Proposal to clarify:

1. how to assess safety-belt reminder connection, in the case of removable seats and
2. safety-belt reminder systems test procedure (first and second level warning), visual warning and requirements for safety-belt reminder of rear seat row(s).

Proposal to define minimum safety-belt installation specifications for forward-facing seats which face a Child Restraint System in M₂ and M₃ vehicles.

Proposal to enable approval of all vehicles and seating positions with regard to the strength of seats and their anchorages and with regard to their head restraints (in addition to M₁ and N₁ under UN R17.

Proposal to ensure that only safe head restraints are fitted to seats of any seating position in all vehicle categories within the scope of UN R17 and to extend the test performance of paragraph 5.7.4 (height retention of head restraints) to non-adjustable head restraint with only one position of use.

Proposal to facilitate identification of electric vehicles.

Proposal to add provisions for the GTR 9 Deployable Pedestrian Protection Systems Generic Vehicle (GV) Models.

Proposal to transpose Amendment 1 to UN GTR13, Phase 2 (GTR13-PH2) into UN R134.

Proposal form the Ad Hoc Group on Child Restraint Systems to introduce definitions, requirements and a test procedure for lower tether anchorages.

Proposal to introduce provisions for labelling/identifying buses and trucks equipped with an electric drivetrain in a manner consistent with similar provisions already provided for vehicles fueled by Liquified Petroleum Gas (LPG), Compressed Natural Gas (CNG), Liquid Natural Gas (LNG) and Compressed Hydrogen (H2).

Proposal to clarify the single belt route principle mentioned in paragraph 3.2.2.

Proposal to introduce definitions, requirements and a test procedure for lower tether anchorages.

Proposal to introduce definitions, requirements and a test procedure for lower tether anchorages.

Proposal to restrict use of the colour green exclusively to the marking belt route indicators.

Proposal to prevent the approval mark from being replaced by a Unique Identifier (UI) in UN Regulation No. 16.

Proposal to clarify the direction of impact in the mechanical integrity test.

Proposal to clarify the direction of impact in the mechanical integrity test.

Proposal to introduce requirements for the post-crash safety of hydrogen-fuelled vehicles based on the Amendment 1 to UN GTR No. 13 (Hydrogen and Fuel Cells Vehicles).

Proposal to introduce performance and testing specifications for deployable pedestrian protection systems (DPPS).

Proposal s to introduce requirements concerning post-crash safety of hydrogen-fuelled vehicles based on the Amendment 1 to UN GTR No. 13 (Hydrogen and Fuel Cells Vehicles).

Proposal to introduce requirements for the post-crash safety of hydrogen-fuelled vehicles based on Amendment 1 to UN GTR No. 13 (Hydrogen and Fuel Cells Vehicles).

Proposal to introduce requirements concerning post-crash safety of hydrogen fuelled vehicles based on the Amendment 1 to UN GTR No. 13 (Hydrogen and Fuel Cells Vehicles).

Proposal to introduce requirements for the post-crash safety of hydrogen-fuelled vehicles based on the Amendment 1 to UN GTR No. 13 (Hydrogen and Fuel Cells Vehicles).

Proposal to introduce requirements for the post-crash safety of hydrogen-fuelled vehicles based on the Amendment 1 to UN GTR No. 13 (Hydrogen and Fuel Cells Vehicles).

Presentation on the background and scope of the proposal to amend

Proposal to enhance the safety of the belted passenger seated behind a seat by removing the two of the derogations for two-point belts and supports the usage of three-point belts also in buses.

This Regulation applies to Built-in Child Restraint Systems installed in vehicles of categories M2 and M3 class B and class III with regards to the securing of children from 40 – 150 cm in forward facing and rearward facing vehicle seats.

The text reproduced below was prepared by the expert from the Informal Working Group on the Deployable Pedestrian Protection Systems of UN Global Technical Regulation No. 9 to propose provisions on the development of HBM qualification corridors for Annex 2 to GTR No. 9.

The proposal aimed to an identification of buses and trucks equipped with an electric drivetrain which is consistent with existing regulated identification for Liquified Petroleum Gas (LPG), Compressed Natural Gas (CNG), Liquid Natural Gas (LNG) and Compressed Hydrogen (H2) fuelled trucks and buses.

Discussion on the introduction of technical requirements applying to the bus front to reduce the extent of damage and injury in connection with potential frontal impact accidents. It has also been raised by the labour unions that buses need to become more crash resistant. Plan is to change the scope and perhaps add a new section for testing the front of the buses. Alternatively make a new regulation for frontal protection for buses.

