Proposal to amend the bumper test area procedures under the pedestrian safety GTR.
This proposal includes the “bumper beam measurement” in the procedure.

Proposal to introduce a definition for “bucket seat” ( front passenger seat having a non-adjustable seat back) which would be exempt from the ISOFIX anchorage requirements. The proposal also exempts certain vehicle/seating configurations from ISOFIX requirements, addressing cases where the vehicle design and purpose mitigate against the use of such child restraints and ISOFIX systems.

Proposal to clarify dynamic testing, rear seat system, advanced restraint system approval, and transitional provisions under UN R16.

Text prepared by the UN R44 Technical Services Group to clarify the regulation, including test failure parameters, CRS displacement or locking systems, seat installation color coding systems, and use of load limiting devices. The test procedure would be modified, including an increase in the applied load to exceed the maximum allowed resistance to permit sliding of the strap through the quick adjuster and through rigid parts, increased tolerances related thereto, deletion of the option for shorter shift (deemed unnecessary since it is a test on the strap, not on the complete component), and modification of drawings to improve consistency with the text.

Proposal to amend the toxicity and flammability declarations via references to EN71 (European safety standards).

Proposal to amend the regulation frontal impacts with a view towards the establishment of a new regulation on frontal impact testing for occupant restraint systems (full width rigid barrier test). The proposal increases the thorax compression criterion (ThCC) stringency to 42 mm (from 50 mm).

Draft new Regulation prepared by the Informal Working Group on Frontal Impact to establish uniform provisions for the approval of passenger cars with regard to their occupant-restraint system performance in the event of a frontal collision.

Proposal from the Bumper Test Area Task Force to revise the procedure for determining the bumper test area under the pedestrian safety regulation. The proposal introduces a “bumper beam” method for determining the test area and includes a September 2017 transition date.

Proposal from the Informal Working Group on Frontal Impact to increase the stringency of the Thorax Compression Criterion (ThCC) for the Hybrid III 5th female dummy in the passenger seat to 34 mm under the proposed new regulation to test the performance of occupant restraint systems in the event of a frontal collision. The transition date would be 1 September 2020.

Proposal to allow the installation of different light colours on seat-belt buckles to improve visibility. The proposal also addresses the alignment of ambient light designs in modern cars with the functional element of an occupant protection device to support its visual exposition in the vehicle compartment.

Proposal for Supplement 7 to the 06 series of amendments to Regulation No. 14 and for Supplement 6 to the 06 series of amendments to Regulation No. 16 to clarify the texts related to the recently expanded height requirements for the effective upper belt anchorage (Supplement 4 to the 07 series of amendments to Regulation No. 14).

Proposal to extend the scope of UN Regulation No. 129 to include non-Integral child restraint systems (“Universal Booster” or “Specific to vehicle Booster”) (Development Phase 2 of the UN Regulation).

Proposal to clarify the installation provisions for “general use” safety-belts (Annex 1B, item 12).

Proposal to expand the application area of the energy absorption criteria for seating in order to facilitate the optimization of seat-belt load limiters by allowing limited occupant contact with these seat areas.

Updated proposal to clarify dynamic testing, rear seat system, advanced restraint system approval, and transitional provisions under UN R16, superseding document GRSP/2015/4.

Editorial clarification of the proposed transitional provision from the WP.29 secretariat..

Pursuant to GRPE work on vehicle propulsion system definitions (VPSD informal group; see document WP.29-165-17), this proposal would update the definition of the acronym “REESS” to refer to “rechargeable electrical energy storage system” across the passive safety regulations and currently proposed texts that make use of this acronym. (REESS had previously referred generically to “rechargeable energy storage systems”.)

Proposal to modify the reference to Annex 14 on simplified test methods to refer to “the use of a reference chest speed measured at 300 mm forward displacement carried out in a test”.

In response to a request during the December 2014 GRSP session to resume discussions on helmet safety and electric bikes, the secretariat has prepared this background note.

Proposal to add missing Integral fixtures for Regulation 129. Fuller explanation can be found in document GRSP-57-09.

