Proposal to amend para. 0.1. to introduce the original version, renumber former paras. 0.1. to 0.14. as paras. 0.1.1. to 0.1.14., insert new paras. 0.2. to 0.2.3. to exempt vehicles of categories X without a driver’s seat and Y from the scope and to require vehicles equipped with an Automated Driving System to comply when operated manually by a driver, amend para. 1.3. to exclude vehicles of category Y and vehicles of category X without a driver’s seat, amend footnote 2 to para. 0.2. and footnote 2 to para. 1.1., amend para. 5.1.1. to specify that a Field of Vision Assistant shall be driving related or operation related or both and shall disappear within 500 ms upon initiation of a transition demand when an Automated Driving System feature is active, and amend footnotes 4, 6 to Annex 1, and footnote 4 to Annex 2 to reference the Consolidated Resolution on the Construction of Vehicles document ECE/TRANS/WP.29/78/Rev.8.

Proposal to insert new para. 0.5. to introduce Supplement 1 to take vehicles of categories X and Y into account and vehicles which can be operated either by a driver or an ADS, amend para. 1.1. footnote * to reference ECE/TRANS/WP.29/78/Rev.8, amend para. 1.3. to exclude Vehicle Identification Number, associated vehicle details, location/positioning data, information about any user, and date and time of an event from the scope, and amend para. 5.4. to specify survivability requirements for event data recorders including mounting position and mechanical shock resistance under Option 1 or impact severity demonstration under Option 2 with reference to UN Regulation Nos. 94, 95, and 137.

Proposal to insert new paragraphs 0. and 0.1. to 0.1.4., amend paragraphs 2.6., 2.7., 4.4.1., 5.1., 5.2., and 5.5. to 5.11., insert new paragraphs 2.9. and 2.10., and amend paragraph 1., footnote 1, to extend UN R39 application to vehicles of categories X and Y and vehicles with manual mode operating at speeds above 6 km/h equipped with Automated Driving System Feature of Type 2 (ADSF-2), revise speedometer and odometer requirements accordingly, and clarify provisions related to driver absence and manual driving controls.

Proposal to insert new introductory paragraphs 0. and 0.1. to 0.1.3., amend paragraph 1.1. footnote 1, amend paragraph 2.5., and amend paragraph 4.4.1. footnote 3 to UN R61. The supplement extends application to vehicles of categories X and Y without driver, driver cab, or manual driving controls, and vehicles with manual mode operating above 6 km/h equipped with an Automated Driving System. Provisions related to driver, driver cab, or manual driving controls shall not apply if not covered by the amendment. For vehicles of category Y without a cab, the cab rear panel shall be replaced by a theoretical vertical transversal plane located 350 mm behind the rearmost point of the tyre of the foremost front axle.

Proposal to insert new paras. 0, 0.1 to 0.1.3, amend paras. 1, 5, 6, 6.17.2.1, 16, 17, 17.1.7.1, 17.8.8, 17.8.8.1, 17.10.2, 17.11.4, and 17.13.2.3, insert new para. 14.1.4, and amend Annex 14 para. 6 to address vehicles of categories X and Y and conventional vehicles equipped with an Automated Driving System, extend application to vehicles without driver compartment and manual driving controls, clarify occupant compartment provisions, update electrical connection protection standards, and modify fault indication requirements to include logic signals to ADS and limp home mode activation.

Proposal to insert new paragraphs 0., 0.2. to 0.2.2. to introduce Supplement 1 to the 02 series of amendments taking into account vehicles of categories X and Y and vehicles with a manual mode operating at speeds above 6 km/h equipped with an Automated Driving System, amend footnote 1 to paragraph 1. to reference the Consolidated Resolution on the Construction of Vehicles (R.E.3.), document ECE/TRANS/WP.29/78/Rev. 8, and amend footnote 2 to paragraph 5.3.4.1. to reference Annex 3 to that document.

Proposal to insert new paragraphs 0. and 0.1. to 0.1.2. introducing Supplement 10 to the 01 series of amendments to UN R97 to account for vehicles of categories X and Y and vehicles with a manual mode operating at speeds above 6 km/h equipped with an Automated Driving System, to add footnote 1 at the end of paragraph 1.1., and to amend paragraph 32.4. regarding immobilizer setting procedures.