Proposal to harmonise transitional provisions and to clarify the requirements for safety-belt reminder of rear seat row(s)

This proposal resolves editorial issues and aims to introduce requirements for the post-crash safety of hydrogen-fuelled vehicles.

Proposal aims to resolve editorial issues and to introduce requirements for the post-crash safety of hydrogen-fuelled vehicles.

Proposal aims to resolve editorial issues and to introduce requirements for the post-crash safety of hydrogen-fuelled vehicles based on the Amendment 1 to UN GTR No. 13 (Hydrogen and Fuel Cells Vehicles).

Proposal aims to resolve editorial issues and to introduce requirements for the post-crash safety of hydrogen-fuelled vehicles based on the Amendment 1 to UN GTR No. 13 (Hydrogen and Fuel Cells Vehicles)

Proposal aims to resolve editorial issues and to introduce requirements for the post-crash safety of hydrogen-fuelled vehicles based on the Amendment 1 to UN GTR No. 13 (Hydrogen and Fuel Cells Vehicles).

Proposal from Informal Working Group (IWG) on hydrogen and fuel cell vehicles (HFCV) to correct editorial errors

Proposal to clarify the meaning of the words “at any” in paragraph 2 of Annex 13 of the 10 series of amendments

Proposal to clarify the meaning of the word “or” in paragraph 6.15.1.13 of the 03 series of amendments

Proposal to clarify the conditions under which Enhanced Child Restraint Systems must be tested in a vehicle body shell.

Proposal to clarify the figures of Annex 5 – Appendix 2 and reintroduce legends which had been removed in series 2 of amendments

Proposal to clarify the figures of Annex 5 – Appendix 2 and reintroduce legends which had been removed in series 2 of amendments

Proposal to update the references to the ISO standards in Mutual Resolution 1 (M.R.1), Addendum 2 (WorldSID)

Proposal to that information about electric safety on a label may not be necessary if the proposed requirement in UN 134 have been met

Proposal to clarify the direction of impact in the mechanical integrity test.

Proposal to clarify the direction of impact in the mechanical integrity test.

Proposal to transpose the amendment 1 to UN GTR 13, Phase 2 (GTR13-PH2) into the UN regulation under the 1958 Agreement.

To align the French translation with the English text on Thermal propagation.

For M2 and M3 vehicle of all classes, when an adult seating in a forward-facing seat which face a built in Child Restraint system, an impact between the adult and the child shall be prevented. In order to prevent the impact between the occupants a 3-point belt is requested on the adult seating position. The text has been proposed to be updated in the UN Regulation 16 Supplement 05 to 08 series of amendments, it seeks to harmonize requirements in both UN Regulation 14 and UN Regulation 16.

The proposed amendment does not intend to change the requirements nor the level of stringency. The footnote to paragraph 3.2.2. is added to further clarify the definition of the use of a one belt route. In its current state, the text apparently has been interpreted as to allow the use of a single belt route for each application that an Enhanced Child Restraint System (ECRS) would offer. That way, one belt route for a rearward facing ECRS (integral) and a second belt route for a forward facing (non- integral) ECRS has been introduced, making a combination of C and E.

Proposal to reflect the size ranges used in UN R129, OICA suggests using the stature of 100 cm (which is approximately a child weighing 18 kg). This would be aligned with the requirement that non-integral ECRS are not allowed for children with a stature of less than 100 cm (6.1.3.3.) and also with the requirement for toxicity testing in 6.3.1.1 (para 6.3.1.1 does not apply to non-integral ECRS with a stature range of 100 cm or above).

Proposal to amend the provisions for the DPPS Generic Vehicle (GV) Models. This Addendum provides the specifications for the generic vehicle models to be used for the qualification of pedestrian models for HIT determination according to [ GTR No.9 amendment 3 Annex 2 ]. The models and their usage are specified.

The text reproduced prepared by the Ad Hoc Group on Child Restraint Systems to introduce definitions, requirements and a test procedure for lower tether anchorages.

The text prepared by the Ad Hoc Group on CRS, aiming to introduce definitions, requirements and a test procedure for lower tether anchorages.

The text prepared by the Ad Hoc Group on Child Restraint Systems, aiming to introduce definitions, requirements and a test procedure for lower tether anchorages.

Proposal aims to resolve editorial issues and to introduce requirements for the post-crash safety of hydrogen-fuelled vehicles based on the Amendment 1 to UN GTR No. 13 (Hydrogen and Fuel Cells Vehicles).