Proposal to add missing Integral fixtures for Regulation No. 129. Fuller explanation can be found in document GRSP-57-09.

OICA comments and concerns regarding the generally accepted proposal for the definition of the bumper test area for use with the Flex-PLI lower leg impactor. The document raises issues concerning limitations of the test procedure and notes that the new requirements would have a significant impact on bumper design such that the transitional period for implementation should be 2019 to allow for a full vehicle development cycle.

Formal proposal as generally agreed during the 56th GRSP session to revise the procedure for determining the bumper test area under the pedestrian safety regulation. This proposal corrects shortcomings in the current definitions which could lead to a narrower test area than intended (leading to less effective pedestrian protection). This proposal includes a “bumper beam” determination method. The proposed changes also require the form of a new series of amendments (rather than a Supplement) and proposes a transition date of 1 September 2019 (rather than the previous 2017).

The proposal also includes a September 2017 transition date in the event that the GRSP determines that the proposal should be treated as a new series of amendments rather than as a Supplement.

Proposal to amend document GRSG/2015/8 which would revise the procedure for determining the bumper test area under the pedestrian safety regulation.

Proposal to improve the belt routing and positioning of the universal child restraint system seat fixture during testing.

Status report on the development of a global technical regulation to address high voltage electrical safety in electric vehicles and their components (such as recharging inlets and rechargeable electric energy storage systems (REESS)). The draft regulation especially concerns flammable electrolytes and covers both in-use and post-crash environments.

Revised version of the proposal (formal document GRSP/2015/9 ) to extend the scope of UN Regulation No. 129 to include non-Integral child restraint systems (“Universal Booster” or “Specific to vehicle Booster”). This version includes all corrections to the text made by the Informal Working Group on Child Restraint Systems through it 6 May 2015 session.

Revised amendment, including track changes, to introduce all the modifications needed in UN Regulation No. 129 (Enhanced Child Restraint System (ECRS)) that were suggested by the experts of the informal working group on Child Restraint Systems (IWG CRS) to extend the scope of this Regulation to Non-Integral child restraint systems (“Universal Booster” or “Specific to vehicle Booster”) (Phase 2 of the UN Regulation).

Request for clarification concerning head restraint testing configurations.

Updated document including comments received from Germany, Japan, the Russian Federation and the United States of America.

Proposal to clarify what is and what is not permitted on airbag labels in order to address deviations encountered in current labeling.

Proposal to allow the installation of different light colours on seat-belt buckles to improve visibility. The proposal also addresses the alignment of ambient light designs in modern cars with the functional element of an occupant protection device to support its visual exposition in the vehicle compartment. This document supersedes GRSP/2015/15.

Proposal to require seat-belt reminders for all seating positions, including rear positions, and to clarify the scope of the regulation.

Companion presentation to the proposal contained in document GRSP-57-17.

Proposal to introduce provisions to prevent the unintentional opening of side doors with rear-mounted hinges while the vehicle is in motion.

Further refinements from the European Commission to the proposal to amend the bumper test area procedures under the pedestrian safety GTR.

Text prepared the European Association of Automotive Suppliers (CLEPA) to clarify the provisions for dynamic testing of rear seat systems, advanced restraint system approval and transitional provisions. It supersedes document GRSP/2015/4 and GRSP/2015/16.

Text prepared by the Informal Working Group on Frontal Impact (IWG FI) as an outcome of discussions of the Working Party on Passive Safety (GRSP) at its fifty-seventh session on developing a separate new Regulation on frontal impact focusing on requirements for restraint systems.

Proposal to require seat-belt reminders for all seating positions, including rear positions, and to clarify the scope of the regulation.

Proposal to introduce provisions for a new fixture to verify space availability of universal lateral facing “lie-flat” Child Restraint Systems.

Proposal to clarify and improve the belt routing and positioning of the universal child restraint system seat fixture during testing.

