Listing of UN Regulations, including the series level, for inclusion with the scope of the proposed whole vehicle type approval regulation. The entry into force of UN R0 is anticipated for June 2018 with a subsequent update from November 2018.

Informal working group draft document with comments and text mark-up.

Proposal to:
a) Align some definitions and some contents of paragraphs with the other tyre regulations (Regulations Nos. 30, 54, 117, etc.);
b) Include a definition of “manufacturer” extracted from the resolution “R.E.3”;
c) Adopt a common definition and use of the terms “Manufacturer’s name”," Brand
name", “Trademark”, “Trade description” and “Commercial name” and their links;
d) Clarify the designation of the categories of use;
e) Remove the word “normal” in the definition of “Reinforced” tyre to avoid confusion
with the category of use “normal”;
f) Add some information in the certificate to the attention of the Type Approval
Authorities for making easier the relationship between this one and the products.

Proposal to amend Annex 7 and Annex 10. This proposal would:

1. change measurement units for drum speed in Annex 7 from min-1 to km.h-1 to align the requirements with other tyre regulations;
2. correct the wording from “speed category symbol” to “speed symbol” (as defined in para. 2.33);
3. correct the wording from “load capacity index” to “load index” (as defined in para. 2.32);
4. correct a reference to para. 3.2.13. of the Regulation in Annex 7, Appendix 1;
5. correct a boundary value of load index in Annex 7, Appendix 1;
6. delete in paragraph 2.1 in Annex 7, the possibility to use the 2.0 m drum diameter to perform the endurance test.

In Annex 10, the proposal aligns the text with Annex 7 of UN R117, 02 series of amendments, Supplement 5.

The proposal would also clarify provisions for the minimum heights for markings for tyres with nominal rim diameter codes ≥ 20 and nominal section width ≤ 235 and for tyres with nominal rim diameter codes < 20 and nominal section width > 235. The proposal also corrects tables and figures for the use of lowercase letter to denote tyre dimension specifications.

Proposal to develop amendments to Part II of GTR No.16:

1. Addition of new definitions (Section 2);
2. Harmonization of the Load Range concept in relationship to Inflation Pressure (Section 2),
3. Alignment of the provisions for tyre marking and physical dimensions of PC tyres with the most recent developments in UN Regulations Nos. 30 and 54 (Sections 3.3 and 3.5),
4. Harmonization of FMVSS 139 requirements relative to UNECE PSI index (Sections 3.14 and 3.15),
5. Deletion of provisions for physical dimensions of LT/C tyres based on FMVSS 139 (Section 3.20) an UN Regulation No. 54 (Section 3.21) and addition of new harmonized provisions for physical dimensions of LT/C tyres (new Section 3.20),
6. Deletion of provisions for high speed test for LT/C tyres based on FMVSS 139 (Section 3.19) and UN Regulation No. 54 (Section 3.16) and addition of new harmonized provisions for high speed test for LT/C tyres (new Section 3.16),
7. Updates of the Annexes 3 and 6 with regard to the most recent developments in UN Regulations Nos. 30 and 54.

Other topics to be discussed within the informal working group for the Phase 2 of development of UN GTR No. 16 include:

1. Consideration of feasibility of harmonization of endurance test for LT/C tyres (Sections 3.16 and 3.17), and
2. Consideration of feasibility of development of provisions for global tyre marking.

Report on the status of the International Whole Vehicle Type Approval program with regard to regulations under the purview of GRPE.

Germany reviews problems with applying UN specifications for the marking of winter tyres, covering disparities in definitions and performance requirements across the tyre regulations (UN R30, R54, R75, R106, R108, R109 and R117). Therefore, Germany proposes that GRRF work to resolve these disparities and offers two possible solutions: 1) Introduce the definition of "Snow tyre for use in severe snow conditions” and the related performance and marking requirements established under UN R109 and R117 into UN R30, R54, R75, R108, and (possibly) R106; 2) Amending UN R117 to extend the scope of its snow performance criteria to additional tyre classes and categories, such as special tyres (POR, MPT), all terrain (AT) tyres, and retreaded tyres for passenger cars.

The regulation of lighting includes individual regulations for specific lighting devices (headlamps, direction indicators, etc.), for light source (filament, gas, LED), and for installation (UN R48). The proposed UN R0 on the type approval of whole vehicles requires submission of approval certificates for components and systems to be included within the whole vehicle approval. Vehicle manufacturers work directly with UN R48 approvals, but lamp and device approvals are generally handled by lighting suppliers. UN R48 includes provisions for listing approvals of lighting units, but not for approvals of light sources (presently UN R37, R99, and R128). In order to avoid excessive administrative burdens, GTB proposes that the regulations covering light units include provisions to confirm their approval under the applicable light source regulations such that UN R48 approvals would represent approval of the vehicle lighting systems under both device regulations and light-source regulations.

European Commission note on the publication of a recent study carried out by the environmental advocacy group Transport & Environment on the performance of indirect TPMS.

OICA presentation on its field study to develop data on TPMS performance and comments on the T&E test procedure for evaluating indirect TPMS. In particular, OICA states that the T&E methods did not represent normal use cases or correspond to the intent of UN R141 to address slow diffusion of air that leads to underinflation.

Proposal to add tyre and rim dimensions and to add a diameter code ‘d’ of 28.5 (Please note that the “28.5.5” shown in the table is a typo and should be “28.5”).

Proposal to amend the transitional provisions of the formal proposal to update UN R106 (GRRF/2017/9).

Revised proposal for a “Mutual Resolution on dimensions of tyres of certain size designations”.

Revised version of the proposal to include UN R106 tyre dimensions in a Mutual Resolution on tyre sizes. The amendment to the table listing the allowed nominal rim diameters (d) is needed to allow the approval of standardized sizes which exist and are already on the waiting list for type approval.

Amendment, per GRRF discussions, to remove the proposal to require the use of kPa markings and the related transitional provisions from the broader set of amendments to UN R106 proposed in document GRRF/2017/9.