Proposal to introduce new paragraphs addressing vehicles of category X and vehicles with manual mode operating above 6 km/h equipped with Automated Driving System Feature of Type 2 (ADSF-2). The proposal modifies definitions including “mass in running order,” “passenger,” “member of the crew,” and “automatically-operated service-door.” It inserts new definitions for ADSF-1 and ADSF-2, adds requirements for vehicles equipped with ADSF-2, and amends multiple provisions in Annex 1, Annex 3, Annex 4, Annex 8, Annex 11, and Annex 12 regarding driver’s compartment specifications, door operations, emergency systems, and accessibility features.

Proposal to insert new introductory paragraphs 0. and 0.1. to 0.1.4., amend paragraph 1. – Scope, amend paragraph 1 footnote 1, insert new paragraph 2.10., amend paragraph 4.4.1. footnote 2, amend paragraph 5., and amend paragraph 5.1.4. to UN Regulation No. 121 to take into account vehicles of categories X and Y, as well as vehicles with a manual mode operating at speeds above 6 km/h equipped with an Automated Driving System.

Proposal to:

• Insert new paragraphs 0. and 0.1. to 0.1.4. providing introduction to the 01 series of amendments regarding vehicles of categories X and Y and alignment of provisions for all occupants,
• Amend paragraphs 0.1., 0.1.1., 0.1.3., 1.1. and 2.2., footnote 1 to define terms according to Consolidated Resolution R.E.3.,
• Amend paragraph 2.7. to define passenger compartment,
• Amend paragraph 4.4., footnote 2 to reference Consolidated Resolution R.E.3.,
• Amend paragraph 5.2.1. to require heating systems in each passenger compartment,
• Insert new paragraphs 12. and 12.1. to 12.2.4. providing transitional provisions,
• Amend Annex 5, paragraph 2. to establish surface temperature requirements and allow manufacturers to justify higher temperatures through safety concept demonstration,
• Amend Annex 5, paragraph 2.1. to limit surface temperature to 70°C for uncoated metal or 80°C for other materials,
• Delete Annex 5, paragraphs 2.2. and 2.3.,
• As from official entry into force, Contracting Parties shall not refuse type approvals under the 01 series,
• As from 1 September 2028, Contracting Parties shall not be obliged to accept approvals to the original version first issued after that date,
• Contracting Parties shall continue accepting original version approvals first issued before 1 September 2028 and equipment/parts approvals issued under the original version.

Proposal to insert new paragraphs 0., 0.1. to 0.1.2., 1.4., 2.21., and 5.6., amend paragraph 1.1. footnote 1, paragraph 4.4.1. footnote 4, paragraph 5.1.3.4., and paragraph 5.1.3.5., based on GRSG-131-33. The supplement introduces provisions for vehicles of categories X and Y and vehicles equipped with an Automated Driving System, defines Safety Concept, addresses Field of Vision Assistant requirements, and establishes alternative requirements for category X vehicles with manual modes operated on-board the vehicle not using a driver’s seat.

Proposals for a new GTR and UNR pending before WP.29 in June are based on texts approved by GRVA in January plus text in brackets from EDR/DSSAD and ADS IWG February sessions (presented to WP.29 in WP.29-198-07 and WP.29-198-09). The IWG must send a proposal to GRVA to remove brackets. OPI materials (ADS-20-03 to ADS-20-11) have been consolidated into ADS-20-12/Rev.2 for review to inform structuring of the Guidance and Interpretation Document on ADS. Session discussions address harmonization, compliance, and preparation for July submission.

Proposal to amend UN R158 based on GRSG-131-36. The supplement renumbers the introduction’s first paragraph to 0.1, describing the regulation’s purpose for rear visibility and detection devices. New paragraphs 0.2–0.2.3 address vehicles of categories X and Y, including exemptions for automated driving systems and manual operation modes. Paragraph 1.4 is amended to exempt category Y vehicles and category X vehicles without on-board manual modes. Amendments modify paragraphs 5.4.1, 12.4, 15.1.3, 15.1.4, 15.2.2, and Annex 9, paragraph 1.3.3.2, addressing safety concepts, rear-view field vision requirements, and vehicle load specifications.