The provisions of UN Regulation No. 16 (paragraph 6.4.1.4.1.) only allow contact of the chest of the dummy driver with the steering assembly, provided that this contact fulfils certain energy-dissipation test requirements and that contact does not occur at a speed higher than 24 km/h. In response to the updated provisions of UN Regulation No. 16 which allow greater forward displacement of occupants, UN Regulation No. 17 will be updated to provide requirements on improved energy-dissipation criteria for those areas of the rear of seats and head restraints where impact of the head of the rear occupant may occur. Given the update to UN R17, this proposal would amend the scope of UN R25 (which has not been updated with regard to energy dissipation) to cover only vehicle categories M2 < 3.5 tons and N1 and mention explicitly that application to N2 and N3 vehicle categories is optional.

In response to proposals to allow greater forward displacement of occupants under UN R16 and the resulting changes in impact energy-dissipation criteria under UN R17, UN R25 (with regard to head restraints) is also subject to change. This proposal would accordingly update a reference in UN R80 to UN R25.

Revised version of the proposal (formal document GRSP/2015/9 ) to extend the scope of UN Regulation No. 129 to include non-Integral child restraint systems (“Universal Booster” or “Specific to vehicle Booster”). This version includes all corrections to the text made by the Informal Working Group on Child Restraint Systems through its September session. (The CRS informal group will discuss this version during its October session.)

Proposal to clarify the texts related to the recently expanded height requirements for the effective upper belt anchorage (Supplement 4 to the 07 series of amendments to Regulation No. 14).

Proposal to introduce provisions to prevent the unintentional opening of rear doors while the vehicle is in motion.

Proposal to expand the application area of the energy absorption criteria for seating in order to facilitate the optimization of seat-belt load limiters by allowing limited occupant contact with these seat areas.

Changes to NCAP testing oblige the use of load limiters on safety-belts with lower threshold values that yield less thorax compression but also allow for greater forward displacement of the occupants. To address the greater forward displacement of rear occupants, UN R17 is under revision to require more stringent energy dissipation performance for those areas of the rear of seats (including the head restraints and parts mounted on the seat) where the head of the rear occupant may come into contact. UN R21 allows for alternative testing of the rear parts of seats (paras. 5.7-5.7.3. ) However, in light of the changes to UN R17, this alternative approach is no longer valid. This proposal would delete the alternate method and expands the scope of UN R21 to include testing of any parts mounted on the seats.

Proposal to introduce an integral fixture for lateral (lie flat, carry cot) child restraint systems.

Proposal to harmonize information in the airbag warning label on the correct installation of Child Restraint Systems (CRS).

Proposal to introduce phase 2 amendments related to the booster seat category (booster seat with backrest) into UN R129. The text includes all modifications proposed by GRSP up to and including its 57th session (Geneva, 18–22 May 2015) as well as those of the IWG CRS up to and including its 53rd session (London, 2 September 2015). The proposal builds on the original UN Regulation No. 129, Corrigendum 1, Supplements 1, 2, 3 and 4 as well as the draft 01 series of amendments to the UN Regulation (ECE/TRANS/WP.29/GRSP/2015/24) Phase 1.

Proposal to limit the use of a booster cushion (booster seat without backrest) with children of a stature greater than 125 cm and the application for type approval of such CRS only in mass Group III for children of mass from 22 kg to 36 kg. The proposal is submitted on behalf of the CRS informal working group.

Proposal to clarify UN R16 provisions for the dynamic testing of rear seat systems, advanced restraint system approval and transitional provisions.

Proposal to clarify that a guide strap which constrains the shoulder strap of the adult seat belt in a position to suit the child in a child restraint system cannot be approved as a separate CRS under UN R44.

Correction of a typo in the test speed of the Russian-language version of the regulation. The text should read 56 km/h rather than 50.

The GTR7 Informal Working Group has been preparing amendments to the regulation with regard to head restraint height, use of the BioRID test dummy, and to improve the overall text. This document provides the current draft text with open items enclosed in brackets.

Further refinements to the formal proposal to amend UN R129 with regard to non-integral CRS. This informal document effectively updates the formal proposal in GRSP/2015/24.

