Documents
Agenda | Formal | Informal | Report |
Description (click for more information) Reference No.
Proposal to IEC (Germany)
GRE-67-01 10 Feb 2012 Working Party Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Filament Lamps Filament Lamps Uniform Provisions Concerning the Approval of Filament Lamps for Use in Approved Lamp Units of Power-driven Vehicles and of their Trailers Proposed revisions to IEC 60809 and 60810 in accordance with UN Regulations for signalling devices to address risks in the use of low-quality non-replaceable filament lamps. GRE-67-0001
Proposal to align IEC 60809 and 60810 with UN Regulations (IEC)
GRE-67-01/Rev.1 26 Sep 2012 Working Party Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Filament Lamps Filament Lamps Uniform Provisions Concerning the Approval of Filament Lamps for Use in Approved Lamp Units of Power-driven Vehicles and of their Trailers Update by the IEC of the German proposal for revisions to IEC 60809 and 60810 in accordance with UN Regulations for signalling devices to address risks in the use of low-quality non-replaceable filament lamps. GRE-67-0001/Rev.1
Draft proposal for Corrigendum 1 to Revision 5 of Regulation No. 6
GRE-67-02 10 Feb 2012 Working Party Direction Indicators Direction Indicators Uniform provisions concerning the approval of direction indicators for power-driven vehicles and their trailers Corrigendum from the Secretariat to remove a reference to categories 3 and 4 from the English version to UN R6-Revision 5. Categories 4 and 5 were previously removed from UN R6, but this reference was inadvertantly overlooked. GRE-67-0002
Proposal for a Corrigendum to Regulation No. 4 and to Regulation No. 23 (Germany)
GRE-67-03 10 Feb 2012 Working Party Illumination of rear-registration plates of motor vehicles and their trailers Rear Plate Lighting Uniform provisions for the approval of devices for the illumination of rear registration plates of motor vehicles (except motor cycles)and their trailers This proposal mainly corrects an unintended, but potentially costly, obligatory (rather than optional) use of mingled letters in the marking provisions of UN R23. The proposal also corrects the marking provisions of UN R4 and R23 by deleting an unnecessary hyphen. GRE-67-0003
Proposal for Corrigendum to Regulation No. 48 (Germany)
GRE-67-04 10 Feb 2012 Working Party Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices GRE created a Task Force on Conspicuity Marking to reconcile proposals concerning commercial vehicles contained in documents GRE/2011/53 and GRE/2011/62. The chair of the group offers this text as a compromise for GRE review. GRE-67-0004
Regulations for inclusion in International Whole Vehicle Type Approvals
GRE-67-05 01 Mar 2012 Working Party International Whole Vehicle Type Approval System (IWVTA) International Whole Vehicle Type Approval UN Regulation No. 0 on uniform provisions concerning the International Whole Vehicle Type Approval The International Whole Vehicle Type Approval system under development within WP.29 would encompass a host of individual subsystem UN Regulations. This document reviews the current thinking on the UN Regulations implicated in IWVTA and their application within this context for review by GRE. GRE-67-0005
Proposal for Supplement 40 to the 03 series of amendments of Regulation No. 37 (IEC)
GRE-67-06 01 Mar 2012 Working Party Filament Lamps Filament Lamps Uniform Provisions Concerning the Approval of Filament Lamps for Use in Approved Lamp Units of Power-driven Vehicles and of their Trailers Submission by the International Electrotechnical Commission (IEC) to clarify provisions in UN R37: Revision 6, to amend data in draft Supplement 39 (WP.29/2012/09) and to correct data in the proposal by GTB document GRE/2012/02. GRE-67-0006
Proposal for Supplement 8 to Regulation 99 (IEC)
GRE-67-07 01 Mar 2012 Working Party Gas-discharge Light Sources Gas-discharge Light Sources Uniform Provisions Concerning the Approval of Gas-discharge Light Sources for use in Approved Gas-discharge Lamp Units of Power-driven Vehicles Updates to UN R99 tables concerning certain references to International Electrotechnical Commission (IEC) publications. The text is based upon UN R99 up to and including draft Supplement 7 (document WP.29/2011/101). GRE-67-0007