Proposal to insert new paragraphs 0., 0.1. to 0.1.2. introducing Supplement 4 to extend application of UN R163 to vehicles of categories X and Y, and vehicles with manual mode operating above 6 km/h equipped with an Automated Driving System, based on GRSG-131-40. The amendment clarifies that provisions related to driver and manual driving controls shall not apply if absent in the vehicle unless already covered. For vehicles equipped with an Automated Driving System, no special provisions or exemptions apply in any driving mode. Amendments also update footnote references to the Consolidated Resolution on the Construction of Vehicles.

The 20th ADS informal working group session and 17th GRVA Workshop on Automated Driving Systems will meet during 27 April-1 May 2026. The session will address proposals to amend the draft Guidance and Interpretation Document covering definitions, performance of the DDT, scope, application for approval, general requirements, interactions between the ADS and its user(s), safety management systems, post-deployment safety, test environments, and certificate of compliance. Additional agenda items include further development of the GTR and UNR and consideration of next steps and future meetings.

The agenda includes installation of belted child restraint systems, including seat belt minimum length feedback and definition of minimum effective belt length, installation of ISOFIX child restraint systems, amendments to UN R107, ISO pictogram wording revision and dimensions, clarification of the table for M₁ vehicles, introduction of seat belt length requirements for belted child restraint systems on M₂ and M₃ vehicles, amendments to UN R145, ISOFIX force reduction, and proposals to improve ISOFIX definitions across UN Regulations.

Initial working draft text to amend UN R107 by inserting a new definition 2.49 for Child Restraint System and adding paragraph 7.7.8.7 to Annex 3 establishing requirements for Child Restraint Systems in vehicles of category M₂ and M₃. Requirements include fitting pictograms to ISOFIX-seating positions meeting UN R145 and UN R173, fitting pictograms to i-Size-seating positions meeting those same regulations, and prohibiting rearward-facing CRS in rearward-facing passenger seats with appropriate pictograms. Three new pictograms are added to Annex 4.

Proposed pictograms for CRS installation under UN R107 specify the following dimensions: ISOFIX pictograms with diameter 65 mm, i-Size pictograms with lateral size 65 mm, and RWF CRS in RWF adult seats pictograms with diameter 65 mm.

Comments on the proposal for a03 series of amendments to UN Regulation No. 160. Modifications include renumbering paragraph 2.2 as paragraph 2.25, deleting paragraph 2.25, and amending definitions for “End of event time,” “Engine throttle, percent full,” “Non-volatile memory,” and other terms. New paragraphs 2.71–2.82 introduce definitions for rollover protection system, advanced emergency braking system, blind spot monitoring system, and driver assistance systems. Paragraphs 5.3.1, 5.3.2, and 5.3.3 are amended to clarify triggering and locking conditions for rollover events and vulnerable road user events, and to establish time zero. Paragraph 5.4.3 clarifies crash test requirements.

The ADS regulations (GTR and UNR) include definitions for reporting thresholds based on EDR triggering. Time-series data recording for heavy vehicles under UN R169 requires triggers and trigger thresholds to record data in specified time periods, which may not immediately precede, follow, or coincide with crashes. Last Stop, Safety Systems, and Sudden Deceleration triggers are unreliable crash indications. Sudden Deceleration is too sensitive for storing time-series data over several months. Optional SRS or a new independent trigger alongside Detected Collision offers the only viable possibility for effective time-series data recording.

The agenda includes discussion of DSSAD regulatory text guidance, EDR Step 2 proposals comments, and EDR for ADS. The next meeting is scheduled for September 15-17, 2026, as a hybrid event in Europe.

Systems with ACSF B2, D and E functionality cannot be approved to UN R79 unless incorporated within a DCAS complying with UN R171. However, these functionalities may exist independently of DCAS, requiring clear distinction. Where not part of DCAS, this must be specified in the EDR regulation. A new EDR data element, “DCAS status”, could encompass ACSF B2, D and E functionalities. These functionalities are now treated either as individual functions or as components of DCAS.