Updated proposal from the CRS informal group to introduce phase 2 amendments related to the booster-seat CRS category (booster seat with backrest) into UN R129. This informal document effectively supersedes the formal proposal in GRSP/2015/31.

Proposal to strip ISOFIX CRS provisions from UN R44 and to cease all new type approvals for CRS under UN R44 from November 2016 in deference to UN R129 on Enhanced CRS.

Status report on the development of global technical regulations addressing the safety of electric vehicles.

Australian proposal to adapt UN R14 to current Australian child restraint system anchorage requirements within the context of enabling the use of UN R14 within the international whole vehicle type approval system.

Australia wishes to accept the new full-width rigid barrier crash test regulation (expected as UN R137) as an alternative to its ADR 69/00; however, Australia wishes to avoid possible confusion over the use of an airbag deactivation device (such as used to turn off an airbag when a child seat is used in the front seat). Therefore, Australia proposes to clarify the provisions of UN R16 to avoid misunderstandings or misuse of such devices along the lines of requirements found in Euro NCAP and US FMVSS 208.

Proposal to correct a reference in UN R134, Annex 3, paragraph 3.4. The reference to paragraph 6.2.2.2. was transposed from GTR No. 13; however, it ostensibly refers paragraph 2.2 of Annex 3 in UN R134.

Background presentation on the draft amendment to the GTR on head restraints. The amendment concerns changes to head restraint height measurement, use of the BioRID test dummy, and improvements to the overall text.

Proposal to introduce provisions for a new fixture to verify space availability of universal lateral facing “lie-flat” Child Restraint Systems.

Completion of missing Integral fixtures for Regulation 129. The Universal Fixture was compatible with 39 of 40 vehicle types (97.5%) tested, but a lateral fixture (lie flat, carry cot) is needed for certain special cases.

Proposal to introduce test procedures from the US FMVSS 302 with regard to the burning behavior/flammability of materials used in child restraint systems. The proposal requests a GRSP decision on the maximum burn rate limit.

US comments on child restraint systems based upon NHTSA’s National Child Restraint Use Special Study (NCRUSS), including recommendations on their installation, use, and testing thresholds.

Presentation in support of the proposal (document GRSP-58-16) to amend the toxicity and flammability declarations via references to EN71.

Updated draft of amendments to the regulation with regard to head restraint height, use of the BioRID test dummy, and to improve the overall text. This document includes revisions made during the 58th GRSP session (December 2015).

Proposal for pictogram label to indicate that booster cushions without a backrest are only suitable for children between 125 and 150 cm tall while boosters with a backrest may be used for children from 105 cm tall.

Responses to questions regarding seat-belt reminders asked during the last GRSP session (May 2015) based upon various selected studies.

Proposal to introduce provisions for “deployable pedestrian protection systems in the bonnet area” (e.g., active hood systems where a pedestrian impact triggers tge hood release to allow for greater impact absorption and exterior frontal airbags).

Proposal to amend the toxicity and flammability declarations via references to EN71 (European safety standards).

Proposal to amend the toxicity and flammability provisions. This proposal runs in parallel with the proposal to amend the 00 series of amendments (document GRSP-58-32).

Proposal to clarify UN R16 provisions for the dynamic testing of rear seat systems, advanced restraint system approval and transitional provisions.

Justification of submissions GRSP/2015/20 and GRSP/2015/29 (proposals to introduce an integral fixture for lateral (lie flat, carry cot) child restraint systems).

Proposal to simplify the UN R16 consumer handbook information pursuant to discussions on the development of UN R129 on enhanced child restraint systems.

Proposal to amend the toxicity and flammability declarations via references to EN71 (European safety standards).

Proposal of draft text to transpose GTR No. 7 (head restraints) into UN R17, including the draft Amendment 1 to GTR 7 addressing use of the BioRID II test dummy, backset measurement method revision, and new head restraint height thresholds.

Proposal to require seat-belt reminders for all seating positions, including rear positions, and to clarify the scope of the regulation.

Proposal to align the definition of “i-Size” child seating used in the two regulations.