Proposal for Supplement 10 of the 04 Series of amendments to Regulation No. 48 (France)
GRE-67-08 01 Mar 2012 Working Party Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Proposal that would align provisions in UN R48 with those of UN R121 (vehicle controlrs, telltales and indicators) with regard to the hazard warning telltale (para. 6.6.8.). GRE-67-0008
Proposal for Corrigendum 1 to Supp. 7 to the 04 series of amendments to UN R48 (GTB)
GRE-67-09 01 Mar 2012 Working Party Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Correction of an editorial error in Supplement 7 to the 04 series of amendments to UN Regulation 48. GRE-67-0009
Proposal for correct adoption of Supplement 3 to the 03 Series into UN R19-Rev. 6 (GTB)
GRE-67-10 01 Mar 2012 Working Party 1997 Agreement on Periodical Technical Inspections 1997 Agreement Agreement Concerning the Adoption of Uniform Conditions for Periodical Technical Inspections of Wheeled Vehicles and the Reciprocal Recognition of such Inspections WP.29 Session 155 adopted Supplement 3 to the 03 series of amendments to UN R19, which automatically also applies to the 04 series. However, the photometric table of para. 6.4.3 approved in the 03 series differs from that of the 04 series. Therefore, GTB proposes a correction to the 04 series. GRE-67-0010
Simplification of approval markings through “DETA” (GTB)
GRE-67-11 01 Mar 2012 Working Party Database for the Exchange of Type Approval Documentation DETA n.a. The GTB believes the Data Exchange for Type Approvals (DETA) system will enhance and simplify the current lighting approval markings. The GTB, however, recommends resolving questions concerning DETA administration, financing and try-out before further steps towards implementation. GRE-67-0011
Proposal for Amendment to Regulation No. 27 (CLEPA)
GRE-67-12 06 Mar 2012 Working Party Advance Warning Triangles Warning Triangles Uniform Provisions Concerning the Approval of Advance-Warning Triangles Proposal to update UN R27 in accordance with technological progress by establishing provisions for the use of fluorescent retro-reflective strip, enabling the consolidation of currently separate fluorescent (daytime) and retro-reflective (nighttime) striping. GRE-67-0012
Proposal for Supplement 10 to the 04 series of amendments to Regulation No. 48 (Japan)
GRE-67-13 21 Mar 2012 Working Party Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Proposal that would delete references to 'retro-reflecting devices' purusant to a decision of the Working Party on Lighting and clarify that testing of capabilities to detect and react to retro-reflecting devices is not required. GRE-67-0013
Proposal for Supplement 15 to Regulation No. 50 (IMMA)
GRE-67-14 21 Mar 2012 Working Party Position and Indicator Lamps for Motorcycles Motorcycle Lamps Uniform Provisions Concerning the Approval of Front Position Lamps, Rear Position Lamps, Stop Lamps, Direction Indicators and Rear-Registration Plate Illuminating Devices for Vehicles of Category L Submission of the International Motorcycle Manufacturers Association (IMMA) in order to change the inward visibility angle of front position lamp in Regulation No. 50. GRE-67-0014
Proposal for draft amendment to Regulation No. 53 (IMMA)
GRE-67-15 21 Mar 2012 Working Party Installation of Motorcycle Lighting Motorcycle Lighting Uniform Provisions Concerning the Approval of Category L3 Vehicles with regard to the Installation of Lighting and Light-signalling Devices Submission of the International Motorcycle Manufacturers Association (IMMA) in order to change the inward visibility angle of front position lamp in Regulation No. 53. GRE-67-0015
Proposal for Corrigendum to Document GRE/2012/10 (Germany)
GRE-67-16 21 Mar 2012 Working Party Headlamps Equipped with Gas-discharge Light Sources Gas-discharge-light Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Equipped with Gas-discharge Light Sources Headlamps Emitting an Asymmetrical Passing Beam Asymmetrical Beam Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Emitting an Asymmetrical Passing Beam or a Driving Beam or Both and Equipped with Filament Lamps and/or Light-Emitting Diode (LED) Modules Adaptive Front-lighting Systems Adaptive Front-lighting Systems Uniform Provisions Concerning the Approval of Adaptive Front-lighting Systems (AFS) for Motor Vehicles Submitted by Germany to correct a mistake in the original document from the GTB that proposes to introduce amendments to improve the accuracy of the test procedures to verify the stability of the photometric performance. GRE-67-0016