Proposal from the GTR 13-Phase 2 informal group to correct editorial errors in Amendment 1.

Proposal to introduce provisions for the specifications and calibration procedure of the 3-D “H”-point machine and the procedure for determining the “H”-point and the actual torso angle for seating positions in motor vehicles, to be used in all referenced UN Regulations and GTR.

Proposal to enhance the safety of the belted passenger seated behind a seat by removing the two of the derogations for two-point belts in buses and coaches laid down in paragraphs 5.3.5. to 5.3.5.4.

Proposal for the DPPS informal group to introduce provisions for deployable pedestrian protection systems (DPPS) into the GTR.

Proposal from the Deployable Pedestrian Protection Systems informal group (IWG-DPPS) on UN Global Technical Regulation No. 9 to introduce provisions for the Qualification of Human Body Models for pedestrian Head Impact Time (HIT) determination as a DPPS prerequisite.

Proposal to add anchorage positions to enable alternative seating positions (with a higher seatback inclination than today) during driving.

Proposal to enhance the safety of the belted passenger seated behind a seat by removing two derogations for buses and coaches for two-point belts.

Proposal to limit slack of the safety-belt buckle in rear seats to improve occupant safety.

Proposal to amend the requirement concerning for the thorax compression criterion (ThCC) of the 5th Female dummy in the case of vehicles of category N₁.

Proposal to introduce provisions for identification of buses and trucks equipped with an electric drivetrain consistent with existing regulated identification for Liquified Petroleum Gas (LPG), Compressed Natural Gas (CNG), Liquid Natural Gas (LNG) and Compressed Hydrogen (H2) fueled trucks and buses.

Proposal to introduce provisions for identification of buses and trucks equipped with an electric drivetrain in a manner consistent with existing regulated identification for Liquified Petroleum Gas (LPG), Compressed Natural Gas (CNG), Liquid Natural Gas (LNG) and Compressed Hydrogen (H2) fueled trucks and buses.

Proposal to clarify the conditions under which Enhanced Child Restraint Systems must be tested in a vehicle body shell.

Proposal to define the judgement phase of the dynamic seat belt component test on the sled as limited up to the point where the manikin contacts the seat back during its backward movement after impact.

Explanations and clarifications concerning the “one belt route” provisions.

Proposal from the task force on the Transposition of GTR 13 Phase 2 amendments into UN R134.

Proposal from the Informal Working Group on UN Global Technical Regulation No. 13, Phase 2 to add further editorial corrections to the original proposal for Corrigendum 1.

Aims to clarify which folding seats are exempt from the SBR requirements. The wording “fitted in the access passages of vehicles of category M2 or M3” means to cover folding seats located in the entry/exit areas of buses and coaches as well as folded/stowed seats for occasional usage in the aisle areas of such vehicles. The wording “fitted to N1 or N2 for the safe ingress and egress of the driver via the front passenger door” means to cover folding seats that can typically be found in delivery vans, and where this front passenger door is frequently used by the driver to safely exit the vehicle (on the vehicle side away from traffic).

Proposal for Supplements to introduce alternative anchorage positions UN R14 in order to enable extended use positions.

also applicable to Supplement 3 to the 03 series of amendments

The proposal aims to update the requirements on post-crash electrical safety

Proposal to enable use of a rigid plastic speaker simulator in lieu of the current deformable simulator to facilitate and reduce the costs of testing.

Proposal to clarify how to perform the buckle-opening test under point 7.8. of the regulation.

Proposal to introduce provisions for the specifications and calibration procedure of the 3-D “H”-point machine and the procedure for determining the “H”-point and the actual torso angle for seating positions in motor vehicles for use across all relevant UN Regulations and GTR.

Final report on the development of provisions for deployable pedestrian protection systems (DPPS).

Proposes provisions on DPPS (Deployable Pedestrian Protection Systems)

Explanatory presentation to …/GRSP/2023/38 – Clarification of test bench vs. bodyshell testing

Proposal to enable identification of buses and trucks equipped with an electric drivetrain.

Propose a new Addendum 5 on provisions for the specifications for the Qualification of Human Body Models for pedestrian Head Impact Time (HIT) determination as a DPPS prerequisite.

Proposal to allow installation of a dummy protective device on the UN R129 bench in the dynamic frontal test with a universal booster cushion. (Also proposed as Supplement 11 to the 03 series of amendments).