 series of amendments to Regulation No. 10.
Appendix 8, figure 1, HV artificial network, R2 value in the table, amend to read:
“R2: 1 MΩ 100kΩ (discharging C2 to < 50 Vdc within 60 s)”
34. The Expert from OICA introduced GRE-69-26 Rev.1 proposing corrections to ECE/TRANS/WP.29/GRE/2013/3 and its Corr. 1. GRE agreed to resume consideration of GRE-69-26 Rev.1 on the basis of a revised document that the expert from OICA volunteered to prepare for the October 2013 session of GRE.