IEC comments on document GRE/2012/12 (IEC)
GRE-67-17 21 Mar 2012 Working Party Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Headlamps Emitting an Asymmetrical Passing Beam Asymmetrical Beam Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Emitting an Asymmetrical Passing Beam or a Driving Beam or Both and Equipped with Filament Lamps and/or Light-Emitting Diode (LED) Modules IEC has serious concerns with the proposal to clarify the conditions under which voltage control gear may be used in conjunction with filament light sources because halogen filament light sources should not be operated permanently outside the specifications, at a too low or at too high voltage. GRE-67-0017
Proposal for Addendum to document GRE/2012/7 (GTB)
GRE-67-18 23 Mar 2012 Working Party Sealed Beam European Headlamps for Motor Vehicles Halogen SB Headlamps Uniform Provisions Concerning the Approval of Power-driven Vehcile's Halogen Sealed-Beam Headlamps (HSB) Emitting a European Asymmetrical Passing Beam or a Driving Beam or Both During the preparation of the proposal in GRE/2012/7 to update the definition of "type", the corresponding amendment to Regulation No. 31 was unintentionally omitted. This addendum completes the collective amendment. GRE-67-0018
Proposal for amendments to Regulations Nos. 19, 48 and 98 (Germany)
GRE-67-19 23 Mar 2012 Working Party Front Fog Lamps Front Fog Lamps Uniform Provisions Concerning the Approval of Power-driven Vehicle Front Fog Lamps Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Headlamps Equipped with Gas-discharge Light Sources Gas-discharge-light Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Equipped with Gas-discharge Light Sources Proposal to clarify the deletion of distributed lighting systems (DLS), or rather light generators, from the Regulations No. 19, 48 and 98, because the provisions for the DLS systems are incomplete. This deletion was never fully completed and in the meantime these systems have become obsolete. GRE-67-0019
Brief notes from the 63rd WP.1 session
GRE-67-20 26 Mar 2012 Working Party 1968 Vienna Convention on Road Traffic 1968 Vienna Convention Convention on Road Traffic Notes on Working Party 1 consideration of WP.29/GRE proposals to update the 1968 Vienna Convention on Road Traffic in line with advances in automated lighting technologies. GRE-67-0020
Proposal for amendment to document GRE/2012/15 (IMMA)
GRE-67-21 26 Mar 2012 Working Party Installation of Motorcycle Lighting Motorcycle Lighting Uniform Provisions Concerning the Approval of Category L3 Vehicles with regard to the Installation of Lighting and Light-signalling Devices Proposal to add “less than 5 degrees” as a test condition in order to prohibit the unintended use of bend lighting in the proposal for collective amendments to Regulations Nos. 53 and 113 on bend lighting for motorcycles. GRE-67-0021
Proposal for Supplement 40 to the 03 series of amendments of Regulation No. 37 (IEA)
GRE-67-22 26 Mar 2012 Working Party Filament Lamps Filament Lamps Uniform Provisions Concerning the Approval of Filament Lamps for Use in Approved Lamp Units of Power-driven Vehicles and of their Trailers Revised proposal from the International Electrotechnical Commission (IEC) to amend data in draft Supplement 39 (WP.29/2012/09) and to correct data in the proposal by GTB document GRE/2012/02. This proposal supercedes document GRE-67-06. GRE-67-0022
Modified provisional agenda for the sixty-seventh GRE session
GRE-67-23 26 Mar 2012 Working Party Corrections and additions to the agenda for the 26-29 March 2011 session of the Working Party on Lighting. GRE-67-0023
Incorporation of Standardised Replaceable LED Light Sources into UN Regulations (GTB)
GRE-67-24 26 Mar 2012 Working Party Illumination of rear-registration plates of motor vehicles and their trailers Rear Plate Lighting Uniform provisions for the approval of devices for the illumination of rear registration plates of motor vehicles (except motor cycles)and their trailers Light-Emitting Diode Light Sources LED Light Sources Uniform provisions concerning the approval of light emitting diode (LED) light sources for use in approved lamp units on power-driven vehicles and their trailers Direction Indicators Direction Indicators Uniform provisions concerning the approval of direction indicators for power-driven vehicles and their trailers Position, Stop and End-outline Lamps Position, stop and end-outline lamps Uniform Provisions Concerncing the Approval of Front and Rear Position (Side) Lamps, Stop-Lamps and End-Outline Marker Lamps for Motor Vehicles (Except Motor Cycles)and their Trailers Reversing Lights Reversing Lights Uniform Provisions Concerning the Approval of Reversing and Manoeuvring Lamps for Power-driven Vehicles and their Trailers Rear Fog Lamps Rear Fog Lamps Uniform Provisions Concerning the Approval of Rear Fog Lamps for Power-driven Vehicles and their Trailers Position and Indicator Lamps for Motorcycles Motorcycle Lamps Uniform Provisions Concerning the Approval of Front Position Lamps, Rear Position Lamps, Stop Lamps, Direction Indicators and Rear-Registration Plate Illuminating Devices for Vehicles of Category L Parking Lamps Parking Lamps Uniform Provisions Concerning the Approval of Parking Lamps for Power-driven Vehicles Daytime Running Lamps Daytime Running Lamps Uniform Provisions Concerning the Approval of Daytime Running Lamps for Power-driven Vehicles Side-Marker Lamps Side-Marker Lamps Uniform Provisions Concerning the Approval of Side-Marker Lamps for Motor Vehicles and their Trailers Cornering Lamps Cornering Lamps Uniform Provisions Concerning the Approval of Cornering Lamps for Power-driven Vehicles The Forum adopted a new UN Regulation on LED light sources at its March 2012 session. This document updates the collective amendment that introduces LED light sources into the relevant UN Regulations 4, 6, 7, 23, 38, 50, 77, 87, 91 and 119. GRE-67-0024
Proposal for Supplement 10 to the 04 series of amendments to Regulation No. 48 (OICA)
GRE-67-25 26 Mar 2012 Working Party Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Proposal from OICA to further clarify the test conditions regarding the requirements for the sensitivity of the sensor system for ADB (automatic/adaptive driving beam). GRE-67-0025
Proposal for Supplement 10 to the 04 series of amendments to Regulation No. 48 (OICA)
GRE-67-26 26 Mar 2012 Working Party Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Proposal to improve the wording of the informal document GRE-67-08 submitted by France to align provisions in UN R48 with those of UN R121 with regard to the hazard warning telltale. GRE-67-0026
OICA comments on Polish headlamp aiming proposal GRE/2012/21 (OICA)
GRE-67-27 27 Mar 2012 Working Party Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices OICA presentation raising numerous concerns with the Polish proposal (document GRE/2012/21) to introduce performance-based requirements for headlamp aiming/leveling and glare tolerances. GRE-67-0027
Proposal for Corrigendum to Regulation No. 48 (CLEPA)
GRE-67-28 26 Mar 2012 Working Party Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Proposal from CLEPA submitted as an alternative to the German proposal (document GRE-67-04) concerning conspicuity markings for the cab of commercial vehicles. GRE-67-0028
Commercial vehicle conspicuity markings (CLEPA)
GRE-67-29 26 Mar 2012 Working Party Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Illustrations to accompany the CLEPA proposal concerning conspicuity markings for commercial vehicles (document GRE-67-28). GRE-67-0029
Voltage control gear in relation to halogen filament light sources (IEC)
GRE-67-30 28 Mar 2012 Working Party Headlamps Emitting an Asymmetrical Passing Beam Asymmetrical Beam Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Emitting an Asymmetrical Passing Beam or a Driving Beam or Both and Equipped with Filament Lamps and/or Light-Emitting Diode (LED) Modules Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices IEC response to the GTB proposal to define the conditions under which voltage control gear may be used in conjunction with filament light sources. GRE-67-0030
Proposal for revision of the transitional provisions of Regulation No. 48 (EC)
GRE-67-31 27 Mar 2012 Working Party Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Regulation No. 48 will soon be made mandatory in the EU. This proposal aims mainly at launching a discussion on consistency and management of the transitional provisions of Regulation No. 48. GRE-67-0031
Proposal for Supplement 10 to the 04 series of amendments to Regulation No. 48 (Japan)
GRE-67-32 27 Mar 2012 Working Party Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Proposal from Japan, based upon the request from OICA and superceding document GRE/2012/14, to clarify the "fixed position of a movable component". GRE-67-0032
GRE/2012/21: How and why? (Poland)
GRE-67-33 27 Mar 2012 Working Party Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Presentation of the Polish Motor Transport Institute in support of the proposal to replace fixed values for headlamp aiming and tolerances with performance-based specifications. GRE-67-0033
Proposal for an amendment to R.E.3 and for a new definition in S.R. 1
GRE-67-34 28 Mar 2012 Working Party RE3 Construction of Vehicles RE3 Consolidated Resolution on the Construction of Vehicles Proposal from the Secretariat to add a definition for the term "manufacturer" to the Consolidated Resolution on the Construction of Vehicles (RE3) and to the Special Resolution No. 1 (SR1). RE3 and SR1 respectively define the terms used in UN Regulations and Global Technical Regulations. GRE-67-0034
Status report on the Horizontal Reference Document for lighting equipment
GRE-67-35 28 Mar 2012 Working Party Simplification of Lighting Regulations SLR To be determined. The HRD was conceived as a repository for lighting requirements shared across multiple rules. However, active support has been insufficient to move forward. This submission proposes to suspend the effort pending an EC-sponsored WP.29 effort to improve the Forum's rule development processes. GRE-67-0035
Proposal for amendments to Regulation No. 48 (OICA)
GRE-67-36 28 Mar 2012 Working Party Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Comments from OICA on the German proposal to reconcile views on conspicuity markings for commercial vehicles (document GRE-67-04). GRE-67-0036
Proposal for Supplement 2 to the 05 series of amendments to Regulation 48 (Poland)
GRE-67-37 29 Mar 2012 Working Party Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Revised version of Poland's proposal (GRE/2012/21) to introduce performance-based distance and glare criteria for headlamps, replacing the fixed 2000 lm luminous flux condition as a criterion of the automatic leveling requirement. GRE-67-0037
Proposal for Corrigendum to Regulation No. 48 (Germany)
GRE-67-38 29 Mar 2012 Working Party Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Submission by the chair of the Task Force on Conspicuity Marking presenting the compromise agreed at GRE-67 for commercial vehicle markings: cumulative horizontal marking length of 70% and allowing alternative minimum marking of the cab by retro-reflectors. GRE-67-0038
GTB Task Force: Coordination of Automotive Visibility and Glare Studies update (GTB)
GRE-67-39 13 Apr 2012 Working Party Presentation on priorities and work of the GTB (International Automotive Lighting and Light Signalling Expert Group). GRE-67-0039
GTB Working Group: Light Sources update (GTB)
GRE-67-40 13 Apr 2012 Working Party Presentation on priorities and work of the GTB (International Automotive Lighting and Light Signalling Expert Group). GRE-67-0040
GTB Working Group: Signal Lighting update (GTB)
GRE-67-41 13 Apr 2012 Working Party Presentation on priorities and work of the GTB (International Automotive Lighting and Light Signalling Expert Group). GRE-67-0041
GTB Working Group: Photometry update (GTB)
GRE-67-42 13 Apr 2012 Working Party Presentation on priorities and work of the GTB (International Automotive Lighting and Light Signalling Expert Group). GRE-67-0042
Review of the SAE proposal for amendments to ECE – R 65 (GTB)
GRE-67-43 13 Apr 2012 Working Party Special Warning Lamps Special Warning Lamps Uniform Provisions Concerning the Approval of Special Warning Lamps for Motor Vehicles Proposed changes to the SAE proposal (GRE/2011/48) to clarify requirements for the special warning lamp while allowing for harmonization with the requirements for emergency warning lamps as prescribed by SAE. GRE-67-0043
Documents
Agenda | Formal | Informal | Report |